Canon PIXMA MP960 Quick Start Manual page 115

indows® M rivers
~nsta~~ati
n
WNote
• The screens below refer to Windows XP Service Pack 2 installation.
Screens may vary depending on the operating system you are using.
• For Windows XP or Windows 2000, log on to Windows as a member of the
Administrators group before continuing.
• Before installing the driver, disable all anti-virus programs and automatically
loading programs.
Turn off the machine.
(1) Press the ON/OFF button.
(2) Make sure that the POWER lamp stops flashing.
Read the License Agreement carefully and click Yes.
Follow the on-screen instructions to install the software.
If a message asking for your confirmation to restart your
computer appears, click OK.
When the Printer Connection screen appears, connect the
machine with a USB cable, then turn the machine on. The
software will begin identifying the printer port being used.
Important
If you cannot go to the next procedure after 3 minutes, refer to "TroubleD
shooting" instructions in the User's Guide onmscreen manual.
canon
Installation completed successfully.
If Restart is displayed, make sure that the Restart the system now
(recommended) check box is selected, then click Restart.
When the Installation completed successfully screen
appears, click Exit.
Follow the on-screen instructions to register your product.
WNote
When the User Registration screen appears, follow on-screen instructions to
register your product. You will need your product serial number, which is located on
the inside of the machine. See Step 1- (f) on the front page.
Now you have completed installation of the
software.
Turn the computer on and start Windows.
Important
If you see the Found New Hardware V\fizard, remove the USB cable. Click
Cancel to quit the screen. Next, turn off the rnachine. Then proceed from step
3 to install the MP Drivers.
When the main menu appears, click Easy Install.
WNote
• Select Easy Install in order to install the MP Drivers, on-screen manuals, and
application software. Select Custom Install in order to choose the options you
would like to install.
• To install Adobe® RGB (1998), click Custom Install and follow the on-screen
instructions. If you are using Windows Me/98, Adobe RGB cannot be installed.
Cal1O-U PIXMA MP960
Insert the Setup CO=ROM. The setup program should run
automatically.
WNote
The setup program should run automatically. If the installer in the CD-ROM does
not run automatically, click Start and select My Computer, then double-click the
CD-ROM icon
t'
When the list of applications to install appears, confirm the
contents, click Install.
WNote
Move the cursor over items to display explanations of each application.
Part no. QT5-0669-V01 © 2006 Canon Inc. Microsoft and Windows are either registered trademarks or trademarks of Microsoft Corporation in the U.S. and/or other countries. Macintosh and Mac are t
States and/or other countries. All other product and brand names are trademarks of their respective owners. Specifications subject to change without notice.