Table of Contents
Advertisement
Network Camera User's Manual
Application
Schedule mode
(1) "Every day"
(2) "Week day"
(3) "Selected day"
Schedule information
Enter the "Start time" and "Stop time" for day mode.
(1)
Note that the time format is [hh:mm] and is expressed in 24-hour clock time. By
default, the start and end time of day mode are set to 01:00:00 and 23:59:59.
(2) "Sun"/"Mon"/"Tue"/"Wed"/"Thu"/"Fri"/"Sat"
week to perform the application.
(3) ―Start day‖ and ―Start time‖ as the start timing the time. ―End day‖ and
―End time‖ as the end timing the time
Enable/Disable every day application.
Enable/Disable week day application.
Enable/Disable selected day application.
48/62
Select the days of the
Advertisement
Table of Contents
