Configuring The Lpr Settings - Konica Minolta bizhub C280 User Manual

6.1 Mac OS X 10.2/10.3/10.4/10.5
7
Reference
-

Configuring the LPR settings

[TCP/IP Settings] for the machine
Specify the IP address for the machine.
[LPD Setting] for the printer
Before using LPR printing, enable LPD printing in [LPD Setting] for the machine.
d
For details on specifying the IP address for the machine, refer to the [User's Guide Network Administrator].
For details on the [LPD Setting] for the machine, refer to the [User's Guide Network Administrator].
Configuring the TCP/IP settings for the computer
Configure the TCP/IP settings for the Macintosh computer connected to the printer.
1
2
3
4
5
6
Adding a printer
1
2
3
4
5
bizhub C360/C280/C220
Downloaded From ManualsPrinter.com Manuals
Click [Add].
When the selected printer is registered in the [Print & Fax], the setting procedure is completed.
% If the [Installable Options] window appears, proceed to change the option settings as necessary.
For details, refer to page 10-4.
For OS X 10.4, you can also add a printer by clicking [Add] in the [Printer Setup Utility] window.
Reference
In the [Apple Menu], select [System Preferences...].
Click the [Network] icon.
The Ethernet setting window appears.
% For OS X 10.5, select [Ethernet], and then click [Advanced...].
% For OS X 10.4, select [Built-in Ethernet], and then click [Configure...].
Click the [TCP/IP] tab.
Configure the settings including the IP address and subnet mask according to the settings of the net-
work to which the Macintosh computer is connected.
Click the close button at the top left corner of the window.
% When the [This service has unsaved changes] message appears, click [Apply].
In the [Apple Menu], select [System Preferences...].
Click the [Print & Fax] icon.
Click [+] on the [Print & Fax] window.
Click [IP] or [IP Printer].
In [Protocol:], select [Line Printer Daemon - LPD].
6
6-6