Konica Minolta bizhub C280 User Manual page 52

5.2 Windows XP/Server 2003
9
10
11
12
13
14
15
16
17
18
19
bizhub C360/C280/C220
Downloaded From ManualsPrinter.com Manuals
In the [Printer Name or IP Address:] box, enter the IP address for the machine, and then click [Next >].
% If the [Additional Port Information Required ] dialog box appears, go to Step 10.
% If the [Finish] screen appears, go to Step 13.
Select [Custom], and then click [Settings:].
Change the settings according to the port, and then click [OK].
% For LPR connection, select [LPR], and then enter "Print" in the [Queue Name:] box.
% You must discriminate between upper and lower case letters when entering it.
% For Port9100, select [Raw], and then enter a RAW port number (initial setting: [9100]) in the [Port
Number:] box.
Click [Next >].
Click [Finish].
[Add Printer Wizard] appears.
Click [Have Disk...].
Click [Browse...].
Select a desired printer driver folder in the CD-ROM, and then click [Open].
% Select a folder according to the printer driver, operating system, and language to be used. Selecta-
ble printer drivers:
PCL driver, PS driver and fax driver
Click [OK].
The [Printers] list appears.
Click [Next >].
Follow the instructions on the pages that follow.
% To use a network connection, perform a test print after the network settings have been configured.
5
5-15