Konica Minolta bizhub C280 User Manual page 79

6.1 Mac OS X 10.2/10.3/10.4/10.5
Configuring the TCP/IP settings for the computer
Configure the TCP/IP settings for the Macintosh computer connected to the printer.
1
2
3
4
5
6
Adding a printer
1
2
3
4
5
6
bizhub C360/C280/C220
Downloaded From ManualsPrinter.com Manuals
In the [Apple Menu], select [System Preferences...].
Click the [Network] icon.
From [Show], select [Built-in Ethernet].
Click the [TCP/IP] tab.
Select the [Configure:] item and configure the settings including the IP address and subnet mask ac-
cording to the settings for the network to which the Macintosh computer is connected.
Click the close button at the top left corner of the window.
% When the [This service has unsaved changes or Apply configuration changes ] message appears,
click [Apply].
Select [Macintosh HD] - [Applications] - [Utilities] where the driver has been installed, and then double-
click [Printer Setup Utility] or [Print Center] to open it.
When the [You have no printers available. ] window appears, click [Add]. When the printer list appears,
click [Add].
% If available printers have already been specified, the [You have no printers available. ] window does
not appear.
Select [IP Printing] for the connection method.
For OS X 10.3, select [LPD/LPR] for [Printer Type:].
In [Printer Address:], enter the IP address for the machine.
From [Printer Model], select [KONICA MINOLTA], select the desired model from the list of model names,
and then click [Add].
When the selected printer is registered in the [Printer List], the setting procedure is completed.
6
6-13