Kodak EasyShare D830 Extended User Manual page 42

Troubleshooting and support
Resetting the clock and calendar after losing power
If you turn off the power on the frame or otherwise lose power for half a day or more,
the clock and calendar return to the factory setting and the automatic on/off times, if
set, are disabled.
When you turn the frame back on, the set time and date screen appears.
1 Set the clock.
Tap the arrow lights or slide to select the current time.
2 Set the date.
Tap the down arrow to highlight Date, then tap the arrow lights or slide to select
the current date.
3 Tap the down arrow to highlight Save, then tap OK.
The time is reset and the automatic on/off times (if set) are re-enabled. It is not
necessary to reset the on/off times.
NOTE: If you exit the set time screen without setting the time, you can manually reset the clock and
re-enable the automatic on/off times
36
(see page 6). It is not necessary to reset the on/off times.
www.kodak.com/go/support