Page 1
KODAK EASYSHARE Digital Frame Extended user guide P750/P850 www.kodak.com For help with your digital frame, www.kodak.com/go/digitalframesupport...
3 back button 4 Memory card slot - SD/SDHC/MMC/MS/MS Pro/XD 5 Power button * purchase USB cable separately www.kodak.com/go/support 6 USB high-speed device—connect to computer* 7 USB high-speed host—connect to USB flash drive or hard drive 8 DC-In 5V , behind stand Stand Data plate with serial number, behind stand—...
11). The Pictures icon changes to indicate your current internal memory, (see page (see page 18). (see page 17). (see page 24). (see page 25). Picture Transitions Set Finder Modes to highlight an icon, then press (see page 18). memory card, (see page 19). www.kodak.com/go/support Settings USB flash...
3 Changing settings and more ...19 Changing frame settings ... 19 Settings ... 20 Setting the time, date, and on/off times... 22 Setting transitions between pictures ... 24 Setting viewing modes ... 25 Upgrading your firmware (recommended)... 26 Changing your frame orientation ... 27 www.kodak.com/go/support...
Page 6
Re-setting your frame after losing power ... 31 5 Appendix ...32 Digital frame specifications... 32 Important safety instructions ... 33 Additional care and maintenance ... 34 Replacing the remote control battery ... 34 Limited warranty ... 35 Regulatory compliance and advisory ... 37 www.kodak.com/go/support...
Getting started Welcome to your KODAK EASYSHARE Digital Frame. Viewing and sharing your pictures couldn’t be simpler! Attaching/removing the stand NOTE: Your frame may have been shipped with the stand already attached. Attach Fit the tabs on the back of the stand into the slots on the frame and slide up to lock.
Do not use this power cable with other devices, including digital cameras. The frame automatically turns on when you plug it in for the first time. If more than one plug is included, use the plug for your type of power outlet. www.kodak.com/go/support...
Navigating with the remote control NOTE: The buttons on the remote are also available on the back of the frame and function identically. Storing the remote control www.kodak.com/go/support Press the button to: Navigate left or view the previous picture Navigate right or view the next picture...
To change the language at a later time: 1 Press OK to pause a slideshow and display the control panel icons. 2 Press to highlight 3 Press to highlight Language, then press OK. 4 Press to highlight your language, then press OK. (Settings), then press OK. www.kodak.com/go/support...
During the first 24 hours, your frame may turn on and off at unexpected times. If you prefer, you can turn off the sensors—then turn the frame on and off manually or set daily automatic on/off times. For details, see www.kodak.com/go/support page page Getting started...
Inserting a memory card To insert a card, push it firmly into the slot. To remove a card, pull it out of the slot. SD/SDHC (SECURE DIGITAL/SECURE DIGITAL High Capacity) MMC (MULTIMEDIA Card) MS (MEMORY STICK) MS Pro (MEMORY STICK) www.kodak.com/go/support...
Inserting a USB device Supported USB devices include a flash drive, card reader, hard drive*, etc. USB devices are sold separately. *External hard drives must be self-powered. www.kodak.com/go/support Getting started...
All pictures in source—copy all of the pictures on the card or USB device (source represents the type of card or device that’s inserted in the frame). 4 Press OK. The slide show plays while pictures are being copied. www.kodak.com/go/support...
Page 15
Copying pictures from a digital camera 1 Remove the memory card (containing pictures) from your camera, and insert it into the frame. 2 Follow the copy directions on www.kodak.com/go/support Purchase USB cable separately page 8 (highlight All pictures, then press OK).
Turn on the frame. Insert a memory card, USB flash drive, or other USB device (see Your pictures start playing automatically. To copy pictures into the frame’s internal memory, press OK and follow the screen instructions page www.kodak.com/go/support page (see...
All—searching and viewing all pictures Select and press OK. All of the pictures in the current picture source are displayed as thumbnails. www.kodak.com/go/support 1 Press OK to pause a slideshow and display the control panel icons. 2 Press to highlight...
Page 18
1 Press to highlight the first folder in the list. 2 Press to navigate through the folders. To move even faster, press and hold an arrow button. A preview slide show plays of the pictures in the highlighted folder. www.kodak.com/go/support...
Page 19
5 Press OK again to start the slide show. Keywords—searching and viewing by keywords KODAK Digital Cameras (and others) let you tag pictures with keywords. Select and press OK. If there are any pictures tagged with keywords in the current picture source, they are listed here.
Page 20
Viewing pictures People—searching and viewing by people The latest KODAK Digital Cameras let you identify people in your pictures. Select and press OK. If there are any identified people in the current picture source, they are listed here, grouped by person.
4 Press OK to display the highlighted thumbnail at full-screen. 5 Press OK again to start the slide show or press the back button to return to thumbnails view. www.kodak.com/go/support 1 Press to highlight the first thumbnail. 2 Press the arrows to navigate through the thumbnails.
Available viewing modes are: single picture, Collage, Clock, and Calendar. There are several styles of Clock, Calendar, and Collage modes available. To change the style, highlight the Set Modes icon Setting viewing modes, page Calendar Clock Collage Press mode button from the main control panel. www.kodak.com/go/support Single picture...
1 Press OK to pause Picture Finder play and display the main control panel icons. 2 Press to highlight Random pictures resume playing. www.kodak.com/go/support to automatically play the pictures that were taken on the (Picture Finder), then press OK. to highlight a picture in the collage.
All pictures in folder—delete all the pictures in a folder (folder represents the folder name, if there are any folders on the frame). All pictures on frame—delete all of the pictures on the frame. 4 Press OK. www.kodak.com/go/support (Delete), then press OK.
Options selected from a list Options selected with radio buttons www.kodak.com/go/support (Settings), then press OK. 4 If the options are displayed in a list (no radio buttons), press to highlight an option, then press OK. 5 If the options are selected with radio buttons, highlight your choice, then highlight Save and exit and press OK.
Manually set on/off time—set automatic on and off times. Save and exit—highlight, then press OK to save your selections and exit the screen. behind your pictures when your frame is in Picture book viewing mode (see page 22). 22). 25). www.kodak.com/go/support...
Page 27
Changing settings and more Options Red-eye removal—automatically check for red-eye in your pictures and remove it. Default is On. KODAK PERFECT TOUCH Technology—automatically enhance your pictures to look their best on your frame. Default is On. Intelligent zoom and pan—automatically zoom in and center on faces and pan the picture across the screen.
4 Press OK. The Date screen appears. 1 Press to change the date format, month, day, and year. 2 Press to move to the next entry. 3 Press OK. The On/Off Times screen appears. www.kodak.com/go/support...
Page 29
Manually set on/off times, the activity sensors are deselected. Manually set auto on/off times You specify the times you want your frame to automatically turn on and off. www.kodak.com/go/support Changing settings and more Activity sensors (default)—energy saver, frame turns on when it detects light (artificial and daylight) or sound, turns off when the room is dark and quiet.
Medium 2 fade. pictures change once every 5 seconds; transition effect is a Fast gentle motion to the left. 1 Press OK to pause a slide show and display the control panel icons. 2 Press to highlight www.kodak.com/go/support (Transitions), then press...
5 Press OK to exit and save your selections. Now when you press the mode button the style that you’ve selected. www.kodak.com/go/support Changing settings and more 1 While a slide show is playing, press OK to pause play and display the main control panel icons.
The upgrade may take up to 5 minutes. When the upgrade is complete, your frame automatically restarts. CAUTION: Do not turn off the frame or remove the memory card or USB flash drive until the upgrade is complete and the frame has restarted. Changing frame settings, page 19 www.kodak.com/go/digitalframedownloads. (Settings), then press OK. www.kodak.com/go/support...
Hanging your frame on the wall To hang your frame on the wall, remove the stand, then use wall anchoring hardware (not included) to securely mount the frame to the wall. Frame features, page i for the location of the mounting holes. www.kodak.com/go/support...
Gently wipe the frame and screen with a clean, dry, lint-free cloth. For fingerprints on the frame, apply light pressure. Learning more about your frame www.kodak.com/go/digitalframes www.kodak.com/go/digitalframesupport www.kodak.com/go/stepbystep Learn more about your frame. Order accessories.
Remote control doesn’t work. Frame freezes up or doesn’t work properly. www.kodak.com/go/support www.kodak.com/go/digitalframesupport Make sure the power cable that was included with your frame is connected securely (see page Unplug the power cable for 5 seconds, then reconnect the cable.
Page 36
Insert a different card or device Turn off the frame, then turn it back on. Press and hold the power button (for about 2 seconds), then release. If the problem persists, contact customer support help, at www.kodak.com/go/digitalframesupport. www.kodak.com/go/support (see page 32). (page...
When the power is restored and the frame turns on, you are prompted to reset language, time, date, and on/off times. See Setting the time, date, and on/off times, page www.kodak.com/go/support...
AC adapter 110-240V AC 50/60 Hz AC adapter, 5V DC @ 2 Amp Battery, remote Lithium coin type CR2016, Kodak P/N 4H7029 Communication with USB devices USB cable High Speed Type A (for connecting a USB device), purchase separately USB cable series A to series mini-B (for connecting to a computer), purchase separately...
If the LCD breaks, do not touch the glass or liquid. Contact Kodak customer support. The use of an accessory that is not recommended by Kodak may cause fire, electric shock, or injury. For approved accessories, go to www.kodak.com/go/accessories.
Appendix Remove the battery when the product is stored for an extended period of time. In the unlikely event that battery fluid leaks inside the product, contact Kodak customer support. In the unlikely event that battery fluid leaks onto your skin, wash immediately with water and contact your local health provider.
If Kodak is unable to repair or replace a Product, Kodak will, at its option, refund the purchase price paid for the Product provided the Product has been returned to Kodak along with proof of the purchase price paid.
Unless a specific Kodak warranty is communicated to the purchaser in writing by a Kodak company, no warranty or liability exists beyond any minimum requirements imposed by law, even though defect, damage, or loss may be by negligence or other act.
This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. Hereby, Eastman Kodak Company declares that this KODAK Product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.
(separate from municipal waste). For more information, contact your retailer, collection facility, or appropriate local authorities; or visit www.kodak.com/go/recycle. (Product weight: P750, 517 g. P850, 677 g.) Australian C-Tick N137...
Page 45
Appendix China RoHS ENERGY STAR Product ® ENERGY STAR qualified product. www.kodak.com/go/support...
Page 46
12 date, setting, 5, 22 deleting pictures from frame, 18 display picture order by, 21 disposal, recycling, 34 download firmware, 26 duration, setting, 24 energy saver, auto on/off, 23 Energy Star product, 39 error messages, 30 www.kodak.com/go/support...
Page 47
32 copying to, 8 playing from, 10 keywords, searching by, 13 www.kodak.com/go/support KODAK PERFECT TOUCH, 21 landscape, change orientation, 27 language, setting, 4, 21 light and sound sensors, 23 main control panel, ii memory card. See card, memory...