Kodak EasyShare D830 Extended User Manual page 33

Attach a clip-style standard picture frame
CLIP-style
Use the clips that are attached to the standard picture frame.
Use the included self-stick foam spacers to fill any gap between the digital frame's
back panel and the clips on the standard frame. Stack the spacers if necessary.
Avoid adding more spacers than necessary to prevent excessive force against the
clips.
If necessary:
Tighten the screws to secure the clips. Be careful not to over-tighten.
www.kodak.com/go/support
Glass removed
Doing more with your frame
Foam spacers
27