5) Shift the breaker switch [1] back to the ON position.
Advise the user that the breaker switch is fully to the ON position. If it is found between ON and OFF positions, it must first be shifted to the OFF position
and then to ON.
6) Turn off the main power switch.
1.2.5 Safety
1.2.5.1 Safety of the Machine's Laser Unit
Often, laser light can prove to be harmful to the human body. The machine's laser scanner unit is shielded in a protective housing and by external covers
so that its light will not escape outside the machine as long as the machine is used in normal operating conditions.
1.2.5.2 CDRH Regulations
The Center for Devices and Radiological Health of the US Food and Drug Administration put into forth regulations intended for laser products. Under the
regulations, laser products that are produced on and after August 1, 1976, may not be sold within the US unless they are appropriately certified. The
following is a label issued to certify compliance with the regulations and must be found on all laser products sold in the US.