Oki C3200n Service Manual page 181

Message
Service call
042:Error
~
044:Error
Service call
051:Error(C5400)
Service call
052:Error(C5400)
Power off/on
070:Error(C5400)
Power off/on
072:Error xx
Power off/on
073:Error xxxxxxxx
Power off/on
074:Error xxxxxxxx
075:Error xxxxxxxx
42615101TH Rev.8
Table 7-1-2 Service Call Error (2/7)
Cause
Flash File System Failed access to Flash set
Error directly on CU board.
CU Fan Error Is CU Fan connector set prop-
Abnormal CPU erly?
cooling fan on CU Is error recovered by replacing
board. fan?
DMA Abort Error
detected in Image Does error reoccur?
processor.
PSE firmware
fault detected. Does error reoccur?
Engine I/F Error Is CU assembly set properly?
I/F error between
PU-CU.
Is error recovered by replacing
ARC/SPY/SPA board?
Video Error [C5200/C5150/C3100]
Fault detected Is CU assembly set properly?
when image data
is extended.
Fault again?
[C5400]
Is CU assembly set properly?
Video Error Is CU assembly set properly?
Fault detected
when image data
is extended.
Error Description
Oki Data CONFIDENTIAL
Solution
Run forced initialization
of Flash.(Note that NIC-
F/W and Mac address
is deleted. After the
initialization, it is need
to download NIC-F/W
and/or Mac address by
Maintenance utility.)
In the case of before
CU-F/W G1.26/X1.26,
Press "+", "-", "CAN-
CEL" to turn power ON.
And after CU-F/W
G1.27/X1.27, execute
FLASH FORMAT of
MAINTENANCE MENU
of SYSTEM MAINTE-
NANCE MENU.
Release buttons when
[FLASH FORMAT]
appears, wait until [ON-
LINE] (2min) and
Replace ARC/SPY/SPA
board if symptom does
not change.
No Connect properly.
Yes Replace fan.
No Replace SPA board.
Power OFF/ON.
Yes Replace SPA board.
Power OFF/ON.
Yes Replace SPA board.
No Set properly.
Yes Replace ARC/SPY/SPA
board.
No Replace PU board (PRN)
No Set properly.
Yes Replace to high-
performance PC or
drop resolution of data
and print again.
Yes Replace ARC/SPY board
No Set properly.
Yes Replace SPA board.
No Set properly.
Yes Replace ARC/SPY/SPA
board.
181 /