Oki C3200n Service Manual page 128

Item
1 PU (PRN) Board Copying EEPROM of the PU board
Replacement Copying LED head correction data*1
Adjustment Purpose: Copy the above data to
another board when it is necessary to replace
to another PU board due to maintenance
replacement
2 PU Serial Number Reprogramming printer serial number
Setting recorded on PU
Adjustment Purpose: Set for a board replaced
for maintenance when it is impossible to copy
EEPROM of the PU board (I/F error etc.)
3 Factory/Shipping Change between Factory mode and Shipping
Mode mode
Adjustment Purpose: Set for a board replaced
for maintenance when it is impossible to copy
EEPROM of the PU board (I/F error etc.) In
this function, Shipping mode is needed since a
board for maintenance is usually Factory
mode as the default
4 Download of LED Programming of LED head correction data
head correction Adjustment Purpose: Download correction
data*1 data prepared by the outside for the device
when a head not having EEPROM for
correction inside the head is used
(Fig No.42631901)
5 CU Reprogramming an EEPROM setting value of
(ARC/SPY/SPA) the CU board
Board Adjustment Purpose: Reprogram EEPROM
Replacement
data to another board when it is required to
exchange to another CU board for
maintenance replacement
6 Setting of Serial Reprogramming serial number selection
Number recorded in CU, output mode, and device
Information serial number
7 Setting Information Check of serial number information and
of Board Items Factory/Shipping mode
8 Update of USB Updating USB Software
Software
9 Update of NIC Updating NIC Software
Software
10 Update of NIC Updating NIC Web Page
Web Page
11 Mac Address Mac Address Setting
Setting
42615101TH Rev.8
Table 5-2 Maintenance Utility Adjustment Items (1/3)
Adjustment
Oki Data CONFIDENTIAL
Operation on
Section No. of the
Operator Panel
Maintenance Utility
(Section No. corresponds to
Operation
the Maintenance manual)
Section 2.4.1.1.1 Invalid operation
Section 2.4.2.1.1
when there is a
copy of LED head
correction data
Section 2.4.1.1.2.1 Invalid operation
Section 2.4.1.1.2.2 Section 5.4.2.10
Section 2.4.1.1.6.4
Section 2.4.2.1.2.1 Invalid operation
Section 2.4.1.1.3 Invalid operation
Section 2.4.1.1.4.3 Invalid operation
Section 2.4.1.1.7 Invalid operation
Section 2.4.2.2.1 Invalid operation
Section 2.4.2.2.2 Invalid operation
Section 2.4.2.2.3 Invalid operation
Section 2.4.2.2.4 Invalid operation
128 /