Oki C3200n Service Manual page 130

Item
23 Switch Scan Executing the switch scan test
Test*2 Adjustment Purpose: Check operation of each
sensor
24 Motor and Clutch Executing of motor and clutch test
Test*2 Adjustment Purpose: Check operation of each
motor and clutch etc
25 Color Registration Executing color registration test
Test*2
26 Density Executing density adjustment test
Adjustment Test*2
27 Setting of Auto Setting of auto density adjustment controller
Density parameter
Adjustment
Controller
Parameter*2
[Prohibited to use]
28 NVM Initializing NVM
Initialization*2
[Prohibited to use]
29 Counter Display*2 Confirming consumables, consumable records
and waste toner counter
30 Local Parameter Confirming change a mode between Factory
Setting*2 and Shipping mode and a Fusing state
31 Engine Parameter Setting a setting value of Engine parameter
Setting*2 items
*1 Restriction of Functions.
*2 Operation is available only for C3200/C3100 (A model without an operator panel)
Note! Do not perform operations or settings for items of [Prohibited to use], or an improper
operation may be result.
42615101TH Rev.8
Table 5-2 Maintenance Utility Adjustment Items (3/3)
Adjustment
Oki Data CONFIDENTIAL
Operation on
Section No. of the
Operator Panel
Maintenance Utility
(Section No. corresponds to
Operation
the Maintenance manual)
Section 2.4.1.5.1 Section 5.4.2.3
Section 2.4.1.5.2 Section 5.4.2.4
Section 2.4.1.5.3 Section 5.4.2.6
Section 2.4.1.5.4 Section 5.4.2.7
Prohibited to use Prohibited to use
Prohibited to use Prohibited to use
Section 2.4.1.5.7 Section 5.4.2.8
Section 5.4.2.9
Section 5.4.2.12
Section 2.4.1.5.8 Section 5.4.2.10
Section 2.4.1.5.9 Section 5.4.2.11
130 /