Elation DMX-SOLO 256 User Manual page 25

2. Operation Guide
2.8 Receive Record Data
I N
SCENE
END
BLACKOUT
2.9 Master /Slave 1 /Slave 2 Mode
1. When Master LED is lit continuously, this unit serves as a Master unit, all other
Slave units shall be subject to this unit. When Master LED flashes, another shall
override this unit and serves as a Master unit, this unit will separate from the linkup
and stand alone.
2. When Slave 1 LED is lit continuously, this unit serves as a Slave unit and sends
DMX address 001-256, there is not a Master unit in the linkup.
When Slave 1 LED flashes, this unit serves as a Slave unit and is subject to the
Master unit in the linkup.
3. When Slave 2 LED is lit continuously, this unit serves as a Slave unit and sends
DMX address 257-512, there is not a Master unit in the linkup.
When Slave 2 LED flashes, this unit serves as a Slave unit and is subject to the
Master unit in the linkup.
3. Press Scene button to receive record data, the Segment
Display shall show "IN" indicating this unit is receiving
file data. Any button doesn't work until the Segment
Display shows "End".
4. When the Segment Display shows "End", tap the
Blackout button to go back.
22