2. Operation Guide
2.4.4 Modify steps of a Memory
3
RECORD
2.5 Playback one or more Chases or Memories
CHASE
3
CHASE 1-40
19
6. Tap Record button, all LED's shall flash briefly three
times indicating you've changed fade time of the step.
7. Tap Blackout button, then you can continue steps 2-6
to change fade time of other steps.
1. Apply power on, tap Chase button causing its LED
to light or flash, the Segment Display shows "ST00".
2. When Chase LED is lit, only one Chase or Memory
can be selected. Tap one of Chase 1-40 or Memory
1-8 buttons containing scenes, its LED shall be lit
indicating the chase or memory is playing.