Elation DMX-SOLO 256 User Manual page 17

2. Operation Guide
2.4.1 Record steps into a Memory
C H A S
RECORD
MEMORY 1-8
K
SCENE
SCENE 1-40
2. Press and hold down Record button for 3 seconds,
the Record LED's will flash indicating recording is
active, the Segment Display reads "CHAS", and the
recorded Memories will be indicated by the lit LED's
near them.
3. Tap the button(Memory 1-8) you wish causing its
LED to flash, the Segment Display shows "ST00"
or "ST01".
"ST00" refers to the Memory is empty, and "ST01"
refers to the Memory contains scenes and the current
scene(the first step) is playing.
4. Tap Scene button, these three LED's of Scene, Chase
and Record shall flash in unison, the Segment Display
shows "bk01" and the scenes recorded in the bank is
indicated by their lit LED's.
5. Tap one of 1-40 buttons causing its LED to flash,
which means you've selected the scene.
You may use UP/DOWN button to select the bank
that contains the scene you want.
14