Removing A Cabinet Door - Whirlpool Personal Valet PVBN600 Service Manual

NOTE: Sharp edges may be present.
1. Unplug the clothes vitalizer or disconnect
the power.
Bottom Door Hinge Bracket

REMOVING A CABINET DOOR

Top Door Pin
2. Remove the screw and hex cap nut from
the bottom pivot bracket.
3. Remove the two bottom door hinge bracket
screws. Push down on the collector and
pull the door and bracket out just far enough
to clear the collector.
Bottom Pivot
Bracket Screw
w/Hex Cap Nut
Collector
4. Slide the top door pin out of its pivot
bracket and remove the door.
Top Door Pin
& Plastic Sleeve
NOTE: If you are replacing the door, remove
the plastic sleeve from the top pin for use on
the replacement door.
5-8
Screws
Bottom Door
Hinge Bracket
Hex Cap Nut
Top Pivot Bracket