Table of Contents
Advertisement
Welcome to Follett
Follett equipment enjoys a well-deserved reputation for excellent performance, long-term reliability and
outstanding after-the-sale support. To ensure that this equipment delivers that same degree of service, we ask
that you take a moment to review the installation portion of this manual before beginning to install the unit. Our
installation instructions are designed to help you achieve a trouble-free installation. Should you have any
questions or require technical help at any point, please call our technical service group at (800) 523-9361 or
(610) 252-7301.
Before you begin
After uncrating and removing all packing material, inspect the equipment for concealed shipping damage. If
damage is found, notify the shipper immediately and contact Follett Corporation so that we can help in the filing of
a claim, if necessary.
Check your paperwork to determine which model you have. Follett model numbers are designed to provide
information about the type and capacity of Follett ice dispensing equipment. Following is an explanation of the
different model numbers.
12CI400A
!
Important cautions
• Do not tilt any unit further than 30° off vertical during uncrating or installation
• Dispenser bin area contains mechanical, moving parts. Keep hands and arms clear of
this area at all times. If access to this area is required, power to unit must be
disconnected first.
• Follett recommends a Follett QC4-FL4S water filter system (item# 00130299) be
installed in the icemaker inlet water line
• Prior to operation clean and sanitize the dispenser in accordance with instructions found in
this manual
• Ice is slippery. Be sure counters and floors around dispenser are clean, dry and free of ice.
• Do not block right side air intake or top air exhaust
Condenser type, A = air-cooled
Icemaker capacity in lbs per day
Icemaker location, I = integral
Dispenser configuration, C = countertop, H = wall mount
Approximate storage capacity in lbs
Advertisement
Table of Contents
Troubleshooting
