Grandstream Networks GXP2124 User Manual page 50

Call Log
Account Ring Tone
Match Incoming Caller ID
Ring Timeout
Send Anonymous
Anonymous Call
Rejection
Auto Answer
Allow Auto Answer by
Call-Info
FIRMWARE VERSION 1.0.6.11
menu are supported. And ForwardAll soft key will not be displayed in LCD for
Account 1.
Configures Call Log setting on the phone. You can log all calls, only log
incoming/outgoing calls or disable call log. The default setting is "Log All
Calls".
Allows users to configure the ringtone for the account. Users can choose from
different ringtones from the dropdown menu.
Specifies matching rules with number, pattern or Alert Info text. When the
incoming caller ID or Alert Info matches the rule, the phone will ring with
selected distinctive ringtone. Matching rules:

Specific caller ID number. For example, 8321123;

A defined pattern with certain length using x and + to specify, where x
could be any digit from 0 to 9. Samples:
xx+ : at least 2-digit number;
xx : only 2-digit number;
[345]xx: 3-digit number with the leading digit of 3, 4 or 5;
[6-9]xx: 3-digit number with the leading digit from 6 to 9.

Alert Info text
Users could configure the matching rule as certain text (e.g., priority) and
select the custom ring tone mapped to it. The custom ring tone will be
used if the phone receives SIP INVITE with Alert-Info header in the
following format:
Alert-Info: <http://127.0.0.1>; info=priority
Selects the distinctive ring tone for the matching rule. When the incoming
caller ID or Alert Info matches the rule, the phone will ring with the selected
ring.
Defines the timeout (in seconds) for the rings on no answer. The default setting
is 60 seconds.
If set to "Yes", the "From" header in outgoing INVITE messages will be set to
anonymous, essentially blocking the Caller ID to be displayed.
If set to "Yes", anonymous calls will be rejected. The default setting is "No".
If set to "Yes", the phone will automatically turn on the speaker phone to
answer incoming calls after a short reminding beep.
If set to "Yes", the phone will automatically turn on the speaker phone to
answer incoming calls after a short reminding beep, based on the SIP info
header sent from the server/proxy. The default setting is "No".
GXP2124 USER MANUAL Page 48 of 75