Grandstream Networks GXP2124 User Manual page 46

Line Seize Timeout
Eventlist BLF URI
Conference URI
Music On Hold URI
BLF Call-pickup Prefix
PUBLISH for Presence
Special Feature
Account x -> SIP Settings -> Session Timer
Session Expiration
Min-SE
Caller Request Timer
Callee Request Timer
FIRMWARE VERSION 1.0.6.11
synchronized between Broadsoft server and phone. The default setting is
"Disabled".
For Shared Call Appearance, phone must send a SUBSCRIBE-request for the
line-seize event package whenever a user attempts to take the shared line off
hook. "Line Seize Timeout" is the line-seize event expiration timer. The default
value is 15 seconds.
Configures the eventlist BLF URI on the phone to monitor the extensions in the
list with Multi Purpose Key. If the server supports this feature, users need to
configure an eventlist
BLF1006@myserver.com) with a list of extension included. On the phone, in
this "eventlist BLF URI" field, fill in the URI without the domain (i.e., BLF1006).
To monitor the
GUI->Settings->Programmable Keys page, please select "eventlist BLF" in the
key mode, choose account, enter the value of each extension in the list.
Configures the conference URI when using Broadsoft N-way calling feature.
Configures Music On Hold URI to call when a call is on hold. This feature has
to be supported on the server side.
Configures the prefix prepended to the BLF extension when the phone picks
up a call with BLF key. The default setting is **.
Enables presence feature on the phone. The default setting is "No".
Different soft switch vendors have special requirements. Therefore users may
need select special features to meet these requirements. Users can choose
from Standard, Nortel MCS, Broadsoft, CBCOM, RNK, Sylantro or Huawei IMS
depending on the server type. The default setting is "Standard".
The SIP Session Timer extension that enables SIP sessions to be periodically
"refreshed" via a SIP request (UPDATE, or re-INVITE). If there is no refresh
via an UPDATE or re-INVITE message, the session will be terminated once
the session interval expires. Session Expiration is the time (in seconds) where
the session is considered timed out, provided no successful session refresh
transaction occurs beforehand. The default value is 180 seconds.
The minimum session expiration (in seconds). The default value is 90
seconds.
If set to "Yes" and the remote party supports session timers, the phone will use
a session timer when it makes outbound calls.
If set to "Yes" and the remote party supports session timers, the phone will use
a session timer when it receives inbound calls.
GXP2124 USER MANUAL
BLF URI on the
extensions in the
service side first (i.e.,
list, under Web
Page 44 of 75