Notes On Handling - Panasonic AG-CPDIOCRUP Operating Instructions Manual

Notes on handling

Installation
• Install the recorder and camera
properly as described in the
installation manual, so that the
units cannot come loose or fall off.
• Do not place heavy objects on the
power cable and other connection
cables.
• Do not exceed the rating of any
connection cables and other wiring
parts.
• Use only the supplied accessories
and specified optional accessories.
• Keep the recorder, camera, P2
card, power cable and connection
cables away from heat sources.
• Protect the recorder, camera and
P2 cards from oily smoke,
humidity, moisture, and dust.
• Do not touch the power supply
connector with wet hands.
• Do not block the ventilation holes
of the recorder.
Usage
• The recorder is designed to be
powered from a 12-volt source. It
cannot be used in vehicles with a
different electrical source voltage.
(Never connect the recorder to a
24-volt source.)
• When using the recorder for the
first time or after reconnecting it to
the power supply, be sure to set
the date, time, and time zone of
the internal clock using the
Toughbook-Arbitrator Front End
Software.
• Do not place any container with
liquid or any small metal objects
on top of the recorder, camera, or
P2 card.
• Do not insert any foreign objects
into the openings of the unit.
• Do not attempt to modify the
recorder, camera, or P2 card.
• Take care not to damage the
power cable or connection cables.
Do not modify, bend, twist, curl, or
pull these parts or subject them to
a strong stress force. Also avoid
exposure to high temperatures.
• Protect the recorder, camera, and
P2 cards from moisture and do not
expose them to water.
• Do not place heavy objects on the
recorder or camera and do not
step on these parts. Do not
suspend any heavy objects from
the mounted camera.
• Before moving the recorder or
camera, be sure to disconnect the
power cable and other connection
cables.
• Do not handle the recorder or
camera while driving a vehicle.
• Only P2 type memory cards can
be used in the recorder. Do not
use any other type of card,
because this will damage the
recorder.
• When inserting a P2 card, proceed
carefully and do not use excessive
force. Otherwise the P2 card or
the card slot will be damaged.
• Do not insert the P2 card upside
down.
• Do not insert a damaged or
deformed P2 card.
21