Component Access And Replacement; Oven Door; Door Removal - Electrolux EW30GF65G Series Product & Training Manual

COMPONENT ACCESS AND REPLACEMENT

The differing features and designs of the Wave Touch and IQ touch models require different servicing
procedures for some components such as the surface burners, main oven bake burner and lower oven
components. Information for servicing both styles of surface burners and lower oven components is
provided in this manual.
The service procedure for all other components are the same on Wave Touch and IQ Touch models.

OVEN DOOR

All components and parts of the Oven Door assembly can be serviced or replaced. The door is not
available as a complete assembly. Service procedure is identical for Wave Touch and IQ Touch
models.
To service the door begin by removing the door from
Photo A
the range. Open the door fully and pull both hinge
locks down until they stop. (Photo A & B)
Photo B
Gently close the door until it stops against the hinge
Photo C
locks at approximately a 45 degree angle. (Photo C)
Page 24