General Specifications - Pentair MASTERTEMP 200 HD Installation And User Manual

| Technical Data
i
Technical Data

General Specifications

GAS CATEGORY:
GAS TYPES:
GAS SUPPLY PRESSURE:
TYPE OF APPLIANCE:
COUNTRY OF DESTINATION:
READ THE TECHNICAL INSTRUCTIONS BEFORE INSTALLING THIS APPLIANCE.
READ THE INSTALLATION AND USER'S GUIDE BEFORE LIGHTING THIS APPLIANCE.
4
MINIMUM CLEARANCE FROM COMBUSTIBLE
CONSTRUCTED 15 CM REAR, 15 CM TOP.
APPROVED FOR INDOOR AND OUTDOOR INSTALLATIONS ELECTRICAL COMPLIANCE: IN ACCORDANCE
WITH LOCAL ELECTRICAL CODES.
THIS APPLIANCE MUST BE INSTALLED IN ACCORDANCE WITH THE BRITISH STANDARD INSTALLATION
CODES, AND WITH THE REQUIREMENTS OF THE AUTHORITY HAVING JURISDICTION.
™
MASTERTEMP Pool and Spa Heater Installation and User's Guide
II
2H (G20) Natural Gas; 3P (G31) Propane Gas
G20 @ 20 mbar, G31 @ 37mbar
G23
GREAT BRITIAN
WARNING!
MASTERTEMP
DESIGN AND MANFACTURED BY PENTAIR WATER POOL AND SPA, INC.
POOL HEATER
™
THIS HEATER IS EQUIPPED TO BURN
200 HD
INPUT RATE Qn= 53 kW
OUTPUT Pn= kW Pn=
2000 m
ALTITUDE
DO NOT INSTALL THIS HEATER UNDER AN OVERHANG
LESS THAN 1 METER FROM THE TOP. THE AREA UNDER
THE OVERHANG MUST BE OPEN ON THREE (3) SIDES.
REFER TO THE OPERATING INSTRUCTIONS FOR
APPROVED WATER TREATMENT.
Label P/N 475105.A.TAB
TYPE G23
GAS
Model
300 HD 400 HD
Qn =79 kW Qn= 100 kW
kW Pn= kW
2000 m 2000 m
P/N 475106 Rev. A 2/2014