Using Sync With Your Media Player - Ford FIESTA Owner's Manual

• To allow your vehicle to provide
location information, including: GPS
and speed.
• To allow the app to send push
notifications using the vehicle display
and voice capabilities while running in
a background state.
Note: You will only need to grant
permissions the first time you use an app
with SYNC.
Note: We are not responsible or liable for
any damages or loss of privacy relating to
usage of an app, or dissemination of any
vehicle data that you approve us to provide
to an app.
USING SYNC
MEDIA PLAYER
You can access and play music from your
media player through your vehicle's
speaker system using the system's media
menu or voice commands. You can also
sort and play your music by specific
categories, for example artist or albums.
SYNC is capable of hosting nearly any
media player including: iPod, Zune, Plays
from device players, and most USB drives.
SYNC also supports audio formats, for
example MP3, WMA, WAV and ACC.
Voice Command
(USB [stick] | iPod | MP3
[player])
You do not need to say words that appear within square brackets. For example, for where
(USB [stick] | iPOD | MP3 [player]) appears, you can say USB or USB stick.
To Connect Using the System Menu
1. Plug the device into your vehicle's USB
port.
Fiesta (CCN) Vehicles Built From: 12-01-2015 Vehicles Built Up To: 14-10-2015, CG3582en enGBR, Edition date: 12/2014, First Printing
SYNC
WITH YOUR
You can now play music by saying any of the appropriate
voice commands. Refer to the media voice commands.
Confirm that the USB device has been
formatted correctly and has the following
specifications:
• USB 2.0.
• File format must be FAT16/32.
Note: NTFS file format is not supported.
The format of the audio files on the USB
device must be:
• MP3.
• Non DRM protected WMA.
• WAV.
• AAC.
Connecting Your Media Player to
the USB Port
Note: If your media player has a power
switch, make sure you switch on the device.
To Connect Using Voice Commands
1. Plug the device into your vehicle's USB
port.
2. Press the voice button and when
prompted say:
Action and Description
2. Press the Media button (next to the
audio display) until an initializing
message appears in the display.
259