Changing A Bulb - 3-Door - Ford FIESTA Owner's Manual

2. Remove the screws.
3. Disconnect the electrical connector.
4. Remove the headlamp.
Note: When fitting the headlamp, make
sure that you reconnect the electrical
connector correctly.
Note: When fitting the headlamp, make
sure that you fully engage the headlamp in
the retaining clips.
Fiesta (CCN) Vehicles Built From: 12-01-2015 Vehicles Built Up To: 14-10-2015, CG3582en enGBR, Edition date: 12/2014, First Printing
Maintenance

CHANGING A BULB - 3-DOOR

Switch the lamps and the ignition off.
Let the bulb cool down before
removing it.
Note: Only fit bulbs of the correct
specification.
Note: The following instructions describe
how to remove the bulbs. Fit replacements
in the reverse order unless otherwise stated.
Headlamp
Note: Remove the covers to gain access to
the bulbs.
A
B
C
Headlamp Low Beam
1. Remove the headlamp. See
Removing a Headlamp (page 162).
163
WARNINGS
Headlamp low beam
Headlamp high beam and side
lamp
Direction indicator