Table of Contents
Advertisement
4.
RAID configuration utility selection (3-pin RAID_SEL1)
This jumper allows you to select the RAID configuration utility to use when you
create disk arrays. Place the jumper caps to pins 2–3 to use the Intel
Technology.
5.
SFP+12 LED connectors (5-1 pin LAN34_LED1)
These leads are for 10Gb LAN activity LEDs on the front panel. Connect the LAN LED
cable to the backplane for LAN activity indication.
4-6
®
Rapid Storage
Chapter 4: Motherboard information
Advertisement
Table of Contents
