Table of Contents
Advertisement
5.
Close the load plate (A), ensuring that
the front edge of the load plate slides
under the retention lock (B) then push
down the load lever (C).
6.
Insert the load lever under the retention tab to remove the PnP cap from the CPU
socket.
7.
Apply some Thermal Interface Material
to the exposed area of the CPU that the
heatsink will be in contact with, ensuring
that it is evenly spread in a thin layer.
Some heatsink come with pre-applied
Thermal Interface Material. If so, skip
this step.
The Thermal Interface Material is
toxic and inedible. DO NOT eat it. If
it gets into your eyes or touches your
skin, wash it off immediately and seek
professional medical help.
2-6
Load lever
Load lever
Retention
tab
Chapter 2: Hardware setup
Retention
lock
Advertisement
Table of Contents
