3.
Detach the SAS/SATA HDD from the tray and set it aside.
4.
(optional) Remove the screws.
5.
Get the replacement 3.5-inch SAS/SATA HDD.
We strongly recommended that you use the same type and size of HDD. Ensure that the
HDD is compatible with your current RAID setup.
6.
Attach the SAS/SATA HDD into the HDD tray by matching and inserting the four (4)
studs of the tray to the screw holes of the HDD.
Orient the location of the SAS/SATA connectors as shown:
ASUS S1016P
screw holes on the HDD
studs of the HDD tray
2-15