Figure 1: 7210 Sas-T Boot Process - Alcatel-Lucent 7210 SAS-T Installation Manual

Initializing the System and Downloading Software
7210 SAS, please refer to the System Basics Guide. Additionally, you may want to store the
TiMOS image on the internal flash if you want to boot from the flash later.
You will need the following:
•
•
•
•
•
The following sections describe how to boot the device using either of the options listed above.
Port: 24
IP Address: 10.135.4.172/24
Gateway: 10.135.4.1
Prepare the set up as shown in the diagram above. Ensure that the console settings are set as shown
in Console Connection on page
When you are done, power on the 7210 SAS-T.
Using the uplink port to boot 7210 from the network:
Resetting...OK
ø
Alcatel-Lucent 7210 Boot ROM. Copyright 2000-2009 Alcatel-Lucent.
All rights reserved. All use is subject to applicable license agreements.
Running POST tests from ROM
Testing ROM load area...done
Page 60
A FTP server
TiMOS image
A PC with a serial port and Hyperterminal
Cable that connects the console port of 7210 SAS-T to the serial port of PC
A network cable to connect the 7210 unit to the network
SAS-T
Console Cable

Figure 1: 7210 SAS-T Boot Process

70.
7210 SAS-T Installation Guide
FTP
Server
IP Address:
10.10.170.22/24