Camera Setup; Software Information - Kenwood DNX5350BT Instruction Manual

Return to the Top page
Setting Up

Camera Setup

You can set camera parameters.
1
Touch [Menu] on any screen.
2
Touch [SETUP].
SETUP Menu screen appears.
3
Touch [Camera].
Camera SETUP screen appears.
4
Set each item as follows.
R-CAM Interruption
Sets a method for switching the display.
Setting values are ON and OFF.
ON: Switches to the rear view camera video
display when shifting to reverse or
pressing the <AUDIO> (DNX535VBT) /
<TEL> (DNX5350BT, DNX5350DAB) button
for 1 second*.
OFF (Default)
: Switches to the rear view camera video
display when pressing the <AUDIO>
(DNX535VBT) / <TEL> (DNX5350BT,
DNX5350DAB) button for 1 second*.
* [TEL Key Longer than 1 Second] or [AUD
Key Longer than 1 Second] must be set to
User interface (P.84)
"R-CAM". See
92 92

Software Information

Check the software version of this unit.
1
Touch [Menu] on any screen.
2
Touch [SETUP].
SETUP Menu screen appears.
3
Touch [Software].
Software Information screen appears.
4
Confirm the software version. Touch
[Update] as necessary.
NOTE
• For how to update the software, see the relevant
update procedure manual which comes with the
software.