Kenwood DNX570TR Quick Start Manual

Kenwood DNX570TR Quick Start Manual

Kenwood dnx570tr gps navigation system quick start guide
Hide thumbs Also See for DNX570TR:
Table of Contents

Advertisement

Take the time to read through this instruction manual.
Familiarity with installation and operation procedures will help you obtain the best performance
from your new GPS Navigation System.
For your records
Record the serial number, found on the back of the unit, in the spaces designated on the warranty card,
and in the space provided below. Refer to the model and serial numbers whenever you call upon your
Kenwood dealer for information or service on the product.
Model DNX570TR Serial number
US Residence Only
Register your Kenwood product at www.Kenwoodusa.com
© 2013 JVC KENWOOD Corporation
DNX570TR
GPS NAVIGATION SYSTEM

Quick Start Guide

SYSTÈME DE NAVIGATION GPS
Guide de démarrage rapide
SISTEMA DE NAVEGACIÓN GPS
Guía de inicio rápido
Register Online
B59-2811-00/01 (K)

Advertisement

Table of Contents
loading

Summary of Contents for Kenwood DNX570TR

  • Page 1: Quick Start Guide

    Record the serial number, found on the back of the unit, in the spaces designated on the warranty card, and in the space provided below. Refer to the model and serial numbers whenever you call upon your Kenwood dealer for information or service on the product. Model DNX570TR Serial number...
  • Page 2: Table Of Contents

    You can How to Use download the latest version of the the Navigation System Instruction Manual from http:// Other Features _____________________ 13 manual.kenwood.com/edition/ im366/. How to Play Music How to Play Movie/Picture NOTE How to Listen to the Radio/ • The panels shown in this guide are...
  • Page 3: Precautions

    Precautions on using this unit Precautions on handling discs • When you purchase optional accessories, check with your Kenwood dealer to make sure that • Do not touch the recording surface of the disc. they work with your model and in your area.
  • Page 4: Cleaning The Unit

    Quick Start Guide Acquiring GPS signal How to Reset Your Unit The first time you turn on this unit, you must If the unit or the connected unit fails wait while the system acquires satellite signals to operate properly, reset the unit. for the first time.
  • Page 5: Safety Precautions And Important Information

    Kenwood Car Navigation System and follow the instructions in this manual. Neither Failure to avoid the following potentially Kenwood nor Garmin shall be liable for problems hazardous situations may result in injury or or accidents resulting from failure to observe the property damage.
  • Page 6: First Step

    (Instruction Manual P.100) After setting, touch [ Camera Set the parameters for the camera. (Instruction Manual P.104) After setting, touch [ OEM SETUP (North America Sales area only) This function requires a commercial adaptor. Consult your Kenwood dealer for details.
  • Page 7 DNX570TR Touch [Finish]. NOTE • For details on operations of each setting, refer to the Instruction Manual.
  • Page 8: Basic Operations

    Quick Start Guide asic Operations Functions of the Buttons on the Front Panel How to insert a microSD Card 1) Open the microSD card slot cover as the illustration in the right. 2) Hold the microSD card with the label facing up and the notched section right, and insert it into the slot until it clicks.
  • Page 9 DNX570TR Number Name Motion Disc insert A slot to insert a disc media. slot 0 (Eject) • Ejects the disc. • Pressing for 1 second ejects the disc forcibly. fi (Reset) • If the unit or the connected unit fails to operate properly, the unit returns to factory settings when this button is pressed (Instruction Manual P.127).
  • Page 10: Common Operations

    Quick Start Guide Common Operations General There are some functions which can [Menu] be operated from most screens. Returns to the Top Menu screen. Touching for at least 1 second displays the Screen Control screen. (Even when an image is dispalyed, touching for at least 1 second displays the Screen Control screen.) (RETURN) Returns to previous screen.
  • Page 11 • You can get additional information about using the navigation system from Help. To display Help, touch [Apps] and then touch [Help]. • For more information about your navigation system, download the latest version of the Owner’s Manual from manual.kenwood.com/edition/im366. Enter your destination and start the guidance. ● Finding points of interest NOTE 1) Touch [Where To?].
  • Page 12 Garmin and JVC KENWOOD will not be responsible for any traffic fines or citations that you may receive for failing to follow all applicable traffic laws and signs.
  • Page 13: Other Features

    NOTICE • Traffic service is not available in some areas or countries. • Garmin and JVC KENWOOD are not responsible for the accuracy or timeliness of the traffic information. With an FM traffic receiver, the navigation system can receive and use traffic information.
  • Page 14: How To Play Music

    Quick Start Guide ow to Play Music You can play audio files from music CD, disc media, USB storage device and iPod. NOTE • For details on playable file format, media format, iPod model, etc., refer to the Instruction Manual. Connect the media you want to play as shown below. Disc 1) Insert the disc into the slot.
  • Page 15: Search The Track/File You Want To Listen To

    DNX570TR Control the music you are listening to on the source control screen. The following symbols indicate the keys on the screen. The functions of the keys are the same despite the difference of the source you are listening to.
  • Page 16: How To Play Movie/Picture

    Quick Start Guide ow to Play Movie/Picture You can play DVD video, Video CD (VCD), movie files from disc media, iPod and picture files from USB storage device. NOTE • For details on playable file format, device format, etc., refer to the Instruction Manual. Connect the media you want to play.
  • Page 17: How To Listen To The Radio/Hd Radio™ Tuner/ Siriusxm

    DNX570TR ow to Listen to the Radio/ HD Radio™ Tuner/ SiriusXM® Touch [Menu] on any screen. Top Menu screen appears. Touch [TUNER], [HD Radio], or [SIRIUS XM]. The unit switches to the radio/ HD Radio tuner / SIRIUS XM source.
  • Page 18: How To Make A Phone Call

    Quick Start Guide ow to Make a Phone Call You can use your Bluetooth cell-phone when paired to this unit. Register your cell-phone to the unit. Follow as the procedures shown below. For detailed operation, see Registering the Bluetooth Unit (P.83) in the Instruction Manual. 1) Touch [Menu] on any screen.
  • Page 19: Make Or Receive A Phone Call

    DNX570TR Make or receive a phone call. See the table below for each operation method. Call by entering a phone number 1 Enter a phone number with number keys. 2 Touch [ Call using call records 1 Touch [ ] (incoming calls), [ ] (missed calls), or [ ] (outgoing calls).
  • Page 20: Installation Procedure

    Quick Start Guide • If the fuse blows, first make sure the wires aren’t nstallation Procedure touching to cause a short circuit, then replace the old fuse with one with the same rating. • Insulate unconnected wires with vinyl tape or other similar material. To prevent a short circuit, Before Installation do not remove the caps on the ends of the unconnected wires or the terminals.
  • Page 21 DNX570TR Unit Installation Procedure 1 To prevent a short circuit, remove Supplied accessories the key from the ignition and disconnect the terminal of the First of all, make sure that all battery. accessories are supplied with the 2 Make the proper input and unit.
  • Page 22: Gps Antenna

    Quick Start Guide GPS antenna ● Toyota, Nissan or Mitsubishi car 4 (M5x6mm) or GPS antenna is installed inside of 5 (M5x7mm) the car. It should be installed as Car Bracket horizontally as possible to allow easy reception of the GPS satellite signals. To mount the GPS antenna inside your vehicle: 4 (M5x6mm) or...
  • Page 23 DNX570TR Microphone unit 1) Check the installation position of the microphone (accessory 9). 2) Clean the installation surface. 3) Install the microphone. 4) Wire the microphone cable up to the unit with it secured at several positions using tape or other desired method.
  • Page 24: Removing Procedure

    Quick Start Guide Removing the unit Removing Procedure 1) Remove the trim plate by Removing the trim plate referring to step 1 in “Removing the trim plate”. 1) Engage the catch pins on the 2) Insert the two extraction keys extraction key (accessory3) and (accessory3) deeply into the slots remove the two locks on the...
  • Page 25: Connection

    DNX570TR Connection System connection Accessory 9 Accessory 7 AV Audio output Connect to the vehicle’s parking Accessory 2 brake detection switch harness. Light Green (Parking sensor wire) PRK SW For best safety, be sure to connect the parking sensor. Purple/White (Reverse sensor wire) Connect to vehicle’s...
  • Page 26: Connecting Wires To Terminals

    Quick Start Guide Connecting wires to terminals Fuse (10A) Ignition key switch Accessory 1 Red (Ignition wire) White/Black To front Yellow (Battery wire) left speaker White Car fuse box Car fuse Black (Ground wire) (Main fuse) (To car chassis) Gray/Black To front right speaker...
  • Page 27: Optional Accessory Connection

    DNX570TR Optional accessory connection SiriusXM Connect Vehicle Tuner connector iDatalink connector USB maximum power supply current USB terminal : DC 5 V (0.8 m) iPod (commercially available) USB device (commercially available) KCA-iP202 (Optional Accessory) USB terminal (0.8m) AV Output (1.8m)
  • Page 28: About This Unit

    Incorporated in the United States and/or other the Bluetooth SIG, Inc. and any use of such marks by countries. JVC KENWOOD Corporation is under license. Other • ABOUT DIVX VIDEO: DivX® is a digital video trademarks and trade names are those of their format created by DivX, LLC, a subsidiary of Rovi respective owners.
  • Page 29 • For issues using the Pandora® application, please Apple • Search for “iHeart Link for KENWOOD” in the contact Pandora at pandora-support@pandora. iTunes App Store to find and install the most current version of the iHeart Link application on your device.
  • Page 30 In compliance with Federal Regulations, following are reproductions of labels on, or inside the product relating to laser product safety. • C ontains Transmitter Module JVC KENWOOD Corporation FCC ID : XQN-BTR60X 2967-3, ISHIKAWA-MACHI, • C ontains Transmitter Module HACHIOJI-SHI, TOKYO, JAPAN IC: 9688A-BTR601...
  • Page 32 Record the serial number, found on the back of the unit, in the spaces designated on the warranty card, and in the space provided below. Refer to the model and serial numbers whenever you call upon your Kenwood dealer for information or service on the product.
  • Page 33 What Do You Want To Do? Thank you for purchasing the KENWOOD GPS NAVIGATION SYSTEM. In this manual, you will learn various convenient functions of the system. Click the icon of the media you want to play. With one-click, you can jump to the section of each media!
  • Page 34: Ipod Operation

    ontents Before Use Radio and HD Radio™ Tuner Operation 2 WARNING _______________________ 4 Radio/HD Radio™ Tuner Basic Operation How to Read this Manual Memory Operation __________________ 61 Basic Operations Selecting Operation _________________ 62 Functions of the Buttons Traffic Information __________________ 64 on the Front Panel _________________ 6 Receive Mode _____________________ 64 Turning on the Unit _________________ 10...
  • Page 35 Controlling Audio Setting Audio ______________________ 108 Controlling General Audio ____________ 112 Equalizer Control ___________________ 113 Zone Control _______________________ 115 Sound Effect ______________________ 116 Listening Position __________________ 118 Remote control Battery Installation __________________ 120 Functions of the Remote control Buttons 121 Troubleshooting Problems and Solutions ______________ 124 Error Messages _____________________ 125...
  • Page 36: Before Use

    Called lens fogging, this condensation on the lens may not allow discs to play. In such • To prevent a short circuit, never put or a situation, remove the disc and wait for the leave any metallic objects (such as coins or condensation to evaporate. If the unit still metal tools) inside the unit. does not operate normally after a while, • Do not watch or fix your eyes on the unit’s consult your Kenwood dealer. display when you are driving for any extended period. Precautions on handling discs • If you experience problems during • Do not touch the recording surface of the installation, consult your Kenwood dealer. disc. Precautions on using this unit • Do not stick tape etc. on the disc, or use a disc with tape stuck on it. • When you purchase optional accessories, • Do not use disc type accessories.
  • Page 37: How To Read This Manual

    Return to the Top page How To Read This Manual ow to Read this Manual Link header You can refer each section or top page Return to the Top page CD, Disc, iPod, USB device with one-click. Operation title Search Operation Introduces the function.
  • Page 38: Basic Operations

    Return to the Top page Basic Operations asic Operations unctions of the Buttons on the Front Panel DNX890HD/DNX7700BT 7 8 9 NOTE • The panels shown in this guide are examples used to provide clear explanations of the operations. For this reason, they may be different from the actual panels.
  • Page 39 Return to the Top page Basic Operations Number Name Motion fi (Reset) • If the unit or the connected unit fails to operate properly, the unit returns to factory settings when this button is pressed (P.127). • Switches attenuation of the volume on/off. • North America Sales area: Pressing for 1 second stores the tag data of the current music from HD Radio broadcast or SiriusXM (P.65,...
  • Page 40 • In this manual, each model name is abbreviated as follows. DNX690HD: DNX570HD, DNX570TR, DNX5080EX, and DNX5700BT: If above icons are showed, read the article applicable to the unit you use. How to insert a microSD Card...
  • Page 41 Return to the Top page Basic Operations Number Name Motion Disc insert A slot to insert a disc media. slot 0 (Eject) • Ejects the disc. • Pressing for 1 second ejects the disc forcibly. fi (Reset) • If the unit or the connected unit fails to operate properly, the unit returns to factory settings when this button is pressed (P.127).
  • Page 42: Turning On The Unit

    Return to the Top page Basic Operations urning on the Unit The method of turning on is different depending on the model. Press the <MENU> button. The unit is turned on. ● To turn off the unit: ● Press the <MENU> button for 1 second. Press the <MENU> button. The unit is turned on. ● To turn off the unit: ● Press the <MENU> button for 1 second. If it is your first time turning the unit on after installation, it will be necessary to perform Initial setup (P.11).
  • Page 43: Initial Setup

    (DNX570HD, DNX5080EX, DNX5700BT) Set the terminal which your iPod is connected to. Default is “iPod”. 1 Touch [iPod] or [AV-IN2]. AV-IN SETUP (DNX570TR) Select the source connected to AV-IN. 1 Touch [SET]. 2 For AV-IN Interface, touch [Rear Camera] or [AV-IN] to select the source.
  • Page 44 Camera Setup (P.104). For detailed operation, see OEM SETUP (North America Sales area only) This function requires a commercial adaptor. Consult your Kenwood dealer for details. Touch [Finish]. NOTE Setting Up (P.94). • These settings can be set from the SETUP menu. See...
  • Page 45: How To Play Media

    Return to the Top page Basic Operations ● To eject the disc: ● ow to Play Media Press the <0> button. Music CD and disc media Press the <0> button. USB device Connect the USB device with the USB cable. The panel opens. Insert the disc into the slot. The unit reads the device and playback starts.
  • Page 46: Operating With The Top Menu Screen

    Return to the Top page Basic Operations perating with the Top Menu Screen Most functions can be performed from the Top Menu screen. Touch [Menu] on any screen. NOTE • If [Menu] is not displayed during video/picture playback, press the <MENU> button. (P.6, P.8) Top Menu screen appears. NOTE • You can select the hiding icon by scrolling the screen left or right.
  • Page 47 Return to the Top page Basic Operations ● Customizing Top Menu screen ● Drag the icon you want to register to the upper line. You can move up to three icons.
  • Page 48: Common Operations

    Return to the Top page Basic Operations ommon Operations Introduces the common operations. General There are some functions which can be operated from most screens. [Menu] Returns to the Top Menu screen. Touching for at least 1 second displays the Screen Control screen. (Even when an image is dispalyed, touching for at least 1 second displays the Screen Control screen.) (RETURN) Returns to previous screen.
  • Page 49 Return to the Top page Basic Operations Flick scrolling You can scroll the list screen by flicking the screen up/down or right/left.
  • Page 50: Navigation Operation

    Return to the Top page Basic Operations avigation Operation For details on the navigation function, please refer to the Navigation Instruction Manual. Display the navigation screen Press the <NAV> button. The navigation screen appears. Control audio from the navigation screen You can control audio sources while the navigation screen is displayed. Also, you can view the navigation information while the source control screen is displayed. Touch the information bar. The navigation screen with audio information appears.
  • Page 51 Return to the Top page Basic Operations Touch [ ] or [ ] in the navigation screen. Touching this area displays the audio screen. : D isplays the navigation and control : D isplays the navigation and current keys of the current source. video/picture playback display. NOTE • The screen switches between playback screen and camera view each time the viewing area is touched.
  • Page 52: Oem Features Operation

    Return to the Top page Basic Operations EM Features Operation By connecting this unit to the bus system of the vehicle using an iDataLink (commercially available), this unit can access the satellite radio source provided for the vehicle and vehicle information can be displayed on this unit. Touch [Menu] on any screen. Top Menu screen appears. Touch [OEM Features] in the Top Menu screen. OEM Features screen appears. : D isplays the control screen of the : D isplays the control screen of the media player source provided for the satellite radio source provided for the vehicle. vehicle. : D isplays the control screen of the : D isplays the control screen of the Bluetooth Hands Free function Bluetooth streaming source provided...
  • Page 53 Return to the Top page Basic Operations : D isplays information about the air : D isplays information about the conditioner of the vehicle. instruments such as a speedometer. : D isplays information about the tire : D isplays information about the pressures of the vehicle. Parking Distance Sensor of the vehicle. NOTE • Displayable screens, button names, and screen names vary depending on the type of the connected iDataLink and the model of the vehicle.
  • Page 54: Dvd/Video Cd (Vcd) Operation

    Return to the Top page DVD, VCD VD/Video CD (VCD) Operation DVD/VCD Basic Operation Most functions can be controlled from the source control screen and playback screen. NOTE • Set the remote control mode switch to DVD mode before starting operation, see Switching the operation mode (P.121). • The screen shot below is for DVD. It may be different from the one for VCD. Control screen Video screen 1 Information display...
  • Page 55 Return to the Top page DVD, VCD 5 Sub function menu The following functions can be performed by using keys in this area. • Repeats the current content: Touch [ ]. Each time you touch the key, repeat mode switches in the following sequence;...
  • Page 56 Return to the Top page DVD, VCD Multi function menu The functions of each key are as follows. [4] [¢] Searches the previous/next content. [38] Plays or pauses. ] or [ ] (DVD only) Plays in slow motion forward or backward. Stops playback. When touched twice, the disc is played from the beginning when you play it the next time.
  • Page 57: Dvd Disc Menu Operation

    Return to the Top page DVD, VCD Highlight control DVD Disc Menu Operation Highlight control lets you control the DVD You can set up some items in the DVD-VIDEO menu by touching the menu key directly on disc menu. the screen. Touch illustrated area during playback. Touch [Highlight] in the Menu Control screen. Touch desired item on the screen. Menu Control screen appears. Perform desired operation as follows.
  • Page 58: Zoom Control For Dvd And Vcd

    Return to the Top page DVD, VCD DVD play mode setting Zoom Control For DVD And VCD You can select DVD play mode. You can enlarge Playback screen for DVD and VCD. Touch [Next] in the Menu Control screen. For VCD, touch illustrated area during playback. Menu Control 2 screen appears. Zoom Control screen appears. Touch the key which corresponds to desired setting item.
  • Page 59 Return to the Top page DVD, VCD * T his function may not be performed depending on the disc. NOTE • You cannot touch the menu keys directly on the screen when zooming.
  • Page 60: Dvd Setup

    Return to the Top page DVD, VCD Menu/Subtitle/Audio Language* DVD Setup Language setup (P.29). You can set up the DVD playback functions. Dynamic Range Control* Sets the dynamic range. NOTE Wide: The dynamic range is wide. • Each operation in this section can be started from Normal: The dynamic range is normal. the Top Menu screen.
  • Page 61: Language Setup

    Return to the Top page DVD, VCD Language setup Parental level This setting is for the language used in the Sets a parental level. You cannot setup this menu, subtitle, and voice. You cannot setup item during DVD playback. these items during DVD playback. Touch [SET] of [Parental Level]. Touch [SET] of the desired item; Parental Pass screen appears. [Menu Language], [Subtitle Language], Enter the parental code and touch [Audio Language].
  • Page 62: Disc Setup

    Return to the Top page DVD, VCD Disc setup Performs setup when using disc media. Touch [SET] of [DISC SETUP]. DISC SETUP screen appears. Select an option as follows. CD Read Sets the motion of this unit when a music CD is played. 1 (Default): Automatically recognizes and plays back an audio file disc, a DVD or a music CD.
  • Page 63 Return to the Top page DVD, VCD...
  • Page 64: Cd/Audio And Visual Files/ Ipod Operation

    Return to the Top page CD, Disc, iPod, USB device D/Audio and Visual Files/iPod Operation Music/Video/Picture Basic Operation Most functions can be controlled from the source control screen and playback screen. NOTE • Set the remote controller mode switch to AUD mode before starting operation, see Switching the operation mode (P.121). • To connect iPod to this unit, optional accessory KCA-iP202 or KCA-iP102 is necessary. When iPod is connected using the KCA-iP202, you can listen to audio and watch video.
  • Page 65 Return to the Top page CD, Disc, iPod, USB device 3 Multi function key Multi function menu (P.36). Touch to switch the multi function menu. For details on the menu, see 4 Multi function menu Various functions can be performed by using keys in this area. For details on the menu, see Multi function menu (P.36).
  • Page 66 Return to the Top page CD, Disc, iPod, USB device USB device and iPod NOTE • The screen shot below is for USB device. It may be different from the one for iPod. Simple Control screen List Control screen 1 Information display Displays the following information.
  • Page 67 Return to the Top page CD, Disc, iPod, USB device Picture/video screen 9 Searching file area (picture/video file only) • Touch to search the next/previous file. • During slide show in USB mode, touching each area searches the next/previous music file. • Scrolling from center of display to left or right performs fast backward or fast forward. To stop fast backward/forward, touch center of the display.
  • Page 68 Return to the Top page CD, Disc, iPod, USB device Multi function menu Music CD Disc media iPod USB device The following functions can be performed by using keys in this area. ] (Disc media, iPod, USB device only) Searches track/file. For details on search operation, see Search Operation (P.38). [4] [¢] Searches the previous/next track/file.
  • Page 69 Return to the Top page CD, Disc, iPod, USB device Sub function menu Music CD Disc media iPod USB device The following functions can be performed by using keys in this area. Repeats the current track/folder. Each time you touch the key, repeat mode switches in the following sequence; CD, iPod: "track repeat" , "repeat off"...
  • Page 70: Search Operation

    Return to the Top page CD, Disc, iPod, USB device Other search Search Operation When you want to narrow the list down, You can search music, video or picture files there are other search ways. by the following operations. This function is not available when music CD is the current source. NOTE • If you use a remote control, you can jump directly Touch [ ] in the control screen. to the desired track/file with entering the track/ The search type screen appears.
  • Page 71 Return to the Top page CD, Disc, iPod, USB device Category search (USB device and iPod only) Link search (USB device and iPod only) Touch the desired category from the Touch the desired item from the left left part of the screen. part of the screen.
  • Page 72 Return to the Top page CD, Disc, iPod, USB device Folder search (USB device and disc Picture search (USB device only) media only) Touch the desired picture. Touch the desired folder. The selected picture appears in full screen. Contents of the folder are displayed in the See number 9-10 in USB device and iPod right area of the screen.
  • Page 73 Return to the Top page CD, Disc, iPod, USB device Touch [ 3 ] on the selected artwork. Search from album artwork The first song in the album is played. (USB device and iPod only) In addition, you can create your original You can search music files by selecting the playlist from this screen.
  • Page 74 Return to the Top page CD, Disc, iPod, USB device Favorite list Touch the desired artwork in the favorite list. You can create an original playlist of your favorite 10 albums by selecting album artworks. Touch and drag the desired album artwork in the lower line to the upper line. Selected album is played and the control screen appears.
  • Page 75: Movie Control

    Return to the Top page CD, Disc, iPod, USB device Movie Control You can adjust the movie playback from a disc media. In the playback screen, touch illustrated area. Movie Control screen appears. Perform desired operation as follows. Changes subtitle language Touch [Subtitle]. Changes audio language Touch [Audio]. Exits the menu Touch [Exit].
  • Page 76: Pandora® Internet Radio Operation

    Return to the Top page CD, Disc, iPod, USB device PANDORA® Internet Radio Operation You can listen to the PANDORA® internet radio on this unit by controlling the application installed in the iPhone or Bluetooth device. To enter PANDORA mode, touch [Pandora] icon in the Top Menu screen. NOTE • Install the latest version of the Pandora® application on your iPhone, Android or BlackBerry. iPhone: Search for "PANDORA" in the Apple App Store to find and install the most current version. Android: Visit the Google play and search for Pandora to install.
  • Page 77 Return to the Top page CD, Disc, iPod, USB device Multi function menu Sub function menu The following functions can be performed by The following functions can be performed by using keys in this area. using keys in this area. Status bar in center Searches for a station. For details on searching, Displays the elapsed time since when you Station list screen (P.46).
  • Page 78 Return to the Top page CD, Disc, iPod, USB device Device select Station list screen You can display a Device select screen for You can perform the following functions device selection. from this screen. Touch [ ] in the control screen. The Device select screen appears. Selects the station Touch the station name in the list. Sort the list in alphabetical order Device selection You can select the desired letter from the list...
  • Page 79 Return to the Top page CD, Disc, iPod, USB device Genre list screen You can perform the following functions from this screen. The selected genre is created as a new station.
  • Page 80: Aha Operation

    Return to the Top page CD, Disc, iPod, USB device Aha Operation You can listen to the Aha on this unit by controlling the application installed in the iPhone or Android. To enter Aha mode, touch [aha] icon in the Top Menu screen. NOTE • Install the latest version of the Aha application on your iPhone or Android. (P.139) iPhone: Search for "Aha" in the Apple App Store to find and install the most current version. Android: Search for "Aha"...
  • Page 81 Return to the Top page CD, Disc, iPod, USB device Multi function menu Sub function menu The following functions can be performed by The following functions can be performed by using keys in this area. using keys in this area. Searches for a station. For details on searching, Sets the content backward 15 seconds. Station list screen (P.50). [4] [¢] Sets the content forward 30 seconds.
  • Page 82 Return to the Top page CD, Disc, iPod, USB device Device select Station list screen You can display a Device select screen for You can perform the following functions device selection. from this screen. Touch [ ] in the control screen. The Device select screen appears. Selects the station Touch the station name in the list. Device selection NOTE Bluetooth: Uses the Android smartphone...
  • Page 83 Return to the Top page CD, Disc, iPod, USB device Navigate Sets the location information received from Aha at the destination of navigation. Touch [ ] in the control screen. Saves the location information. [Go!] Sets the location information at the destination and starts navigation.
  • Page 84: Iheartradio Operation

    Return to the Top page CD, Disc, iPod, USB device iHeartRadio Operation You can listen to the iHeartRadio on this unit by controlling the application installed in the iPhone or Android. To enter iHeartRadio mode, touch [iHeartRadio] icon in the Top Menu screen. NOTE • Install the latest version of the iHeartRadio application "iHeartAuto" on your iPhone or Android. iPhone: Search for "iHeartAuto" in the Apple App Store to find and install the most current version. Android: Search for "iHeartAuto"...
  • Page 85 Return to the Top page CD, Disc, iPod, USB device Multi function menu Station search You can list and select station. Touch [ ] in the control screen. The following functions can be performed by using keys in this area. The Station Search screen appears. [ 37 ] Stops or pauses. (Live station only) [ 38 ] Plays or pauses.
  • Page 86 Return to the Top page CD, Disc, iPod, USB device Discovery tuner My stations edit Touch [ ] in the Station Search You can set the variety level in a custom screen. station. Station Edit screen appears. Touch [ ] in the control screen. Select the station to delete from My The Discovery tuner select screen appears.
  • Page 87 Device select iTunes tagging You can display a Device select screen for You can tag your music using an iTunes device selection. Tagging enabled iHeartRadio. When you hear a song you enjoy on your Touch [ ] in the control screen. local iHeartRadio, you only have to press The Device select screen appears. the <ATT> button (DNX890HD) or Volume knob (DNX690HD/ DNX570HD/ DNX570TR/ DNX5080EX) for 1 second. The song’s information will then be saved on this unit. The saved songs will then show up in a playlist called “Tagged” in iTunes the very next time you sync your iPod to your computer. So then you just need to click and then easily buy and download the song you were tagging directly from the Apple iTunes Music Store. Device selection Press the button instructed in each...
  • Page 88: Usb/Ipod/Divx Setup

    Return to the Top page CD, Disc, iPod, USB device USB setup USB/iPod/DivX Setup You can perform setup when using USB/ Set each item as follows. iPod/ DivX (DNX890HD/ DNX7700BT/ DNX5700BT). NOTE • Each operation in this section can be started from the Top Menu screen. For details, see Operating with the Top Menu Screen (P.14).
  • Page 89: Ipod Setup

    Return to the Top page CD, Disc, iPod, USB device iPod setup DivX(R) VOD (DNX890HD/ DNX7700BT/ DNX5700BT) Set each item as follows. This feature is available only for Central and South America sales area. Set each item as follows. AudioBook Speed Sets the audio book playback speed. Select from [Slow], [Normal] (default), and [Fast]. DivX(R) Registration Code Wide Screen* Checks the registration code.
  • Page 90: Radio And Hd Radio™ Tuner Operation

    • Set the remote control mode switch to AUD mode before starting operation, see Switching the operation mode (P.121). • HD Radio broadcasting can be received only by the DNX890HD, DNX690HD, DNX570HD, DNX570TR, and DNX5080EX. • HD Radio broadcasting is for North American sales area only.
  • Page 91 Return to the Top page Radio and HD Radio 6 Preset list Displays the list of preset stations or channels and the information. 7 Sub function menu The following functions can be performed by using keys in this area. • Switches the band: Touch [AM] or [FM]. • Tunes in a station: Touch [1] [¡].
  • Page 92 Return to the Top page Radio and HD Radio SETUP] Touch to display the SETUP Menu screen. See Setting Up (P.94). AUDIO] Touch to display the Audio Control screen. See Controlling Audio (P.138). EXT SW] Touch to control the external device power supply. For details, see External Device Control (P.107).
  • Page 93: Memory Operation

    Return to the Top page Radio and HD Radio Manual memory Memory Operation You can store the current receiving station or Auto memory channel in memory. Select a station or channel you wish to You can store stations with good reception in store in memory. memory automatically. Touch [P#] (#:1-6) in which you want NOTE to store the station or channel for 2 • Auto memory terminates when 6 stations are seconds until a beep sounds.
  • Page 94: Selecting Operation

    Return to the Top page Radio and HD Radio Search by program type Selecting Operation (FM tuner and HD Radio tuner only) Preset select You can tune to a station with a specific You can list and select memorized station or program type when listening to FM. channel. Touch [ ] in the control screen. Selecting from the multi function menu The multi function menu appears.
  • Page 95: Direct Search

    Return to the Top page Radio and HD Radio Direct search Category/Channel search You can tune in by entering the desired You can specify the desired category and frequency or channel number. select a channel. Touch illustrated area. Touch [ ] in the control screen. The multi function menu appears. Touch [ ] in the multi function menu. List select screen appears.
  • Page 96: Traffic Information

    Return to the Top page Radio and HD Radio Traffic Information Receive Mode (HD Radio tuner (HD Radio tuner only) only) You can set the radio broadcasts receive You can listen and watch the traffic mode. information automatically when a traffic bulletin starts. Touch [ ] in the control screen. However, this feature requires a Radio The multi function menu appears. Broadcast Data System that includes the TI Touch [RCV] in the multi function menu.
  • Page 97: Itunes Tagging

    Return to the Top page Radio and HD Radio Checking the memory usage iTunes Tagging (HD Radio tuner only) Touch illustrated area. You can tag your music using an iTunes Tagging enabled HD Radio tuner. When you hear a song you enjoy on your local HD Radio tuner, you only have to press the <ATT> button (DNX890HD) or Volume knob (DNX690HD/ DNX570HD/ DNX570TR/ DNX5080EX) for 1 second. The song’s information will then be saved on this unit. The saved songs will then show up in a playlist called “Tagged” in iTunes the very next time you sync your iPod to your List control screen appears. computer. So then you just need to click and then easily buy and download the song you Touch [ were tagging directly from the Apple iTunes Information list appears.
  • Page 98: Bookmark

    Return to the Top page Radio and HD Radio Bookmark list Bookmark (HD Radio tuner only) Displaying a list of registered bookmarks and detailed information and QR code of the song. Stores tag information (title, artist, album, URL, and description) about the song you are Touch [ ] in the control screen. listening to now. The multi function menu appears. Detailed information and QR codes can Touch [ ] in the multi function menu. be displayed according to the stored tag information.
  • Page 99 Return to the Top page Radio and HD Radio Bookmark delete Touch [ Deletes all the selected bookmark(s) Deleting a bookmark. Touch [ ] in the control screen. The multi function menu appears. Touch [ ] in the multi function menu. List select screen appears. Touch [Bookmark].
  • Page 100: Siriusxm® Operation

    Return to the Top page SiriusXM iriusXM® Operation SiriusXM® Basic Operation Most functions can be controlled from the source control screen. Before use • SiriusXM Satellite Radio operation requires the connection of the optional SiriusXM-Connect Vehicle Tuner and service. To activate the SiriusXM Vehicle Connect tuner, you will need the Radio ID. • Make a note of your Radio ID: For each SiriusXM Vehicle Connect tuner, peculiar Radio ID is assigned.
  • Page 101 Return to the Top page SiriusXM 4 Preset key/Multi function menu Recalls the memorized channel. When touched for 2 seconds, store the current receiving channel in memory. When switched, various functions can be performed by using keys in this area. For details on the menu, see Multi function menu (P.69).
  • Page 102 Return to the Top page SiriusXM Touch for 2 seconds to register content as Alert content. • [ ]: Registers the artist of the song you are listening to now as an alert content. • [ ]: Registers the song you are listening to now as an alert content. For details, see Song, Artist and Game Alerts (P.74).
  • Page 103: Selecting Operation

    Return to the Top page SiriusXM Direct search Selecting Operation You can tune in by entering the desired Preset select frequency or channel number. Touch illustrated area. You can list and select memorized station or channel. Selecting from the multi function menu Touch the desired number from P1 to The unit will tune to the selected station or channel.
  • Page 104 Return to the Top page SiriusXM Category/Channel search Smart Favorites, Tune Start™ You can specify the desired category and Current 6 preset channels are recognized as select a channel. Smart Favorites. SiriusXM Vehicle Tuner automatically Touch [ ] in the control screen. buffered their broadcasting content of the The multi function menu appears. Smart Favorites in the background. When you select a Smart Favorites, you can Touch [ ] in the multi function menu. rewind and replay up to 30 minutes of any List select screen appears.
  • Page 105: Itunes Tagging

    Return to the Top page SiriusXM Checking the memory usage iTunes Tagging You can tag your music using an iTunes Touch illustrated area. Tagging enabled SiriusXM receiver. When you hear a song you enjoy on your local SiriusXM, you only have to press the <ATT> button (DNX890HD) or Volume knob (DNX690HD/ DNX570HD/ DNX570TR/ DNX5080EX) for 1 second. The song’s information will then be saved on this unit. The saved songs will then show up in a playlist called “Tagged” in iTunes the very next time you sync your iPod to your computer. So then you just need to click and List control screen appears. then easily buy and download the song you were tagging directly from the Apple iTunes Touch [ Music Store. Information list appears. Scroll down the list and confirm Registering a tag “Tagging Information”...
  • Page 106: Song, Artist And Game Alerts

    Return to the Top page SiriusXM Song, Artist and Game Alerts SiriusXM Replay™ When a broadcast program related to the You can replay last 60 minutes of current registered artist, song or team starts, a channel. message appears to allow you to switch the Touch [SIRIUS XM] in the Top Menu. current channel to the relevant channel. When the broadcast of the registered content starts, an Alert screen appears. [4] [¢] Searches the previous/next track.
  • Page 107: Siriusxm Setup

    Return to the Top page SiriusXM Program list SiriusXM Setup Touching this plays back the displayed program. NOTE [Info Change] • Each operation in this section can be started from Touching this allows you to switch among the the Top Menu screen. For details, see Operating Artist name, Song title, Category name, and with the Top Menu Screen...
  • Page 108 Return to the Top page SiriusXM Parental code Parental lock You can set a SiriusXM parental code. You can select the channels to enable SiriusXM Parental Lock function. Touch [Change] of [Parental Code] in the SIRIUS XM SETUP screen. Touch [SET] of [Parental Lock Channel Select] in the SIRIUS XM SETUP screen. Parental Pass Check screen appears. Parental Pass Check screen appears.
  • Page 109 Return to the Top page SiriusXM Mature setup Touch each channel list and set on or off. You can automatically limit children’s contact with the channel for which Parental Lock is not turned on when the channel is deemed inappropriate. Touch [ON] or [OFF] of [Parental Lock Mature] in the SIRIUS XM SETUP screen. Turns the Mature on or off. Default is “OFF”.
  • Page 110 Return to the Top page SiriusXM Skip channel select Content alerts setup You can set the undesired channels to skip. You can turn on or off the Content alerts function. Touch [SET] of [Skip Channel Select]. Touch [ON] or [OFF] of [Content alerts] Skip Category Select screen appears. in the SIRIUS XM SETUP screen. Touch the desired category from the Turns the Content alerts on or off.
  • Page 111 Return to the Top page SiriusXM Content alerts Content Set City select for Content alerts You can set a content for Content alerts. You can select a city for which traffic information or weather forecast is to be Touch [SET] of [Content alerts Content received with the Content alerts function. Set] in the SIRIUS XM SETUP screen. Touch [2] and [3] of [Traffic Weather Artist list screen appears. Jump City Select] to select a city.
  • Page 112 Return to the Top page SiriusXM Tune start™ setup Touch [ON] or [OFF] of [Tune Start] in the SIRIUS XM SETUP screen. Turns the Tune start on or off. Default is “ON”.
  • Page 113 Return to the Top page SiriusXM...
  • Page 114: Bluetooth Control

    See the following section for each setting. • For the cell-phones verified for compatibility, access the following URL: • Registering the Bluetooth Unit (P.83) http://www.kenwood.com/cs/ce/bt/. • Connecting the Bluetooth unit (P.84) • The units supporting the Bluetooth function have been certified for conformity with the Bluetooth Standard following the procedure prescribed by Bluetooth SIG.
  • Page 115: Bluetooth Operation

    Return to the Top page Bluetooth Operation Registering the Bluetooth Unit Touch [Search]. Searched Device List screen appears. NOTE • A new device cannot be registered if there are 5 registered Bluetooth units. Delete unnecessary registration. See Connecting the Bluetooth unit (P.84).
  • Page 116: Connecting The Bluetooth Unit

    Return to the Top page Bluetooth Operation Connecting the Bluetooth unit NOTE • If a device has been paired, the Bluetooth unit Touch the device name you want to cannot be connected from the paired device. connect. • Touching [Remove] of [Device Remove Confirm] Profile select screen appears.
  • Page 117: Playing Bluetooth Audio Device

    Return to the Top page Bluetooth Operation Playing Bluetooth Audio Device Bluetooth basic operation Simple Control screen List Control screen 1 Information display Displays the name of the track information. If the information is not available, device name is displayed. 2 Multi function key Touch to switch the multi function menu.
  • Page 118: Using Hands-Free Unit

    Return to the Top page Bluetooth Operation Select a dialing method. Using Hands-Free Unit You can use telephone function by connecting the Bluetooth telephone to this unit. Making a call Press the <TEL> button. See the following table for each method. Call by entering a phone number 1 Touch [ 2 Enter a phone number with number keys.
  • Page 119: Receiving A Call

    Return to the Top page Bluetooth Operation *1 Y ou can sort the list to begin with touched Receiving a call character. Touch [ ] to answer a phone call or ] to reject an incoming call. • Characters with no corresponding name will not appear. • During search, a non-accent character such as “u” is searched for instead of an NOTE accent character such as “ü”. • While monitoring the camera view, this screen does not appear even if a call comes in.
  • Page 120: Phone Number Preset

    Return to the Top page Bluetooth Operation Phone number preset Operations during a call Adjust the receiver volume You can register frequently used phone numbers to this unit. Press the <∞> or <5> button. Enter the number you want to register in Hands Free screen. Turn the volume knob. Touch [Preset 1], [Preset 2], or [Preset 3] for 2 seconds in the Hands Free screen.
  • Page 121 Return to the Top page Bluetooth Operation Reading SMS (Short Message Service) Message Touch [ ] (received SMS message) or ] (sent SMS message) in the Hands Free screen. Received and sent SMS messages list appears on the screen. Select a SMS message to read from the Received or Sent SMS messages list.
  • Page 122 Return to the Top page Bluetooth Operation Creating an SMS (Short Enter a message using keys and touch [SET]. Message Service) Touch [ ], [ ], [ ], [ ], [ or [ ] in the Hands Free screen. The phone numbers list appears. From the phone numbers list, select a phone number to send a SMS.
  • Page 123: Voice Recognition

    Return to the Top page Bluetooth Operation Voice Recognition Using templates You can create a message easily by selecting the desired sentence from the template list. You can access the voice recognition function of the cell-phone connected to this unit. Touch [SMS] in the Hands Free screen. You can search the cell-phone phonebook SMS Create Menu screen appears. by voice. (The functionality depends on the cell-phone.) Touch [Template]. Press the <TEL> button for 1second. Press for 1 second Template list screen appears.
  • Page 124: Smartphone Link

    Return to the Top page Bluetooth Operation Smartphone Link Hands-Free Setup You can receive Garmin’s traffic information You can perform various setup about and weather forecast by connecting handsfree function. your Android smartphone in which the Touch [Menu] on any screen. Smartphone Link application is installed to this unit. Touch [SETUP]. SETUP Menu screen appears. Press the <NAV> button. Touch [Bluetooth]. Bluetooth SETUP screen appears. Touch [TEL SET-UP] in the Bluetooth SET-UP screen.
  • Page 125 Return to the Top page Bluetooth Operation Set each item as follows. Phone Information Use Sets whether to use phonebook, outgoing, incoming and missed calls list. ON (Default): Yes. OFF: No. SMS Use Select whether to use SMS. ON (Default): Uses SMS. OFF: Not uses SMS.
  • Page 126: Setting Up

    Return to the Top page Setting Up etting Up Bright / Tint* / Color* / Contrast / Black / Monitor Screen Setup Sharpness* You can adjust image quality in iPod video, Adjusts each item. picture file, menu screen, etc. Dimmer Touch the lower left area of any screen Select dimmer mode. for at least 1 second.
  • Page 127: View Camera Control

    Return to the Top page Setting Up View Camera Control System Setup NOTE You can set up display when a CMOS-300 • Each operation in this section can be started from Series view camera is used. the multi function menu. Press the <AUD> button for 1second. Touch [Menu] on any screen. TOP Menu screen appears.
  • Page 128: User Interface

    Return to the Top page Setting Up User interface TEL Key Longer than 1 Second You can setup user interface parameters. You can set the operation performed when the TEL key is pressed for 1 second. Select from Touch [User Interface] in the list. “Voice”/”V.OFF”/”R-CAM”. User Interface screen appears.
  • Page 129: Touch Panel Adjustment

    Return to the Top page Setting Up Touch panel adjustment Language setup Touch [SET] of [Language] in the User Interface screen. Touch [Touch] in the System Menu screen. Language Setting screen appears. Touch Panel Adjustment screen appears. Set each item as follows. Follow the instruction on the screen and touch the center of each Select Mode...
  • Page 130: Ext Sw Setup

    Return to the Top page Setting Up EXT SW setup Setup memory Set up the external switch power mode. Audio Control, AV-IN SETUP, Camera, and Audio SETUP settings can be memorized. The Touch [EXT SW] in the System Menu memorized settings can be recalled at any screen. time. For example, even when the settings EXT SW screen appears. are cleared due to replacement of the battery, the settings can be restored. Set each item as follows. Touch [SETUP Memory] in the System Menu screen.
  • Page 131: Display Setup

    Return to the Top page Setting Up Follow the instruction on the screen. Display Setup Touch [Menu] on any screen. Touch [SETUP]. SETUP Menu screen appears. Touch [Display]. Recall Recalls the memorized settings. Memory Memorizes the current settings. Clear Display Menu screen appears. Clears the currently memorized settings.
  • Page 132: Monitor Angle Control

    Return to the Top page Setting Up Monitor angle control Panel color coordinate You can set the screen and button illumination color. You can adjust the position of the monitor. The selectable items differ depending on the Touch [Angle] in the Display Menu unit. screen. Touch [Color] in the Display Menu Angle setup screen appears. screen. Select a below number that represents Color screen appears.
  • Page 133 Return to the Top page Setting Up Registering original color You can register your original color. Touch [Adjust] in the Panel Color Coordinate screen. Panel Color RGB Coordinate screen appears. Use [2] and [3] to adjust each color value. Touch the desired preset key for 2 seconds.
  • Page 134: Changing Background Image

    Return to the Top page Setting Up Changing background image Touch [Enter]. You can load an image from the connected USB device and set it for the background image. Before operating this procedure, it is necessary to connect the device which has the image to load. Touch [Background] in the Display Menu screen. Background screen appears. The selected image is loaded and the Touch [STANDBY]. display returns to the Background screen. NOTE • Touching [ ] rotates counter clockwise.
  • Page 135: Navigation Setup

    Return to the Top page Setting Up NAV Interrupt Speaker Navigation Setup Selects speakers used for voice guidance of the You can set navigation parameters. navigation system. Front L: Uses the front left side speaker for Touch [Menu] on any screen. voice guidance. Touch [SETUP]. Front R: Uses the front right side speaker for SETUP Menu screen appears.
  • Page 136: Camera Setup

    Adjusts the CMOS-300 series with ID 2 set. For details, see the instruction manual of your camera. *1 T hese settings become settable only when the parking brake is on. *2 T his setting becomes settable only when the parking brake is on and the CMOS-300 series is selected. *3 T his setting becomes settable only when the parking brake is on and “Front Camera” is set to [ON]. *4 [ TEL Key Longer than 1 Second] must be set to “R-CAM”. See User interface (P.96) *5 F or DNX570TR, when the video is switched to the rear view camera the audio is also switched to the rear view camera.
  • Page 137: Software Information

    Return to the Top page Setting Up However when you select the rear view Software Information camera after power on the unit, only the video of the rear view camera is available for Check the software version of this unit. some ten seconds. Touch [Menu] on any screen. And when you are using Bluetooth hands- free phone, the audio remains Bluetooth Touch [SETUP]. hands-free phone. SETUP Menu screen appears. Touch [Software]. Software Information screen appears. Confirm the software version. Touch [Update] as necessary. NOTE • For how to update the software, see the relevant update procedure manual which comes with the...
  • Page 138: Av Input Setup

    *2 [ AV-IN2 Name] becomes settable when Set each item as follows. “AV-IN2” is selected in [iPod AV Interface Use]. *3 W hen ”Rear Camera” is selected for [AV-IN Interface], ”Rear Camera” is selected as the default of [AV-IN Name]. AV-IN Interface (DNX570TR) Select the source connected to AV-IN. Rear Camera: Select when the rear view camera is connected. AV-IN (Default): Select when AV device is connected.
  • Page 139: Av Output Interface Setup

    Return to the Top page Setting Up AV Output Interface Setup External Device Control You can select an AV source to be output at the AV OUTPUT port. Default is “VIDEO1”. Control the external device power supply. Touch [Menu] on any screen. Touch [EXT SW] in the Source Control screen. Touch [SETUP]. SETUP Menu screen appears. Touch [AV-OUT]. EXT SW Control screen appears. NOTE AV-OUT Interface screen appears.
  • Page 140: Controlling Audio

    Return to the Top page Controlling Audio ñ ontrolling Audio Setting Audio NOTE • Each operation in this section can be started from the multi function menu. Touch [Audio SETUP]. You can adjust the various settings such as audio balance or subwoofer level. Touch [ ] on any screen. Touch [Audio]. Audio screen appears.
  • Page 141: Speaker Setup

    Return to the Top page Controlling Audio Ñ Speaker setup Subwoofer (DNN770HD) Select if you are using a subwoofer. You can select a speaker type and its size to get the best sound effects. Tweeter (DNN990HD) When the speaker type and size are set, You can set the tweeter when you are the speaker crossover network is set selecting front speakers. automatically. None, Small, Middle, Large Touch [Speaker Select] in the Audio X’over SETUP screen.
  • Page 142: Crossover Network Setup

    Return to the Top page Controlling Audio Ñ Car type setup (DNN990HD) Crossover network setup You can set a crossover frequency of You can setup the car type and speaker speakers. network, etc. Touch the speaker to set the crossover Touch [Car Type] in the Audio SETUP in the Speaker Select screen. screen. Car Type screen appears. Touch [X’over].
  • Page 143 Return to the Top page Controlling Audio Ñ DSP select (DNN990HD) Speaker location setup You can select whether using DSP (Digital In the Car Type screen, touch Signal Processor) System. [Location]. Speaker Location screen appears. Touch [Bypass] or [Through] of [DSP Select] in the Audio SETUP screen. Select the speaker locations using [D].
  • Page 144: Controlling General Audio

    Return to the Top page Controlling Audio Loudness (DNN770HD) Controlling General Audio Turns the loudness control function on or off. If turned on, high and low tones are Touch [Audio Control]. automatically enhanced during low volume. Settable only when zone function (P.147) set to off.
  • Page 145: Equalizer Control

    Return to the Top page Controlling Audio Controlling equalizer manually Equalizer Control The Graphic Equalizer cannot be set when you select [iPod] in the Equalizer screen. You can adjust equalizer by selecting the optimized setting for each category. Touch [EQ] in the Equalizer screen. Touch [Equalizer]. Touch the screen and set the Graphic Equalizer as desired. Equalizer screen appears. Gain level (light green boxed area) Ñ...
  • Page 146 Return to the Top page Controlling Audio Ñ DNN770HD operation Controlling equalizer manually Touch [Tone] in the Equalizer screen. Controlling EQ curves Set each item as follows. Select EQ curve from [Natural], [Rock], [Pops], [Easy], [Top40], [Jazz], and [User] using [2] and [3]. FREQ Adjusts the center frequency for each range.
  • Page 147: Space Enhancer

    Return to the Top page Controlling Audio Ñ Space Enhancer Sound Effect (DNN990HD) Touch [Space Enhancer] in the Sound You can set sound effects. Effect screen. Touch [Sound Effect]. Space Enhancer screen appears. Sound Effect screen appears. Touch [Small], [Large], or [OFF]. Each setting value indicates the soundscape level.
  • Page 148 Return to the Top page Controlling Audio Ñ Ñ Highway sound setting Realizer and Supreme You can boost a certain range of sound that You can restore the sound lost due to audio becomes hard to hear due to road noise. compression to a realistic sound. Touch [Highway Sound] in the Sound Touch the screen in the Sound Effect Effect screen. screen. Highway Sound screen appears. Realizer Select the boost level from among Realizer is sound enhancement and boosting [High], [Low], and [OFF].
  • Page 149: Zone Control

    Return to the Top page Controlling Audio Zone Control NOTE • When the rear speaker sound is switched, the You can select different sources for both audio source that is output at the AV OUTPUT front and rear positions in the vehicle. terminal is also switched to the same source. • When the dual zone function is set to on, the Touch [Zone Control].
  • Page 150: Listening Position

    Return to the Top page Controlling Audio Ñ Position DTA Control Listening Position You can fine-adjust your listening position. (DNN990HD) In Position screen, touch [Adjust]. You can adjust the sound effects according Select the speaker you wish to adjust to your listening position. by touching speaker icon. Touch [Position]. Set DTA as follows. Position screen appears. Select listening position from [Front R] (Right front), [Front L] (Left front), [Front All] (All front), and [All]...
  • Page 151 Return to the Top page Controlling Audio NOTE • Make fine adjustment of the delay time of the speaker output specified here to have a more suitable environment for your vehicle. • If you specify the distance from the center of the currently set listening position to every speaker, the delay time will be automatically computed and set.
  • Page 152: Remote Control

    This unit can be operated using the remote control. For DNX890HD, DNX7700BT, DNX690HD, and DNX5700BT, the remote control is supplied with the unit. For DNX570HD, DNX570TR, and DNX5080EX the remote control is the optional accessory (KNA- RCDV331). 2CAUTION • Put the remote control in a place where it will not move during braking or other operations. A dangerous situation could result, if the remote control falls down and gets wedged under the pedals while driving.
  • Page 153: Functions Of The Remote Control Buttons

    Return to the Top page Remote Controller Operation Functions of the Remote control Buttons Switching the operation mode Direct search mode The functions operated from the remote Using the remote control, you can jump control differ depending on the position of directly to the desired file, track chapter, etc. the mode switch. with entering the number corresponding to the content. • NOTE • • This operation cannot be performed for USB • device and iPod.
  • Page 154 Return to the Top page Remote Controller Operation Location of Function Name the mode switch − Switches to the source to be played. In hands-free mode, hangs up the phone. − Switches between the navigation and the source screens. MENU Stops playing and memorizes the last point where the disc stopped.
  • Page 155 Return to the Top page Remote Controller Operation Location of Function Name the mode switch VOICE Switches navigation display on/off. Displays the DVD menu. Turns the playback control on or off while playing VCD. Speaks the voice guidance. 10 VIEW AUD, DVD Switches the AV source to be output.
  • Page 156: Troubleshooting

    Return to the Top page Troubleshooting roubleshooting Problems and Solutions If any trouble occurs, first check the following table for possible problems. • Some functions of this unit may be disabled by some settings made on this unit. • What might seem to be a malfunction in your unit may just be the result of slight misoperation or miswiring. About settings Problem Reason Solution • Cannot set up the subwoofer. Subwoofer is not set Set the subwoofer to on. • Cannot set up subwoofer phase. to on.
  • Page 157: Error Messages

    Mecha Error The disc player is malfunctioning. Eject the disc and try inserting it again. Contact the Kenwood dealer if this indicator continues blinking or the disc cannot be ejected. Disc Error An unplayable disc is inserted. Change the disc.
  • Page 158 Return to the Top page Troubleshooting Error Message Cause Solution Disconnected The iPod/Bluetooth audio player Change the source to any source other than (iPod) is selected as a source although iPod/Bluetooth. Connect an iPod/Bluetooth no iPod/Bluetooth audio player is audio player, and change the source to iPod/ connected.
  • Page 159: Resetting The Unit

    Return to the Top page Troubleshooting Resetting the Unit If the unit or the connected unit fails to operate properly, reset the unit. Press the <Reset> button. The unit returns to factory settings. NOTE • Disconnect the USB device before pressing the <Reset> button. Pressing the <Reset> button with the USB device connected can damage the data stored in the USB device. For how to disconnect the USB device, see How to Play Media (P.13).
  • Page 160: Appendix

    Return to the Top page Appendix ppendix Playable Media and Files You can play various kinds of media and files on this unit. List of playable discs Disc types Standard Support Remark ‡ DVD Video DVD Audio × DVD-VR × ‡ DVD-R* • MP3/WMA/AAC/MPEG1/MPEG2/DivX* playback • Multi-border/Multisession playback (Playback depends on authoring conditions) ‡...
  • Page 161 • An online manual about audio files is put on the ¡P site, www.kenwood.com/cs/ce/audiofile/. On this online manual, detailed information and notes which are not written in this manual are provided. Make sure to read through the online...
  • Page 162 Changing the browse item will display a correct title, etc. • When the iPod is connected to this unit, “KENWOOD” or “✓” is displayed on the iPod to indicate that you cannot operate the iPod.
  • Page 163: Status Bar Indicator Items

    Return to the Top page Appendix Status Bar Indicator Items Shown below is a list of indicators displayed on the status bar in the screen. Current status of this unit is displayed on the bar. Status bar ● ■ General C-REP The chapter repeat function is on. T-REP The attenuator is active. The title repeat function is on. DUAL The dual zone function is on. ●...
  • Page 164 Return to the Top page Appendix VER1 The VCD version is 1. Indicates the reception state of traffic information. VER2 • White: TP is being received. The VCD version is 2. • Orange: TP is not being received. The repeat function is on. ●...
  • Page 165: Region Codes In The World

    Return to the Top page Appendix Region Codes in the World The DVD players are given a region code according to the country or area it is marketed, as shown in the following map. ● ■ DVD disc marks ● ■ Operation regulatory marks With this DVD, some functions of this unit such as the play function may be restricted depending on the location where the DVD is playing.
  • Page 166: Dvd Language Codes

    Return to the Top page Appendix DVD Language Codes Code Language Code Language Code Language Afar Interlingua Kirundi Abkhazian Interlingue Romanian Afrikaans Inupiak Russian Amharic Indonesian Kinyarwanda Arabic Icelandic Sanskrit Assamese Italian Sindhi Aymara Japanese Sangho Azerbaijani Javanese Serbo-Croatian Bashkir Georgian Singhalese Byelorussian...
  • Page 167: Specifications

    Return to the Top page Appendix S/N Ratio (dB) Specifications DNX890HD, DNX7700BT : 100 dB (DVD-Video 96 kHz) ● ■ Monitor section DNX690HD, DNX570HD, DNX570TR, DNX5080EX, DNX5700BT Picture Size : 98 dB (DVD-Video 96 kHz) DNX890HD, DNX7700BT Dynamic Range : 6.95 inches (diagonal) wide : 156.6 mm (W) x 81.6 mm (H)
  • Page 168 Appendix ● ■ Bluetooth section ● ■ FM tuner section Technology Frequency Range (step) : Bluetooth Ver.2.1+EDR Certified DNX890HD, DNX690HD, DNX570HD, DNX570TR, DNX5080EX Frequency : 87.9 MHz – 107.9 MHz (200 kHz) : 2.402 – 2.480 GHz DNX7700BT, DNX5700BT Output Power : 87.5 MHz –...
  • Page 169 7-3/16 x 4-6/16 x 6-4/16 inch Speaker Impedance : 4 – 8 Ω Operational Temperature Range : -10 °C – +60 °C Tone (DNX690HD, DNX570HD, DNX570TR, DNX5080EX, DNX5700BT) Weight Bass: 100Hz ± 8dB DNX890HD, DNX7700BT: 2.5 kg (5.4 lbs) Middle: 1kHz ± 8dB DNX690HD, DNX570HD, DNX570TR, DNX5080EX, Treble: 10kHz ±...
  • Page 170: About This Unit

    Bluetooth SIG, Inc. and any use of such marks INCORPORATED in JAPAN and other countries. by JVC KENWOOD Corporation is under license. • ABOUT DIVX VIDEO: DivX® is a digital video format Other trademarks and trade names are those of their created by DivX, LLC, a subsidiary of Rovi Corporation.
  • Page 171 Return to the Top page Appendix • About PANDORA® internet radio: • Requirements Aha™: Requirements for listening to the PANDORA® internet Requirements for listening to the Aha™ are as follows: radio are as follows: iPhone or iPod touch iPhone or iPod touch • Use an Apple iPhone or iPod touch running iOS4 • Use an Apple iPhone or iPod touch running under or later.
  • Page 172 Return to the Top page Appendix • About iHeartRadio®: DNX890HD/ DNX690HD/ DNX570HD/ DNX570TR/ Requirements for using iHeartAuto™ are as follows: DNX5080EX: iPhone or iPod touch ● ■ FCC WARNING • Use an Apple iPhone or iPod touch running iOS5 This equipment may generate or use radio or later.
  • Page 173 Return to the Top page Appendix DNX890HD/ DNX690HD/ DNX570HD/ DNX570TR/ ● ■ CALIFORNIA, USA DNX5080EX: This product contains a CR Coin Cell Lithium Battery ● ■ IC (Industry Canada) Notice which contains Perchlorate Material – special handling may apply. This device complies with Industry Canada licence- See www.dtsc.ca.gov/hazardouswaste/perchlorate.
  • Page 175: Gps Navigation

    GPS NAVIGATION SYSTEM DNX4230TR DNX570TR GPS NAVIGATION INSTRUCTION MANUAL © IM366_Nav_TR_K_En_00...
  • Page 176 Contents Navigation End-User License Agreements Starting a Route Previewing Multiple Routes Following a Route Getting Started Your Route on the Map Using the Navigation System Using the Navigation Map Help When You Need It Adding a Point to a Route Searching Help Topics Taking a Detour Status Bar Icons...
  • Page 177 Using the Apps Traffic Information About Smartphone Link Traffic Subscription Activation (DNX570TR) Downloading Smartphone Link Traffic Subscription Activation Connecting to Smartphone Link (DNX4230TR) Sending a Location from Your Phone Understanding Traffic Disabling Calls While Connected Traffic Data Using Smartphone Link...
  • Page 178 Contents Customizing the Settings Adding Truck or RV Profiles Activating Truck or RV Profiles Editing Truck or RV Profiles Changing the Map Settings Enabling Maps Changing the Navigation Settings Adjusting the Display Settings Route Preferences Updating the Time Settings Setting the Languages Adding Security Device and Privacy Settings Restoring Settings...
  • Page 180: End-User License Agreements

    End-User License Agreements Software License Agreement suppliers) and affiliated companies on the other hand. BY USING THE DNX4230TR / DNX570TR, YOU AGREE TO BE BOUND BY THE TERMS AND CONDITIONS OF IMPORTANT: CAREFULLY READ THIS LICENSE THE FOLLOWING SOFTWARE LICENSE AGREEMENT.
  • Page 181 TOTAL AGGREGATE LIABILITY WITH RESPECT Data to any other person or third party. Only those TO ITS OBLIGATIONS UNDER THIS AGREEMENT rental car companies that are specifically authorized OR OTHERWISE WITH RESPECT TO THE GARMIN by Garmin in writing to rent Garmin products PRODUCT OR THE DATA SHALL NOT EXCEED $1.00.
  • Page 182 End-User License Agreements of the nature of the cause of the claim, demand terminated (by you or by Garmin) or expires, or or action alleging any loss, injury or damages, (ii) Garmin terminates this Agreement for any direct or indirect, which may result from the use reason, including, but not limited to, if Garmin or possession of the data or the Map Data.
  • Page 183 hereunder. Government End Users. If End User is an agency, department, or other entity of the United States Government, or funded in whole or in part by the U.S. Government, then use, duplication, reproduction, release, modification, disclosure or transfer of the Product and accompanying documentation is subject to restrictions as set forth in DFARS 252.227-7014(a)(1) (JUN 1995) (DOD commercial computer software definition), DFARS...
  • Page 184 End-User License Agreements accuracy, exhaustiveness, and completeness of NAVTEQ Traffic™ End User License the Traffic Data, which may contain inaccuracies Agreement and/or errors from time to time. To the maximum extent permitted by applicable law, any and all Your Garmin product may be equipped to receive warranties of any kind whatsoever with regard to traffic data.
  • Page 185 States government or any other entity seeking or applying rights similar to those customarily claimed by the United States government, this Data is a “commercial item” as that term is defined at 48 C.F.R. (“FAR”) 2.101, is licensed in accordance with this Agreement, and the Traffic Data delivered or otherwise furnished shall be marked and embedded as appropriate with the following...
  • Page 186: Getting Started

    Getting Started The first time you use your Kenwood Navigation System, you need to set up your system. The Help menu provides additional information. Help When You Need It WARNING See "Safety Precautions and Important Information" Select Apps > Help to view information in the Quick Start Guide for product warnings and about using the device.
  • Page 187: Satellite Signals

    Entering a Truck or RV Profile Satellite Signals After your vehicle is turned on, the navigation WARNING system begins acquiring satellite signals. The Entering your vehicle profile characteristics does system may need a clear view of the sky to acquire not guarantee that your vehicle's characteristics satellite signals.
  • Page 188: Finding Locations

    Finding Locations The navigation system offers many methods for finding locations. The detailed maps loaded in your navigation system contain locations, such as restaurants, hotels, and auto services. You can use categories to browse for nearby businesses and attractions. Finding a Location by Category Enter a search term.
  • Page 189: Finding An Address

    Finding an Address Enter the second street name, and select Next. • The order of the steps may change depending on the map data loaded on your device. If necessary, select the street. Select Where To? > Address. If necessary, select the intersection. Enter the address number, and select Done.
  • Page 190: Finding A Location By Browsing The Map

    Finding Locations Finding a Location by Browsing the Map If necessary, select the appropriate destination. Before you can find places included in the map data, such as restaurants, hospitals, and fuel stations, you must enable the map layer for places Saving a Home Location along the road (page...
  • Page 191: Finding Parking

    If necessary, enter a name, and sales. select OK. ⁄ • The TruckDown directory is available on the DNX570TR, Saving Your Current Location but it is not available in all areas From the map, select the vehicle icon. Data for the directory is updated periodically.
  • Page 192: Editing A Saved Location

    Finding Locations Editing a Saved Location Deleting a Saved Location ⁄ Select Where To? > Saved. • Deleted locations cannot be recovered. If necessary, select a category. Select Where To? > Saved. Select a location. Select > Delete Saved Places. Select Select the box next to the saved locations to delete, and select Delete.
  • Page 193: Navigation

    Garmin and Select Go!. JVC KENWOOD will not be responsible for any traffic fines or citations you receive for failing to follow all If necessary, select a route.
  • Page 194: Adding A Point To A Route

    Garmin and JVC KENWOOD will not be responsible for any traffic fines or citations that you may receive for Adding a Point to a Route...
  • Page 195: Finding Exit Services

    Navigation Finding Exit Services Adding a Custom Avoidance Area Custom avoidances allow you to avoid specific From the map, select > Exit Services. areas and sections of road. You can enable and disable custom avoidances as needed. Use the arrows to select an upcoming exit. Select Settings >...
  • Page 196: Deleting Custom Avoidances

    Deleting Custom Avoidances Select Settings > Navigation > Custom Avoidances. Select an option: • To delete all custom avoidances, select • To delete one custom avoidance, select the avoidance, and select > Delete. Enabling Advanced Detours Select Settings > Navigation > Advanced Detours. Taking a Detour Around Specified Areas You can take a detour for a specified distance along your route or detour around specific roads.
  • Page 197: The Map Pages

    The Map Pages You can customize which data appear on the map and view upcoming turns and current location information. Customizing the Map Layers Changing the Map Perspective You can customize which data appear on the Select Settings > Map & Vehicle > Driving map, such as icons for points of interest and road Map View.
  • Page 198: Viewing A List Of Turns

    Viewing a List of Turns Viewing Junctions When you are navigating a route, you can view all While navigating a route, you can view the of the turns and maneuvers for your entire route junctions on major roadways. When you approach and the distance between turns.
  • Page 199: Resetting Trip Information

    The Map Pages Resetting Trip Information From the map, select > Trip Computer. Select > Reset All. Select an option: • When not navigating a route, select Select All to reset every data field, except the speedometer, on the page. • Select Reset Trip Data to reset the information on the trip computer. • Select Reset Max. Speed to reset the maximum speed. • Select Reset Trip B to reset the odometer. Viewing Current Location Information You can use the Where Am I? page to view information about your current location.
  • Page 200: Using The Apps

    Before you can connect to Smartphone Link, you must download and install the Smartphone Link application on your phone. Start Smartphone Link on your phone. See your other Kenwood system manuals and your phone owner's manual for connection information. appears in the status bar on your device when Smartphone Link is connected.
  • Page 201: About Garmin Live Services

    About Garmin Live Services About ecoRoute Before you can use Garmin Live Services, your The ecoRoute™ feature calculates your vehicle device must be connected to a supported phone fuel economy, carbon footprint, and the fuel price running Smartphone Link (page 26).
  • Page 202: Taking The Ecochallenge

    Select Select OK. Exporting a Mileage Report Connect a USB mass storage device to your Resetting Your Score Kenwood unit. You can restart your current ecoChallenge. Select Apps > ecoRoute™ > Mileage Select Apps > ecoRoute > ecoChallenge. Report. Select >...
  • Page 203: Setting Routes That Use Less Fuel

    Setting Routes that Use Less Fuel Select > Weather Radar. ⁄ Viewing Weather Alerts • Less Fuel is available only in Automobile mode. While you are traveling with your device, weather Select Settings > Navigation > Calculation alerts may appear on the map. You can also Mode.
  • Page 204: Navigating To A Saved Trip

    Using the Apps Using the World Clock Select a saved trip. Select Apps > World Clock. Select an option: • To change the arrival or departure time, select a If necessary, select a city, enter a city location in the trip. name, and select Done. • To record how long you will stay at a location, select a location in the trip, and select Duration. • To view the trip on the map, select Map. Viewing the World Map Navigating to a Saved Trip Select Apps >...
  • Page 205: Traffic Information

    • Traffic information is not available in all areas. Traffic Data Using Smartphone Link NOTICE Garmin and JVC KENWOOD are not responsible for ⁄ the accuracy or timeliness of the traffic information. • This feature is not available in all areas.
  • Page 206: Traffic On Your Route

    Traffic on Your Route Viewing Traffic on the Map When calculating your route, the navigation The traffic map shows color-coded traffic flow system examines the current traffic and and delays on nearby roads. automatically optimizes the route for the shortest From the map, select time.
  • Page 207: About Traffic Cameras

    Traffic Information About Traffic Cameras The traffic subscription code cannot be reused. You must obtain a new code each ⁄ time you renew your service. If you own • This feature is not available in all areas. multiple FM traffic receivers, you must obtain a new code for each receiver. Before you can use this feature, you must subscribe to the photoLive service, and your Select Next on the device. device must be connected to a supported phone running Smartphone Link (page...
  • Page 208: Trucking Features

    About IFTA Logging Exporting a Jurisdiction Summary ⁄ Select Apps > IFTA Logging > Juridiction • This feature is available on the DNX570TR, but it is not Summary. available in all areas. You can archive data needed for International If necessary, select a truck.
  • Page 209: About Hours Of Service

    Select Apps > Hours of Service. ⁄ Select a • This feature is available on the DNX570TR, but it is not available in all areas. Follow the on-screen instructions. • Before you can use Hours of Service, you must be in Truck mode, and you must create a driver profile.
  • Page 210: Using Driver Logs

    If necessary, select Start Day. If necessary, select End Day. Select Save. Managing Shipments ⁄ • This feature is available on the DNX570TR, but it is not available in all areas. Select Apps > Hours of Service. Select a driver. Select Manage Shipments.
  • Page 211: Customizing The Settings

    Customizing the Settings You can customize the settings of your GPS navigation system. Adding Truck or RV Profiles Editing Truck or RV Profiles Before you can activate a profile, you must WARNING activate a different profile. Entering your vehicle profile does not guarantee that your vehicle's characteristics will be accounted Select Settings >...
  • Page 212: Changing The Navigation Settings

    Changing the Navigation Settings Updating the Time Settings Select Settings > Navigation. Select Settings > Units & Time. • Calculation Mode—sets route preference. • Current Time—select Automatic to update the time automatically. When Automatic is not selected, you can • Avoidances—sets road features to avoid on a route. adjust the time in 15-minute increments.
  • Page 213: Restoring Settings

    Customizing the Settings Restoring Settings You can restore a category of settings or all settings to the factory default values. Select Settings. If necessary, select a settings category. Select > Restore. English...
  • Page 214: Appendix

    Before you can update the navigation system No Trailers Allowed software, you must have a USB mass storage device and an Internet connection. No Hazardous Materials Allowed Go to www.garmin.com/kenwood. No Flammables Allowed Select Update. No Water Pollutants Allowed No Left Turn Follow the on-screen instructions.
  • Page 215: Updating The Map Data

    Garmin POI Loader to install the POIs onto a You can purchase updated map data from Garmin USB mass storage device. Use the USB mass or ask your Kenwood dealer or Kenwood service storage device to load the POIs. The POI Loader is center for details.
  • Page 216 For the latest free software updates (excluding map data) throughout the life of your Garmin products, visit the Garmin Web site at www.garmin.com/kenwood. © 2013 Garmin Ltd. or its subsidiaries Garmin International, Inc. 1200 East 151st Street, Olathe, Kansas 66062, USA Garmin (Europe) Ltd.

Table of Contents