Table of Contents
Advertisement
DNX7210BT
DNX5210BT
DNX5510BT
DNX4210BT
GPS NAVIGATION SYSTEM
INSTRUCTION MANUAL
Before reading this manual, click the button below to check the latest edition and the
modified pages.
Check the latest edition
© 2011 JVC KENWOOD Corporation
12DNXMid_IM345_Ref_E_En_01 (E/Q)
What Do You Want To Do?
Thank you for purchasing the KENWOOD GPS NAVIGATION SYSTEM.
In this manual, you will learn various convenient functions of the system.
Click the icon of the media you want to play.
With one-click, you can jump to the section of each media!
VCD
iPod
USB
Disc Media
Music CD
DVD VIDEO
BT Audio
SD card
Tuner
TV
1
Advertisement
Table of Contents
Related Manuals for Kenwood DNX7210BT
Summary of Contents for Kenwood DNX7210BT
- Page 1 What Do You Want To Do? DNX7210BT Thank you for purchasing the KENWOOD GPS NAVIGATION SYSTEM. In this manual, you will learn various convenient functions of the system. DNX5210BT DNX5510BT DNX4210BT Click the icon of the media you want to play.
-
Page 2: Table Of Contents
Remote Controller Troubleshooting ontents Battery Installation __________________ 92 Problems And Solutions ______________ 96 Functions Of Error Messages _____________________ 97 Before Use Bluetooth Control The Remote Controller Buttons ______ 93 Resetting The Unit __________________ 99 Registering And Connecting How To Read This Manual Bluetooth Unit ____________________ 54 Appendix Basic Operations... -
Page 3: Before Use
NOTE Introduces some tips, notes, etc. does not operate normally after a while, • If you use a remote controller, you can jump • Do not watch or fix your eyes on the unit’s directly to the desired track/file with entering the consult your Kenwood dealer. display when you are driving for any track/folder/file number, play time, etc. For details, Reference mark “Direct search mode” (p.81). extended period. -
Page 4: Basic Operations
• Displays Graphic Equalizer screen (P.87).* • Pressing for 1 second switches camera view display on/off. • Displays the navigation screen. • Pressing for 1 second switches AV out sources. MENU • Displays the Top Menu screen (P.17). • Pressing for 1 second turns the power off. • When the power off, turns the power on. • Displays the Hands Free screen (P.54). • Pressing for 1 second displays the Screen Control screen. 0 (Eject) • Ejects the disc. • When the panel is opened, pressing closes the panel and pressing for 1 second ejects the disc forcibly. • When the panel is closed, pressing for 1 second fully opens the panel to NOTE the location of the SD card slot. • The panels shown in this guide are examples used to provide clear explanations of the operations. For this reason, they may be different from the actual panels. Remote • Receives the remote control signal. • In this manual, each model name is abbreviated as follows. Sensor • You can enable or disable this feature by Remote Sensor (P.70). DNX7210BT : If above icon is showed, read the article applicable to the unit you use. • If [Remote Sensor] is set to off, the remote control of TV reception is rejected. Disc insert A slot to insert a disc media. slot SD card slot A slot to insert an SD card. The card is used for upgrading the map. For how to upgrade the map, refer to the instruction manual of the navigation system. Also, you can play audio/visual file in the card. * The display may not switch to the Graphic Equalizer screen in some conditions. - Page 5 Return to the Top page Return to the Top page Basic Operations Basic Operations DNX5210BT/DNX5510BT/DNX4210BT Number Name Motion fi (Reset) • If the unit or the connected unit fails to operate properly, the unit returns to factory settings when this button is pressed (P.99). • If the SI function is turned on, this indicator flashes when the vehicle ignition is off (P.72). MENU • Displays the Top Menu screen (P.17). • Pressing for 1 second turns the power off. • When the power off, turns the power on. • Displays the navigation screen. • Pressing for 1 second switches AV out sources. • Displays the Hands Free screen (P.54). • Pressing for 1 second turns off the display. Volume Knob • Pressing switches attenuation of the volume on/off. • Turning adjusts volume up or down. • Pressing for 1 second displays Tone Control screen (P.88).* SCRN • Displays the Screen Control screen. NOTE • Pressing for 1 second displays rear view camera display. • The panels shown in this guide are examples used to provide clear explanations of the operations. For this reason, Remote • Receives the remote control signal.
-
Page 6: Turning On The Unit
Basic Operations Basic Operations Initial setup urning On The Unit Perform this setup when you use this unit first time or when you reset the unit (P.99). The method of turning on is different depending on the model. Set each item as follows. Press the <MENU> button. Language Select the language used for the control screen and setting items. Default is “British English (en)” for DNX7210BT/DNX5210BT/DNX4210BT and “Russian” for DNX5510BT. 1 Touch [SET]. 2 Touch [2] or [3] to select the desired language. 3 Touch [Enter]. The unit is turned on. For detailed operation, see Language setup (P.71). ● To turn off the unit: Angle Press the <MENU> button for 1 second. Adjust the position of the monitor. Default is “0”. -
Page 7: How To Play Media
Return to the Top page Return to the Top page Basic Operations Basic Operations Touch [Finish]. ● To eject the disc: ow To Play Media Press the <0> button. Music CD and disc media Press the <0> button. USB device Connect the USB device with the USB cable. -
Page 8: Detaching The Front Panel
Basic Operations Basic Operations SD card External device etaching The Front Detach the panel as the diagrams DNX7210BT: Press the <0> Insert the plug into the AV-IN jack. Panel below. button for 1 second to open the front panel. You can detach the front panel to prevent theft. -
Page 9: Operating With The Top Menu Screen
Return to the Top page Return to the Top page Basic Operations Basic Operations Attaching the front panel perating With The Top Menu Screen Hold the panel securely so as not Most functions can be performed from the Top Menu screen. to drop it accidentally, and fit it Touch [Menu] on any screen. onto the attaching plate until it is firmly locked. -
Page 10: Common Operations
Return to the Top page Return to the Top page Basic Operations Basic Operations ● Customizing Top Menu screen List screen Drag the icon you want to register to the There are some common function keys in the list screens of most sources. upper line. You can move up to three icons. (Scroll) Scrolls the displayed text. etc. Touch keys with various functions are displayed here. Displayed keys differ depending on the current audio source, status, etc. For examples of functions of each key, refer ommon Operations to the table below. Introduces the common operations. Function General Lists all the music in the lower hierarchy. There are some functions which can be operated from most screens. -
Page 11: Navigation Operation
Return to the Top page Return to the Top page Basic Operations Basic Operations Touch [ ] or [ ] in the navigation screen. avigation Operation For details on the navigation function, please refer to the Navigation Instruction Manual. Display the navigation screen Press the <NAV> button. Touching this area displays the audio screen. : D isplays the navigation and control : D isplays the navigation and current keys of the current source. -
Page 12: Dvd/Video Cd (Vcd) Operation
Return to the Top page Return to the Top page DVD, VCD DVD, VCD 5 Sub function menu VD/Video CD (VCD) Operation The following functions can be performed by using keys in this area. • Repeats the current content: T ouch [ ]. Each time you touch the key, repeat mode switches in the DVD/VCD Basic Operation following sequence; DVD: "title repeat" , "chapter repeat" , "function off" Most functions can be controlled from the source control screen and playback screen. VCD (PBC On): Does not repeat VCD (PBC Off ): "track repeat" , "function off"... -
Page 13: Dvd Disc Menu Operation
Return to the Top page Return to the Top page DVD, VCD DVD, VCD Multi function menu Highlight control DVD Disc Menu Operation Highlight control lets you control the DVD You can set up some items in the DVD-VIDEO menu by touching the menu key directly on disc menu. the screen. The functions of each key are as follows. Touch illustrated area during Touch [Highlight] in the Menu Control playback. [4] [¢] screen. -
Page 14: Zoom Control For Dvd And Vcd
Return to the Top page Return to the Top page DVD, VCD DVD, VCD Touch the key which corresponds to Menu/Subtitle/Audio Language* DVD Setup NOTE desired setting item. See Language setup (P.28). • For DVD, please refer to DVD Play Mode Setting You can set up the DVD playback functions. (P.25) to display the Zoom Control screen. Dynamic Range Control* Sets the dynamic range. -
Page 15: Language Setup
Return to the Top page Return to the Top page DVD, VCD DVD, VCD Language setup Parental level Disc setup This setting is for the language used in the Sets a parental level. You cannot setup this Performs setup when using disc media. menu, subtitle, and voice. You cannot setup item during DVD playback. Touch [SET] of [DISC SETUP]. these items during DVD playback. Touch [SET] of [Parental Level]. DISC SETUP screen appears. Touch [SET] of the desired Parental Pass screen appears. -
Page 16: Cd/Audio And Visual Files/ Ipod Operation
Return to the Top page Return to the Top page CD, Disc, iPod, USB device, SD card CD, Disc, iPod, USB device, SD card 4 Multi function menu D/Audio And Visual Files/iPod Operation Various functions can be performed by using keys in this area. For details on the menu, see Multi function menu (P.34). Music/Video/Picture Basic Operation 5 Sub function key Touch to display “Sub function menu” (7 in this table). - Page 17 CD, Disc, iPod, USB device, SD card CD, Disc, iPod, USB device, SD card USB device, SD card, and iPod Picture/video screen NOTE • SD card is for DNX7210BT and DNX5210BT only. • The screen shot below is for USB device. It may be different from the one for iPod and SD card. Simple Control screen List Control screen 9 Searching file area (picture/video file only) • Touch to search the next/previous file.
- Page 18 Return to the Top page Return to the Top page CD, Disc, iPod, USB device, SD card CD, Disc, iPod, USB device, SD card Multi function menu Sub function menu Music CD Disc media Music CD Disc media iPod USB device and SD card iPod USB device and SD card The following functions can be performed by using keys in this area.
-
Page 19: Search Operation
Return to the Top page Return to the Top page CD, Disc, iPod, USB device, SD card CD, Disc, iPod, USB device, SD card Other search Category search (USB device, SD card, Link search (USB device, SD card, and Search Operation and iPod only) iPod only) When you want to narrow the list down,... - Page 20 Return to the Top page Return to the Top page CD, Disc, iPod, USB device, SD card CD, Disc, iPod, USB device, SD card Touch [ 3 ] on the selected artwork. Folder search (USB device, SD card, Picture search (USB device and SD card Search from album artwork and disc media only) only)
-
Page 21: Movie Control
Return to the Top page Return to the Top page CD, Disc, iPod, USB device, SD card CD, Disc, iPod, USB device, SD card Favorite list Touch the desired artwork in the Movie Control USB/SD/iPod/DivX Setup favorite list. You can create an original playlist of your favorite 10 albums by selecting album You can adjust the movie playback from a You can perform setup when using USB/SD/ artworks. - Page 22 Return to the Top page Return to the Top page CD, Disc, iPod, USB device, SD card CD, Disc, iPod, USB device, SD card USB/SD setup iPod setup DivX setup Set each item as follows. Set each item as follows. NOTE • The screen shot below is for USB device. However, the setting items of USB and SD setup are quite...
-
Page 23: Radio And Tv Operation
Return to the Top page Return to the Top page Radio, TV Radio, TV 7 Sub function menu adio and TV Operation The following functions can be performed by using keys in this area. • Switches the band: Touch [AM] or [FM]. Radio Basic Operation • Tunes in a station: T ouch [1] [¡]. The method of frequency switching can be changed. See Multi function menu (P.45). Most functions can be controlled from the source control screen. The bar in center (tuner only) shows the current frequency location. 8 List switching key NOTE Touch to switch between the preset list and the information list. -
Page 24: Tv Basic Operation
Return to the Top page Return to the Top page Radio, TV Radio, TV TV Basic Operation TV screen Most functions can be controlled from the source control screen and TV screen. NOTE • Set the remote controller mode switch to TV mode before starting operation, see Switching the operation mode (P.93). • You can only operate TV with the optional accessory TV tuner connected. For analog TV, KTC-V301E/V300E/V500E is necessary. For digital TV, KTC-D500E or KTC-D600E is necessary. • During playback, press the <MENU> button to display the source control screen. 6 Switching channel area Simple Control screen List Control screen Touch to switch the channel. -
Page 25: Memory Operation
Return to the Top page Return to the Top page Radio, TV Radio, TV EXT SW] Memory Operation Touch to control the external device power supply. For details, see External Device Control (P.80). Touch illustrated area during [ REAR playback to switch the band you want Auto memory to store in memory. Touch to mute the rear speaker. -
Page 26: Selecting Operation
Return to the Top page Return to the Top page Radio, TV Radio, TV Manual memory Search by program type Traffic Information (FM tuner only) (FM Tuner Only) You can store the current receiving station or channel in memory. You can tune to a station with a specific You can listen and watch the traffic program type when listening to FM. Select a station or channel you wish information automatically when a traffic to store in memory. -
Page 27: Tuner Setup
Return to the Top page Return to the Top page Radio, TV Radio, TV Set each item as follows. Auto TP Seek Tuner Setup TV Setup When traffic information station reception is poor, automatically searches for a station that You can set tuner related parameters. You can set the TV signal receiving areas. can be received better. Default is “ON”. Touch [ ] in the control screen. Language Select NOTE Multi function menu appears. -
Page 28: Bluetooth Control
Enter PIN code and touch [Enter]. NOTE The entered code is recognized and Searched Device List screen appears • For the cell-phones verified for compatibility, access the following URL: again. http://www.kenwood.com/cs/ce/bt/. Select the Bluetooth unit to register • The units supporting the Bluetooth function have from the list. been certified for conformity with the Bluetooth The Connection Device List screen Standard following the procedure prescribed by Bluetooth SETUP screen appears. -
Page 29: Playing Bluetooth Audio Device
Return to the Top page Return to the Top page Bluetooth Operation Bluetooth Operation Connecting the Bluetooth unit Registering special Bluetooth Playing Bluetooth Audio Device unit Touch [SET] of [Paired Device List]. Bluetooth basic operation If registering cannot be completed by normal Connection Device List screen appears. operation, there is another method. -
Page 30: Using Hands-Free Unit
Return to the Top page Return to the Top page Bluetooth Operation Bluetooth Operation Making a call Select a dialing method. *1 Y ou can sort the list to begin with touched Using Hands-Free Unit character. You can use telephone function by Press the <TEL> button. connecting the Bluetooth telephone to this unit. Downloading the phonebook If you want to use your phonebook data, it is necessary to download the data from the cell-phone to this unit in advance. -
Page 31: Bluetooth Setup
Return to the Top page Return to the Top page Bluetooth Operation Bluetooth Operation Receiving a call Operations during a call Call waiting Bluetooth Setup If you receive a call during another call, you Adjust the receiver volume can answer it with the current call suspended You can register PIN code, select the device Touch [ ] to answer a phone call or or switch between the current call and to connect, and perform output setup. -
Page 32: Hands-Free Control
Return to the Top page Return to the Top page Bluetooth Operation Bluetooth Operation Registering Bluetooth unit PIN Setting up the Hands-Free SMS Use Hands-Free Control code phone Select whether to use SMS. You can perform various setup about hands- ON (Default): Uses SMS. You can set the PIN code to the Bluetooth free function. OFF: Not uses SMS. Touch [TEL SETUP] in the Hands Free unit. The code is acquired when registering screen. - Page 33 Return to the Top page Return to the Top page Bluetooth Operation Bluetooth Operation SMS (Short Message Service) Operations in the message list screen Creating a new message Changes the layout of the character keys [ABC]: Alphabetical layout Touch [Create Message] in the SMS You can use SMS function.
- Page 34 Return to the Top page Return to the Top page Bluetooth Operation Bluetooth Operation Using templates Touch desired key and enter the number you want to register. You can create a message easily by selecting the desired sentence from the template list. Touch [Create Message] in the SMS Select screen. SMS Create Menu screen appears. Touch [Template].
-
Page 35: Setting Up
Return to the Top page Return to the Top page Setting Up Setting Up System Setup etting Up Bright/Tint/Color/Contrast/Black/ Monitor Screen Setup NOTE Sharpness • Each operation in this section can be started from Adjusts each item. You can adjust image quality in iPod video, the multi function menu. picture file, menu screen, etc. Dimmer Touch [Menu] on any screen. Select dimmer mode. Press the button instructed in each TOP Menu screen appears. - Page 36 Vehicle Information Remote Sensor* Advanced: A llows you to select languages for • To cancel the touch panel adjustment, touch Displays the vehicle information. [Cancel]. respective items.* Selects a remote control signal. Default is “ON”. This function requires a commercial adaptor. • To reset to the initial status, touch [Reset]. Language Select Language Consult your Kenwood dealer for details. Selects a language. Select the language used for the control screen and setting items. See Language setup * I f you select [Advanced] for Select Mode, (P.71). the following screen appears. Text Scroll Allows scrolling of text display on the source control screen. Select from “Auto”/”Once”/”OFF”. Auto (Default): S crolls the text automatically. Once: A llows you to scroll the text only once automatically when updated.
- Page 37 Return to the Top page Return to the Top page Setting Up Setting Up Security setup EXT SW setup Setup memory NOTE • If you enter a different security code, the screen operation Set up the external switch power mode. Audio Control, AV-IN SETUP, Camera, and returns to step 4 (for the first code entry). Audio SETUP settings can be memorized. The You can set up a security code to protect Touch [EXT SW] in the System Menu • If you have pressed <Reset> button or if you memorized settings can be recalled at any your receiver system against theft.
-
Page 38: Display Setup
Return to the Top page Return to the Top page Setting Up Setting Up Follow the instruction on the screen. Panel color coordinate Display Setup NOTE • You can store the current monitor angle as the You can set the screen and button angle during power off. Touch [Memory] when Touch [Menu] on any screen. illumination color. the desired angle is selected. The selectable items differ depending on the However, the setting value returns to “0” if you Touch [SETUP]. unit. -
Page 39: Navigation Setup
Return to the Top page Return to the Top page Setting Up Setting Up Registering original color Changing background image Touch [Enter]. Navigation Setup You can register your original color. You can load an image from the connected You can set navigation parameters. Touch [Adjust] in the Panel Color USB device and set it for the background Coordinate screen. image. Touch [Menu] on any screen. Panel Color RGB Coordinate screen Before operating this procedure, it is Touch [SETUP]. -
Page 40: Camera Setup
Return to the Top page Return to the Top page Setting Up Setting Up Rear Camera* Camera Setup Software Information AV Input Setup Selects the type of rear camera to use. You can set camera parameters. Check the software version of this unit. You can set AV input parameters. CMOS-3xx: W hen the CMOS-300 series with ID 1 set is connected. Touch [Menu] on any screen. Touch [Menu] on any screen. Touch [Menu] on any screen. -
Page 41: Av Output Interface Setup
Return to the Top page Return to the Top page Setting Up Setting Up AV Output Interface Setup External Device Control You can select an AV source to be output at Control the external device power supply. the AV OUTPUT port. Default is “VIDEO1”. Touch [EXT SW] in the Source Control Touch [Menu] on any screen. screen. Touch [SETUP]. SETUP Menu screen appears. Touch [AV-OUT]. -
Page 42: Controlling Audio
Return to the Top page Return to the Top page Audio Setting Up Audio Setting Up Crossover network setup Subwoofer ontrolling Audio You can set a crossover frequency of Select if you are using a subwoofer. speakers. Tweeter • Set up speakers (P.82) NOTE Touch the speaker to set the crossover You can set the tweeter when you are • Set up your car type (P.84) • Each operation in this section can be started from... - Page 43 Return to the Top page Return to the Top page Audio Setting Up Audio Setting Up Car type setup Speaker location setup DSP select Elevation In the Car Type screen, touch You can setup the car type and speaker You can select whether using DSP (Digital You can raise the sound position heard from [Location]. network, etc. Signal Processor) System. the speakers virtually. Speaker Location screen appears. Touch [Car Type] in the Audio SETUP Touch [Bypass] or [Through] of [DSP Touch [Elevation] in the Audio SETUP...
-
Page 44: Controlling General Audio
Return to the Top page Return to the Top page Audio Setting Up Audio Setting Up Controlling equalizer manually Loudness Controlling General Audio Equalizer Control This setting cannot be performed when you Turns the loudness control function on or select [iPod] in the Equalizer screen. Touch [Audio Control]. off. If turned on, high and low tones are You can adjust equalizer by selecting the automatically enhanced during low volume. optimized setting for each category. Touch [EQ] in the Equalizer screen. Settable only when zone function (P.89) is set If you use , you can also adjust... -
Page 45: Zone Control
Return to the Top page Return to the Top page Audio Setting Up Audio Setting Up Highway sound setting Controlling equalizer manually Zone Control NOTE You can boost a certain range of sound that Touch [Tone] in the Equalizer screen. • When the rear speaker sound is switched, the becomes hard to hear due to road noise. You can select different sources for both audio source that is output at the AV OUTPUT Set each item as follows. front and rear positions in the vehicle. -
Page 46: Listening Position
Return to the Top page Return to the Top page Audio Setting Up Audio Setting Up Position DTA Control Listening Position NOTE • Make fine adjustment of the delay time of the You can fine-adjust your listening position. You can adjust the sound effects according speaker output specified here to have a more to your listening position. suitable environment for your vehicle. In Position screen, touch [Adjust]. • If you specify the distance from the center of the Touch [Position]. Select the speaker you wish to adjust currently set listening position to every speaker, by touching speaker icon. -
Page 47: Battery Installation
Music CD media including DVD, VCD, and CD. Track number/Play time TV mode Audio files Switch to this mode when controlling TV. Folder number/File number NAV mode Radio (DNX7210BT and DNX5210BT only) Frequency value Switch to this mode when controlling navigation function. Enter the number of the content you want to play using the numeric keypad. NOTE • When controlling a player that is not integrated in... - Page 48 Return to the Top page Return to the Top page Remote Controller Operation Remote Controller Operation Location of Function Name the mode switch VOICE AUD, TV Switches navigation display on/off. Displays the DVD menu. Turns the playback control on or off while playing VCD. Speaks the voice guidance. 10 VIEW AUD, DVD, TV Switches the AV source to be output. Switches between 2D and 3D map displays. 11 MAP DIR AUD, DVD, TV Switches the display angle each time it is pressed. Switches between the heading up navigation and north up navigation map displays. 12 5/∞...
-
Page 49: Problems And Solutions
• Cannot set up the high pass filter. protection circuit is activated and • Cannot select the output The dual zone function Set the dual zone function to on. you may not be able to operate destination of the subsource in is disabled. See Zone Control (P.89). the unit. the dual zone. Mecha Error The disc player is malfunctioning. Eject the disc and try inserting it again. Contact • Cannot adjust the volume of the the Kenwood dealer if this indicator continues rear speakers. blinking or the disc cannot be ejected. • Cannot set up the equalizer. The dual zone function Set the dual zone function to off. Disc Error An unplayable disc is inserted. Change the disc. • Cannot set up the crossover is enabled. See Zone Control (P.89). See Playable Media And Files (P.100). network. “DSP Select” is set to Set “DSP Select” to “Through”. -
Page 50: Resetting The Unit
Return to the Top page Return to the Top page Troubleshooting Troubleshooting Error Message Cause Solution Resetting The Unit USB Device The connected USB device is rated Check the USB device. Some trouble may have Error!! a current capacity higher than the occurred to the connected USB device. If the unit or the connected unit fails to operate properly, reset the unit. allowable limit. Change the source to any source other than Press the <Reset> button. USB. Remove the USB device. The unit returns to factory settings. Authorization Connection to the iPod has failed. -
Page 51: Appendix
¡% • Although the audio files are complied with CD-EXTRA Only music CD session can be played. the standards listed above, the play may be ‡ HDCD impossible depending on the types or conditions ¡P of media or device. CCCD × • An online manual about audio files is put on the Others Dualdisc × site, www.kenwood.com/cs/ce/audiofile/. Super audio CD Only CD layer can be played. On this online manual, detailed information and notes which are not written in this manual are *1 Incompatible with 8 cm (3 inch) discs. provided. Make sure to read through the online ‡ : Playback is possible. manual as well. % : Playback is partly possible. × : Playback is impossible. NOTE • When buying DRM enabled contents, check the Registration Code in the DivX setup (P.43). Each time a file with the displayed code is played and protected against copying, the code changes. • DivX can be played only from a DVD disc media. -
Page 52: Status Bar Indicator Items
• iPhone 3GS CA-U1EX (option) is recommended. (However, LOUD 1chST/2chST maximum supply current of CA-U1EX is 500mA.) • iPhone 3G The loudness control function is on. Identifies the stereo audio output of channel Normal playback is not guaranteed when a cable • iPhone 1 or 2. other than the USB compatible cable is used. ■ DVD/CD NOTE Usable SD card (DNX7210BT Identifies the left audio output. FO-REP • For the conformity information on iPod/iPhone and DNX5210BT only) software, access Folder repeat function is on. Identifies the monaural audio output. www.kenwood.com/cs/ce/ipod/. The unit is capable of playback of SD/SDHC • By connecting your iPod/iPhone to this unit with A disc is inserted. memory cards complying with the SD or Identifies the right audio output. an optional accessory iPod connection cable • White: A Disc is inside the unit. -
Page 53: Region Codes In The World
Return to the Top page Return to the Top page Appendix Appendix ■ USB ■ Tuner Region Codes In The World FO-REP AUTO1 The DVD players are given a region code according to the country or area it is marketed, as The folder repeat function is on. Seek mode is set to AUTO1. shown in the following map. VIDEO AUTO2 Identifies the video file. Seek mode is set to AUTO2. MUSIC MONO Identifies the music file. The forced monaural function is on. PICTURE Identifies the picture file. The AF search function is on. The random function is on. The Radio Data System station is sending EON. The repeat function is on. -
Page 54: Dvd Language Codes
Audio Decoder Audio Decoder English Maori Thai : Linear PCM/Dolby Digital/dts/MP3/WMA/AAC : MP3/ WMA/ AAC/ WAV Esperanto Macedonian Tigrinya Video Decoder Spanish Malayalam Turkmen : MPEG1/ MPEG2/ DivX ■ SD (DNX7210BT, DNX5210BT) Estonian Mongolian Tagalog Wow & Flutter Compatible File System Basque Moldavian Setswana : Below Measurable Limit : FAT 12/16/32 Persian Marathi Tongan Frequency Response... - Page 55 Middle: 1kHz ± 10dB Selectivity (± 400 kHz) • AVRCP (Audio/Video Remote Control Profile) Treble: 10kHz ± 10dB NOTE • OPP (Object Push Profile) : ≥ 80 dB • PBAP (Phonebook Access Profile) • Although the effective pixels for the liquid crystal Stereo Separation ■ External SW (DNX7210BT) • Multi Profile support panel is given as 99.99% or more, 0.01% of pixels : 35 dB (1 kHz) Maximum Power Supply Current may not light or may light incorrectly. DNX5210BT, DNX5510BT, DNX4210BT : 500 mA • HFP (Hands Free Profile) ■ AM tuner section Specifications subject to change without notice.
-
Page 56: About This Unit
CLASS 1 and Batteries (applicable for EU ■ Copyrights DivX video. Visit divx.com for more information and countries that have adopted separate LASER PRODUCT software tools to convert your files into DivX videos. • The Bluetooth word mark and logos are owned by waste collection systems) the Bluetooth SIG, Inc. and any use of such marks • ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® Products and batteries with the symbol (crossed-out by JVC KENWOOD Corporation is under license. device must be registered in order to play purchased The label is attached to the chassis/case and says wheeled bin) cannot be disposed as household waste. Other trademarks and trade names are those of their DivX Video-on-Demand (VOD) movies. To obtain your that the component uses laser beams that have been Old electrical and electronic equipment and batteries respective owners. registration code, locate the DivX VOD section in your classified as Class 1. It means that the unit is utilizing should be recycled at a facility capable of handling device setup menu. Go to vod.divx.com for more • The “AAC” logo is a trademark of Dolby Laboratories. - Page 57 Declaration of Conformity with regard to the EMC Directive 2004/108/EC Declaration of Conformity with regard to the R&TTE Directive 1999/5/EC Manufacturer: JVC KENWOOD Corporation 3-12, Moriyacho, Kanagawa-ku, Yokohama-shi, Kanagawa 221-0022, JAPAN EU Representative’s: Kenwood Electronics Europe BV Amsterdamseweg 37, 1422 AC UITHOORN, The Netherlands English Magyar Hereby, Kenwood declares that this unit DNX7210BT, DNX5510BT, Alulírott, Kenwood, kijelenti, hogy a jelen DNX7210BT, DNX5510BT, DNX5210BT, DNX4210BT is in compliance with the essential DNX5210BT, DNX4210BT megfelel az 1999/5/EC irányelvben requirements and other relevant provisions of Directive 1999/5/EC. meghatározott alapvető követelményeknek és egyéb vonatkozó előírásoknak. Français Par la présente Kenwood déclare que l’appareil DNX7210BT, Svenska DNX5510BT, DNX5210BT, DNX4210BT est conforme aux exigences Härmed intygar Kenwood att denna DNX7210BT, DNX5510BT,...