Kenwood DNX7190HD Quick Start Manual
  1. Manuals
  2. Brands
  3. Kenwood Manuals
  4. GPS
  5. DNX7190HD
  6. Quick start manual

Kenwood DNX7190HD Quick Start Manual

Hide thumbs Also See for DNX7190HD:
Table of Contents

Advertisement

Quick Links

See also: Instruction Manual

Advertisement

Table of Contents
loading

Related Manuals for Kenwood DNX7190HD

Summary of Contents for Kenwood DNX7190HD

  • Page 17 DNX7190HD/DNX7 490BT /DNX6990HD/DNX6190HD/DNX6490BT /DNX5190/DNX5060EX Control the music you are listening to on the source control screen. The following symbols indicate the keys on the screen. The functions of the keys are the same despite the difference of the source you are listening to.
  • Page 25 DNX7190HD/DNX7490BT/DNX6990HD/DNX6190HD/DNX6490BT/DNX5190/DNX5060EX GPS antenna Microphone unit Check the installation position of GPS antenna is installed inside of QJ)). the microphone (accessory the car. It should be installed as 2) Remove oil and other dirt from horizontally as possible to allow easy the installation surface.
  • Page 28 Quick Start Guide Connecting wires to terminals {2) Accessory Ignition key Iii'\-... switch \!!r'"' Red (I nition wire) Yellow (Batte wire) Carfuse box Light Blue/Yellow (Steering remote control wire) To steering remote STEERINGWHEEi REMOTE CONT To use the steering wheel remote control feature, _R!~~~E:~~~T-~ ___J."...
  • Page 29 DNX7190HD/DNX7 490BT /DNX6990HD/DNX6190HD/DNX6490BT /DNX5190/DNX5060EX System connection Refer to the box1 below Refer to the box2 below :-- :-- AV input (CA-C3AV; Optional accessory) Accessory (g) Rear View Camera Input r------- -Yellow (Visual Input) ~---, @K@) :-_. AudioNisual Output r@ . .
  • Page 30 Optional accessory connection iPod (commercially available) USB device (commercially available) m--... KCA-iP202 (Optional Accessory) USB terminal (O.Sm) USB terminal USB maximum power supply USB terminal current :DC SV:-:-:: 1 A DNX7190HD/ DNX6990HD/ DNX6190HD/ DNX5190/ DNX5060EX only SIRIUS XM Satellite Radio tuner -30-...
  • Page 34 Record the serial number, found on the back of the unit, in the spaces designated on the warranty card, and in the space provided below. Refer to the model and serial numbers whenever you call upon your Kenwood dealer for information or service on the product.

  • Page 35: Table Of Contents

    Remote Controller ontents Battery Installation __________________ 100 Functions Of The Before Use Bluetooth Control Remote Controller Buttons __________ 101 Registering And Connecting How To Read This Manual Troubleshooting Bluetooth Unit ____________________ 64 Basic Operations Playing Bluetooth Audio Device _______ 67 Problems And Solutions ______________ 104 Using Hands-Free Unit _______________ 68 Functions Of The Buttons...

  • Page 36: Before Use

    Introduces some tips, notes, etc. does not operate normally after a while, • If you use a remote controller, you can jump • Do not watch or fix your eyes on the unit’s directly to the desired track/file with entering the consult your Kenwood dealer. display when you are driving for any track/folder/file number, play time, etc. For details, Reference mark “Direct search mode”...

  • Page 37: Basic Operations

    • In this manual, each model name is abbreviated as follows. • When the panel is opened, pressing closes the panel and pressing for 1 DNX7190HD and DNX7490BT: second ejects the disc forcibly. If above icon is showed, read the article applicable to the unit you use.
  • Page 38 Return to the Top page Return to the Top page Basic Operations Basic Operations DNX6990HD/DNX6190HD/DNX6490BT/DNX5190/DNX5060EX Number Name Motion fi (Reset) • If the unit or the connected unit fails to operate properly, the unit returns to factory settings when this button is pressed (P.107). • If the SI function is turned on, this indicator flashes when the vehicle ignition is off (P.80).

  • Page 39: Turning On The Unit

    Return to the Top page Return to the Top page Basic Operations Basic Operations Initial setup urning On The Unit Perform this setup when you use this unit first time or when you reset the unit (P.107). The method of turning on is different depending on the model. Set each item as follows. Press the <MENU> button. Language Select the language used for the control screen and setting items. Default is “American English (en)”. 1 Touch [SET].

  • Page 40: How To Play Media

    Return to the Top page Return to the Top page Basic Operations Basic Operations Touch [Finish]. ● To eject the disc: ow To Play Media Press the <0> button. Music CD and disc media Press the <0> button. USB device Connect the USB device with the USB cable.

  • Page 41: Operating With The Top Menu Screen

    Return to the Top page Return to the Top page Basic Operations Basic Operations ● Customizing Top Menu screen perating With The Top Menu Screen Drag the icon you want to register to the upper line. Most functions can be performed from the Top Menu screen. You can move up to three icons. Touch [Menu] on any screen. NOTE • If [Menu] is not displayed during video/picture playback, press the...

  • Page 42: Common Operations

    Return to the Top page Return to the Top page Basic Operations Basic Operations Flick scrolling ommon Operations You can scroll the list screen by flicking the screen up/down or right/left. Introduces the common operations. General There are some functions which can be operated from most screens. [Menu] Returns to the Top Menu screen. (RETURN) Returns to previous screen. (common menu key) Touch to display the common menu. The contents of the menu are as follows.

  • Page 43: Navigation Operation

    Return to the Top page Return to the Top page Basic Operations Basic Operations Touch [ ] or [ ] in the navigation screen. avigation Operation For details on the navigation function, please refer to the Navigation Instruction Manual. Display the navigation screen Press the <NAV> button. Touching this area displays the audio screen. : D isplays the navigation and control : D isplays the navigation and current keys of the current source.

  • Page 44: Dvd/Video Cd (Vcd) Operation

    Return to the Top page Return to the Top page DVD, VCD DVD, VCD 5 Sub function menu VD/Video CD (VCD) Operation The following functions can be performed by using keys in this area. • Repeats the current content: Touch [ ].

  • Page 45: Dvd Disc Menu Operation

    Return to the Top page Return to the Top page DVD, VCD DVD, VCD Multi function menu Highlight control DVD Disc Menu Operation Highlight control lets you control the DVD You can set up some items in the DVD-VIDEO menu by touching the menu key directly on disc menu. the screen. The functions of each key are as follows. Touch illustrated area during Touch [Highlight] in the Menu Control playback. [4] [¢] screen.

  • Page 46: Zoom Control For Dvd And Vcd

    Return to the Top page Return to the Top page DVD, VCD DVD, VCD Touch the key which corresponds to Menu/Subtitle/Audio Language* DVD Setup NOTE desired setting item. Language setup (P.26). • For DVD, please refer to DVD Play Mode Setting You can set up the DVD playback functions.
  • Page 47 Return to the Top page Return to the Top page DVD, VCD DVD, VCD Language setup Parental level Disc setup This setting is for the language used in the Sets a parental level. You cannot setup this Performs setup when using disc media. menu, subtitle, and voice. You cannot setup item during DVD playback. Touch [SET] of [DISC SETUP]. these items during DVD playback. Touch [SET] of [Parental Level]. DISC SETUP screen appears. Touch [SET] of the desired Parental Pass screen appears.

  • Page 48: Cd/Audio And Visual Files/ Ipod Operation

    Return to the Top page Return to the Top page CD, Disc, iPod, USB device CD, Disc, iPod, USB device 4 Multi function menu D/Audio And Visual Files/iPod Operation Various functions can be performed by using keys in this area. For details on the menu, see Multi function menu (P.32).
  • Page 49 Return to the Top page Return to the Top page CD, Disc, iPod, USB device CD, Disc, iPod, USB device USB device and iPod Picture/video screen NOTE • The screen shot below is for USB device. It may be different from the one for iPod. Simple Control screen List Control screen 9 Searching file area (picture/video file only)
  • Page 50 Return to the Top page Return to the Top page CD, Disc, iPod, USB device CD, Disc, iPod, USB device Multi function menu Sub function menu Music CD Disc media Music CD Disc media iPod USB device iPod USB device The following functions can be performed by using keys in this area.

  • Page 51: Search Operation

    Return to the Top page Return to the Top page CD, Disc, iPod, USB device CD, Disc, iPod, USB device Other search Category search (USB device and iPod only) Link search (USB device and iPod only) Search Operation Touch the desired category from the Touch the desired item from the left When you want to narrow the list down, You can search music, video or picture files...
  • Page 52 Return to the Top page Return to the Top page CD, Disc, iPod, USB device CD, Disc, iPod, USB device Touch [ 3 ] on the selected artwork. Folder search (USB device and disc Picture search (USB device only) Search from album artwork media only) The first song in the album is played.

  • Page 53: Movie Control

    Return to the Top page Return to the Top page CD, Disc, iPod, USB device CD, Disc, iPod, USB device Favorite list Touch the desired artwork in the Movie Control favorite list. You can create an original playlist of your favorite 10 albums by selecting album You can adjust the movie playback from a artworks. disc media. Touch and drag the desired album In the playback screen, touch artwork in the lower line to the upper illustrated area.
  • Page 54 Return to the Top page Return to the Top page CD, Disc, iPod, USB device CD, Disc, iPod, USB device Multi function menu Device select PANDORA® internet radio Operation You can display a Device select screen for You can listen to the PANDORA® internet radio on this unit by controlling the application device selection. installed in the iPhone or Bluetooth device. The following functions can be performed by To enter PANDORA mode, touch [Pandora] icon in the Top Menu screen. Touch [ ] in the control screen. using keys in this area.

  • Page 55: Usb/Ipod/Divx Setup

    Return to the Top page Return to the Top page CD, Disc, iPod, USB device CD, Disc, iPod, USB device Station list screen USB setup iPod setup USB/iPod/DivX Setup You can perform the following functions You can perform setup when using USB/ Set each item as follows. Set each item as follows. from this screen.
  • Page 56 Return to the Top page Return to the Top page CD, Disc, iPod, USB device CD, Disc, iPod, USB device DivX setup (DNX7490BT/ DNX6490BT) This feature is available only for Central and South America sales area. Set each item as follows. DivX(R) Registration Code Checks the registration code. This code is needed when making a disc which has DRM (Digital Rights Management).

  • Page 57: Radio, Hd Radio™ Tuner And Sirius Xm Radio Operation

    ] and enter the desired number. For details, see Direct search (P.53). • HD Radio broadcasting can be received only by the DNX7190HD, DNX6990HD, and DNX6190HD. The bar in center (tuner only) shows the current frequency location. • HD Radio broadcasting is for North American sales area only.

  • Page 58: Sirius Xm Basic Operation

    Return to the Top page Return to the Top page Radio, HD Radio, SIRIUS XM Radio, HD Radio, SIRIUS XM AUDIO] SIRIUS XM Basic Operation Touch to display the Audio Control screen. See Controlling Audio (P.90). Most functions can be controlled from the source control screen. EXT SW] Touch to control the external device power supply. For details, see External Device Control (P.88).
  • Page 59 Return to the Top page Return to the Top page Radio, HD Radio, SIRIUS XM Radio, HD Radio, SIRIUS XM 5 Sub function key [ REAR Touch to display “Sub function menu” (7 in this table). Touch to mute the rear speaker. 6 Music information Displays the information of the current music: Channel Name, Artist Name, Song Title, Content Info, Category Name, Channel Description, Similar Channels...

  • Page 60: Memory Operation

    Return to the Top page Return to the Top page Radio, HD Radio, SIRIUS XM Radio, HD Radio, SIRIUS XM Manual memory Search by program type Direct search (SIRIUS XM and Memory Operation (FM tuner and HD Radio tuner HD Radio tuner only) You can store the current receiving station or only) Auto memory...

  • Page 61: Traffic Information

    Return to the Top page Return to the Top page Radio, HD Radio, SIRIUS XM Radio, HD Radio, SIRIUS XM Category/Channel search Traffic Information Receive Mode (HD Radio tuner (SIRIUS XM and HD Radio (FM Tuner and HD Radio tuner only) tuner only) Only)

  • Page 62: Itunes Tagging

    You can tag your music using an iTunes message appears to allow you to switch the Tagging enabled HD Radio tuner and SIRIUS current channel to the relevant channel. XM receiver. When you hear a song you enjoy on When the broadcast of the registered your local HD Radio tuner or SIRIUS content starts, an Alert screen XM, you only have to press the <ATT> appears. button (DNX7190HD) or <TEL> button (DNX6990HD/ DNX6190HD/ DNX5190/ DNX5060EX) for 1 second. List control screen appears. The song’s information will then be saved on this unit. The saved songs will then show Touch [ up in a playlist called “Tagged” in iTunes the Information list appears. very next time you sync your iPod to your computer. So then you just need to click and Scroll down the list and confirm then easily buy and download the song you “Tagging Information”...

  • Page 63: Instant Replay

    Return to the Top page Return to the Top page Radio, HD Radio, SIRIUS XM Radio, HD Radio, SIRIUS XM Parental code Program list Instant Replay SIRIUS XM Setup Touching this plays back the displayed (SIRIUS XM only) You can set a SIRIUS XM parental code. program. NOTE Touch [Change] of [Parental Code] in [Info Change]...
  • Page 64 Return to the Top page Return to the Top page Radio, HD Radio, SIRIUS XM Radio, HD Radio, SIRIUS XM Parental lock Mature setup Skip channel select You can select the channels to enable SIRIUS You can automatically limit children’s contact You can set the undesired channels to skip. XM Parental Lock function. with the channel for which Parental Lock is Touch [SET] of [Skip Channel Select]. not turned on when the channel is deemed Touch [SET] of [Parental Lock Channel Skip Category Select screen appears.
  • Page 65 Return to the Top page Return to the Top page Radio, HD Radio, SIRIUS XM Radio, HD Radio, SIRIUS XM Content alerts setup City select for Content alerts You can turn on or off the Content alerts You can select a city for which traffic function. information or weather forecast is to be received with the Content alerts function. Touch [ON] or [OFF] of [Content alerts] in the SIRIUS XM SETUP screen.

  • Page 66: Bluetooth Control

    Bluetooth unit. NOTE • For the cell-phones verified for compatibility, Enter PIN code and touch [Enter]. access the following URL: http://www.kenwood.com/cs/ce/bt/. The entered code is recognized and Searched Device List screen appears • The units supporting the Bluetooth function have again.

  • Page 67: Playing Bluetooth Audio Device

    Return to the Top page Return to the Top page Bluetooth Operation Bluetooth Operation Connecting the Bluetooth unit Registering special Bluetooth Playing Bluetooth Audio Device unit Touch [SET] of [Paired Device List]. Bluetooth basic operation If registering cannot be completed by normal Connection Device List screen appears. operation, there is another method.

  • Page 68: Using Hands-Free Unit

    Return to the Top page Return to the Top page Bluetooth Operation Bluetooth Operation Making a call Select a dialing method. *1 Y ou can sort the list to begin with touched Using Hands-Free Unit character. You can use telephone function by Press the <TEL> button. connecting the Bluetooth telephone to this unit. Downloading the phonebook If you want to use your phonebook data, it is necessary to download the data from the cell-phone to this unit in advance.

  • Page 69: Bluetooth Setup

    Return to the Top page Return to the Top page Bluetooth Operation Bluetooth Operation Receiving a call Operations during a call Muting Audio Volume upon Reception Bluetooth Setup of Phone Call (DNX5190 only) Adjust the receiver volume When a call is received or you answer a call, You can register PIN code, select the device Touch [ ] to answer a phone call or the Call Interrupt screen appears and system to connect, and perform output setup.

  • Page 70: Hands-Free Control

    Return to the Top page Return to the Top page Bluetooth Operation Bluetooth Operation Registering Bluetooth unit PIN Setting up the Hands-Free SMS Use Hands-Free Control code phone Select whether to use SMS. You can perform various setup about hands- ON (Default): Uses SMS. You can set the PIN code to the Bluetooth free function. OFF: Not uses SMS.
  • Page 71 Return to the Top page Return to the Top page Bluetooth Operation Bluetooth Operation SMS (Short Message Service) Operations in the message list screen Creating a new message Changes the layout of the character keys [ABC]: Alphabetical layout Touch [Create Message] in the SMS You can use SMS function.
  • Page 72 Return to the Top page Return to the Top page Bluetooth Operation Bluetooth Operation Using templates Touch desired key and enter the number you want to register. You can create a message easily by selecting the desired sentence from the template list. Touch [Create Message] in the SMS Select screen. SMS Create Menu screen appears. Touch [Template].

  • Page 73: Setting Up

    Return to the Top page Return to the Top page Setting Up Setting Up Beep System Setup etting Up Turns the key touch tone on or off. Default is “ON”. Bright/Tint/Color/Contrast/Black/ Monitor Screen Setup NOTE Remote Sensor Sharpness • Each operation in this section can be started from Selects a remote control signal.
  • Page 74 Return to the Top page Return to the Top page Setting Up Setting Up Language setup Touch panel adjustment EXT SW setup Setup memory Touch [SET] of [Language] in the User Set up the external switch power mode. Audio Control, AV-IN SETUP, Camera, and Interface screen. Touch [Touch] in the System Menu Audio SETUP settings can be memorized. The screen.

  • Page 75: Display Setup

    Return to the Top page Return to the Top page Setting Up Setting Up Follow the instruction on the screen. Panel color coordinate Registering original color Display Setup You can register your original color. You can set the screen and button Touch [Adjust] in the Panel Color Touch [Menu] on any screen. illumination color.

  • Page 76: Navigation Setup

    Return to the Top page Return to the Top page Setting Up Setting Up Changing background image Touch [Enter]. NAV Interrupt Speaker Navigation Setup Selects speakers used for voice guidance of the You can load an image from the connected navigation system. You can set navigation parameters. USB device and set it for the background Front L: Uses the front left side speaker for image.

  • Page 77: Camera Setup

    Return to the Top page Return to the Top page Setting Up Setting Up Rear Camera* Camera Setup Software Information AV Input Setup Selects the type of rear camera to use. You can set camera parameters. Check the software version of this unit. You can set AV input parameters. CMOS-3xx: When the CMOS-300 series with ID 1 set is connected.

  • Page 78: Av Output Interface Setup

    Return to the Top page Return to the Top page Setting Up Setting Up AV Output Interface Setup External Device Control You can select an AV source to be output at Control the external device power supply. the AV OUTPUT port. Default is “VIDEO1”. Touch [EXT SW] in the Source Control Touch [Menu] on any screen. screen. Touch [SETUP]. SETUP Menu screen appears. Touch [AV-OUT].

  • Page 79: Controlling Audio

    Return to the Top page Return to the Top page Audio Setting Up Audio Setting Up Crossover network setup Subwoofer ontrolling Audio You can set a crossover frequency of Select if you are using a subwoofer. speakers. Tweeter • Set up speakers (P.90) NOTE Touch the speaker to set the crossover You can set the tweeter when you are • Set up your car type (P.92)
  • Page 80 Return to the Top page Return to the Top page Audio Setting Up Audio Setting Up Car type setup Speaker location setup DSP select Elevation In the Car Type screen, touch You can setup the car type and speaker You can select whether using DSP (Digital You can raise the sound position heard from [Location]. network, etc. Signal Processor) System. the speakers virtually. Speaker Location screen appears. Touch [Car Type] in the Audio SETUP Touch [Bypass] or [Through] of [DSP Touch [Elevation] in the Audio SETUP...

  • Page 81: Controlling General Audio

    Return to the Top page Return to the Top page Audio Setting Up Audio Setting Up Controlling equalizer manually Loudness Controlling General Audio Equalizer Control This setting cannot be performed when you Turns the loudness control function on or select [iPod] in the Equalizer screen. Touch [Audio Control]. off. If turned on, high and low tones are You can adjust equalizer by selecting the automatically enhanced during low volume.

  • Page 82: Zone Control

    Return to the Top page Return to the Top page Audio Setting Up Audio Setting Up Highway sound setting Controlling equalizer manually Zone Control NOTE You can boost a certain range of sound that Touch [Tone] in the Equalizer screen. • When the rear speaker sound is switched, the becomes hard to hear due to road noise.

  • Page 83: Listening Position

    Return to the Top page Return to the Top page Audio Setting Up Audio Setting Up Position DTA Control Listening Position NOTE • Make fine adjustment of the delay time of the You can fine-adjust your listening position. You can adjust the sound effects according speaker output specified here to have a more to your listening position.

  • Page 84: Remote Controller

    Return to the Top page Return to the Top page Remote Controller Operation Remote Controller Operation Functions Of The Remote Controller Buttons emote Controller Switching the operation mode Direct search mode This unit can be operated using the remote controller. For , DNX6990HD, and DNX6490BT, the remote controller is supplied with the unit. The functions operated from the remote Using the remote controller, you can jump For DNX6190HD, DNX5190, and DNX5060EX, the remote controller is the optional accessory controller differ depending on the position directly to the desired file, track chapter, etc. (KCA-RCDV331). of the mode switch.
  • Page 85 Return to the Top page Return to the Top page Remote Controller Operation Remote Controller Operation Location of Function Name the mode switch VOICE Switches navigation display on/off. Displays the DVD menu. Turns the playback control on or off while playing VCD. Speaks the voice guidance.

  • Page 86: Troubleshooting

    The disc player is malfunctioning. Eject the disc and try inserting it again. Contact • Cannot adjust the volume of the the Kenwood dealer if this indicator continues rear speakers. blinking or the disc cannot be ejected. • Cannot set up the equalizer.

  • Page 87: Resetting The Unit

    Return to the Top page Return to the Top page Troubleshooting Troubleshooting Error Message Cause Solution Resetting The Unit USB Device The connected USB device is rated Check the USB device. Some trouble may have Error!! a current capacity higher than the occurred to the connected USB device.

  • Page 88: Appendix

    • An online manual about audio files is put on the Others Dualdisc × site, www.kenwood.com/cs/ce/audiofile/. Super audio CD Only CD layer can be played. On this online manual, detailed information and notes which are not written in this manual are *1 Incompatible with 8 cm (3 inch) discs.

  • Page 89: Status Bar Indicator Items

    The VCD version is 1. • When the iPod is connected to this unit, VER2 The repeat function is on. “KENWOOD” or “✓” is displayed on the iPod to The VCD version is 2. indicate that you cannot operate the iPod. C-REP The chapter repeat function is on.

  • Page 90: Region Codes In The World

    Return to the Top page Return to the Top page Appendix Appendix ■ USB ■ HD Radio reception Region Codes In The World FO-REP AUTO1 The DVD players are given a region code according to the country or area it is marketed, as The folder repeat function is on. Seek mode is set to AUTO1. shown in the following map. VIDEO AUTO2 Identifies the video file.

  • Page 91: Dvd Language Codes

    Return to the Top page Return to the Top page Appendix Appendix Total Harmonic Distortion DVD Language Codes Specifications DNX7190HD, DNX7490BT : 0.008 % (1 kHz) ■ Monitor section Code Language Code Language Code Language DNX6990HD, DNX6190HD, DNX5060EX, DNX6490BT, Afar...
  • Page 92 Preout Level (V) Antenna • OPP (Object Push Profile) DNX7190HD, DNX7490BT : External GPS antenna • PBAP (Phonebook Access Profile) ■ Digital FM tuner section (DNX7190HD, : 4 V/ 10 kΩ ■ General • Multi Profile support DNX6990HD, DNX6190HD) DNX6990HD...

  • Page 93: About This Unit

    The user could lose the authority to (2)this device must accept any interference, including by JVC KENWOOD Corporation is under license. created by DivX, LLC, a subsidiary of Rovi Corporation. operate this equipment if an unauthorized change or...
  • Page 94 Return to the Top page Return to the Top page Appendix Appendix DNX7490BT/DNX6490BT: ■ The marking of products using lasers CLASS 1 LASER PRODUCT The label is attached to the chassis/case and says that the component uses laser beams that have been classified as Class 1.
  • Page 95 This HD Radio receiver enables:...
  • Page 96 GPS NAVIGATION SYSTEM SYSTEME DE NAVIGATION GPS SISTEMA DE NAVEGACIÓN GPS DNX7190HD DNX6990HD DNX6190HD DNX5190 DNX5060EX GPS NAVIGATION INSTRUCTION MANUAL MANUEL D'INSTRUCTIONS DE NAVIGATION DU GPS MANUAL DE INSTRUCCIONES DE NAVEGACIÓN GPS © B64-4944-08...
  • Page 97 Contents Getting Started End-User License Agreements Using the Navigation System Help When You Need It Find It and Go! The Main Pages Finding a Restaurant Viewing the Map Page Following Your Route Using myTrends Adding a Via Point Trip Computer Taking a Detour Resetting Trip Information Stopping the Route...
  • Page 98 Traffic Information Appendix Understanding FM TMC Traffic Updating the Software Traffic in Your Area Updating the Map Data Traffic on Your Route Safety Cameras Viewing the Traffic Map Custom POIs (Points of Interest) Viewing Traffic Delays Finding Custom POIs Deleting Custom POIs Saving Trip Logs Customizing the Settings Customizing the Navigation System...

  • Page 99: End-User License Agreements

    End-User License Agreements Software License Agreement IMPORTANT: READ THIS LICENCE CAREFULLY BEFORE USING THIS PRODUCT. INSTALLING, BY USING THE DNX7190HD / DNX6990HD, COPYING OR OTHERWISE USING THIS PRODUCT DNX6190HD / DNX5190 / DNX5060EX, YOU AGREE INDICATES YOUR ACKNOWLEDGEMENT THAT TO BE BOUND BY THE TERMS AND CONDITIONS OF YOU HAVE READ THIS LICENCE AND AGREE TO THE FOLLOWING SOFTWARE LICENSE AGREEMENT.
  • Page 100 Disclaimer of liability. GARMIN AND ITS nüMaps™ Lifetime. If you purchase a nüMaps LICENSORS (INCLUDING THEIR LICENSORS AND Lifetime subscription (sold separately), you will receive up to four (4) Map Data updates per year, SUPPLIERS) SHALL NOT BE LIABLE TO YOU: IN RESPECT OF ANY CLAIM, DEMAND OR ACTION, when and as such updates are made available on Garmin’s website, for one (1) compatible Garmin...
  • Page 101 End-User License Agreements fees, arising out of or in connection with any use Australia Limited (www.psma.com.au). In addition, or possession by you of the Product (including the the Product incorporates data which is ©2010 Data). Telstra Corporation Limited, GM Holden Limited, Intelematics Australia Pty Ltd, Sentinel Content Pty Canadian map data.
  • Page 102 and all disputes, claims and actions arising from THIS AGREEMENT. IF YOU DO NOT AGREE TO THE or in connection with the Data provided to you TERMS OF THIS AGREEMENT, PROMPTLY (within 7 hereunder. days of purchase) RETURN THE PRODUCTS AND ANY ACCOMPANYING ITEMS (including written Government end users.
  • Page 103 End-User License Agreements liability for damage in excess of the license fee paid from Her Majesty the Queen in Right of Canada, for the Licensed Product(s). with permission of Natural Resources Canada. You shall indemnify and hold DMTI Spatial, its NAVTEQ Traffic™...
  • Page 104 Garmin product. In addition, NAVTEQ (and its States government or any other entity seeking affiliates) and Garmin Ltd. (and its subsidiaries) or applying rights similar to those customarily make no warranty with regard to the reliability, claimed by the United States government, this accuracy, exhaustiveness, and completeness of Data is a “commercial item”...

  • Page 105: Getting Started

    Getting Started The first time you use your Kenwood Navigation System, you need to set up your system. The Help menu provides additional information. Help When You Need It WARNING Touch Tools > Help to get more information See "Safety Precautions and Important Information"...

  • Page 106: Find It And Go

    Find It and Go! The Where To? page provides several different categories for you to use when searching for addresses, cities, and other locations. The detailed map loaded in your navigation system contains millions of points of interest, such as restaurants, hotels, and auto services. Finding a Restaurant Select a place.

  • Page 107: Following Your Route

    Find It and Go! Following Your Route Adding a Via Point As you travel, your navigation system guides you You can add a stop (Via Point) to your route. The to your destination with voice prompts, arrows navigation system gives you directions to the on the map, and directions at the top of the stop and to your final destination.

  • Page 108: Where To

    Where To? The Where To? page provides several different categories you can use to search for locations. ➎ Searching Near Another Location Touch to view more information about the location. Your navigation system automatically searches for places near your current location. Touch Where To? >...

  • Page 109: Finding A Place By Spelling The Name

    Where To? Finding a Place by Spelling the Name Finding Places in a Different Area If you know the name of the location you are You can search for locations in a different area, looking for, you can spell it using the on-screen such as a different city or near your destination.

  • Page 110: Favorites

    Favorites You can save all of your favorite places in Favorites. You can also save your home location in Favorites. Saving Places You Find Saving Your Current Location After you have found a place you want to Touch View Map. save, touch Save on the Go! page.

  • Page 111: Viewing Saved Places

    Favorites Viewing Saved Places Deleting a Favorite Touch Where To?. Touch Tools > My Data. Touch Favorites. Touch Delete Favorite(s). Touch a category. Select the Favorite to delete. Touch Delete. Editing Saved Places Touch Where To? > Favorites. Touch the location you want to edit. Touch Press for More.

  • Page 112: The Main Pages

    The Main Pages This section provides details about the Map page, the Trip Computer, myTrends™, the Turn List, Lane assist, and the GPS Info page. Viewing the Map Page Drive to the Favorite several times. Touch View Map to open the map. Touch an When myTrends information appears in area of the map to see additional information, the navigation bar, touch it to view route...

  • Page 113: Turn List Page

    The Main Pages Turn List Page About Junction View When you are navigating a route, the Turn List When available, the Lane Assist page may page displays turn-by-turn instructions for your display a view of the upcoming junction and entire route and the distance between turns. in which lane you should be driving.

  • Page 114: Creating And Editing Routes

    Creating and Editing Routes This section describes how to create and customize your routes. Creating a New Custom Route Saving and Modifying the Active Route Touch Where To? (or Tools) > Routes > New. Touch Where To? (or Tools) > Routes. Touch Add New Start Point.

  • Page 115: Adding A Detour To A Route

    Creating and Editing Routes Adding a Detour to a Route Using Multiple Route Preview If a road on your route is closed or congested ⁄ with traffic, you can take a detour. • See page 24 to enable multiple route preview with Route Preferences.

  • Page 116: Using Ecoroute

    Using ecoRoute ™ The ecoRoute feature calculates your vehicle fuel economy, carbon footprint, and the fuel price of navigating to a destination, and offers tools for improving fuel efficiency. About ecoRoute Enter the distance you have traveled since the last fill up. The data provided by the ecoRoute feature is only an estimate.

  • Page 117: Hiding Your Ecochallenge Score

    Resetting Your Score Exporting a Mileage Report You can restart your current ecoChallenge. Connect a USB mass storage device to your Kenwood unit. While viewing the current ecoChallenge details, touch Reset > Yes. Touch Tools > ecoRoute > Mileage Report.
  • Page 118 You can add other FM TMC subscriptions at any time. Check the Garmin Touch Traffic On Route. Web site at www.garmin.com/kenwood for other available services. Touch the arrows to view other traffic delays on your route, if necessary.

  • Page 119: Customizing The Settings

    Customizing the Settings You can customize the settings of your GPS navigation system. Customizing the Navigation System Changing the Navigation Settings Touch Settings. Touch Settings > Navigation. • Route Preference—select a preference for calculating Touch the setting you want to change. your route.
  • Page 120 Updating the Time Settings Touch Settings > Time. • Time Format—select a 12-hour, 24-hour, or UTC time format. • Current Time—select Automatic to update the time automatically. When Automatic is not selected, you can adjust the time in 15-minute increments. •...
  • Page 121 Safety Cameras To update the navigation system software, you WARNING must have a USB mass storage device and an Garmin and Kenwood are not responsible for the Internet connection. accuracy of, or the consequences of using, a safety camera database.
  • Page 122 Saving Trip Logs WARNING Trip logs are recorded while you navigate a route. Garmin and Kenwood are not responsible for the consequences of using custom POI databases, or ⁄ for the accuracy of custom POI databases. • Trip log data is saved as a .gpx file.
  • Page 123 For the latest free software updates (excluding map data) throughout the life of your Garmin products, visit the Garmin Web site at www.garmin.com/Kenwood. © 2011 Garmin Ltd. or its subsidiaries Garmin International, Inc. 1200 East 151st Street, Olathe, Kansas 66062, USA Garmin (Europe) Ltd.
  • Page 124 KENWOOD Ver.1.0 WOl -2029-05...
  • Page 125 This updater can be used to update the firmware of the following models. Updating the Program DNX9990HD DNX9210BT 1. Connect the USB memory. DNX7190HD DNX7490BT DNX7210BT DNX7310BT DNX7310BTM 2. When an audio file is played or “No Media File” is displayed,...
  • Page 126 Dear Customer, panneau en cas devol ou d'endommagement. Thank you for purchasing this kenwood product. As mentioned in the pages of this booklet, our warranty is only Aten~ao: valid in the countries listed. If your country is not listed please contact your retailer for information on warranty Em caso de dano ou perda do painel frontal, este Certificado de Garantia e a Nota Fiscal procedure, or write to;...
  • Page 127 KENWOOD LECTRONICS CANADA INC. (ci·apr!s appelee Cettegarantie represen ntif!re garantie donnee par ecrit BRASIL JVC KENWOOD DO BRASIL COMERCIO DE ELECTRONICOS LTDA. courant, manques d'entretiens periodiques, «KENWOOD"), donne etrillagarantie suivante !'acheteur KENWOOD. KENWOOD ne se lien! aucunemenl responsable...

This manual is also suitable for:

Dnx7490btDnx6990hdDnx5190Dnx5060exDnx6190hdDnx6490bt

Table of Contents