JVC KD-NX901 Service Manual page 25

Hdd navigation / dvd receiver

Hide thumbs Also See for KD-NX901:

Table of Contents

Enlarged version

3.2.11 Removing the spindle motor

(See Fig.21)

• Remove the mechanism control board.

Remove the two screws M attaching the spindle motor on the

bottom of the body.

Caution:

Perform adjustment when reattaching the spindle motor.

3.2.12 Removing the feed motor assembly

(See Figs.22 and 23)

• Remove the mechanism control board.

(1) Remove the feed TRI. spring on the bottom of the body.

(See Fig.22)

(2) Remove the two screws N attaching the feed motor assem-

bly. (See Fig.22)

(3) Remove the slit washer from the motor H. assembly and

pull out the worm wheel. (See Fig.23)

(4) Remove the two screws P attaching the feed motor. (See

Fig.23)

Spindle motor

Fig.21

Feed TRI. spring

Fig.22

Slit washer

Worm wheel

Motor H. assembly

Fig.23

Feed motor assembly

Feed motor

(No.MA161)1-25

Table of Contents