JVC KD-NX901 Service Manual page 12

3.1.6 Removing the HDD
(See Fig.12)
• Prior to performing the following procedure, remove the front
panel assembly, heat sink and top chassis assembly.
(1) From the inside of the top chassis assembly, remove the
four screws J attaching the HDD.
(2) Release the lock of the connector
connect the card wire from the connector CN562.
(3) Take out the HDD from the top chassis assembly.
3.1.7 Removing the DVD
(See Fig.13)
• Prior to performing the following procedure, remove the front
panel assembly, heat sink, front chassis assembly and top
chassis assembly.
(1) From the inside of the top chassis assembly, remove the
three screws K attaching the DVD.
(2) Take out the DVD from the top chassis assembly.
1-12 (No.MA161)
CN562 on the HDD, dis-
CN562
HDD
Fig.12
DVD
K
Fig.13
J
J
K