JVC KD-NX901 Service Manual page 10

3.1.4 Removing the front chassis assembly
(See Figs.7 to 9)
• Prior to performing the following procedure, remove the front
panel assembly, heat sink and top chassis assembly.
(1) From the both sides of the top chassis assembly, remove
the two screws F attaching the front chassis assembly.
(See Figs.7 and 8)
(2) From the front sides of the top chassis assembly, remove
the three screws G attaching the front chassis assembly.
(See Fig.9)
(3) Take out the front chassis assembly from the top chassis.
1-10 (No.MA161)
Top chassis assembly
Fig.7
Top chassis assembly
F
Front chassis
Fig.8
Front chassis assembly
Fig.9
F
Front chassis
G