Fan - HP EliteBook 740 G1 Maintenance And Service Manual

Fan

Description
Fan (includes cable)
Before removing the fan, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the service cover (see
5. Remove the battery (see
6. Remove the keyboard (see
7. Remove the base enclosure (see
Remove the fan:
1. Loosen the two captive Phillips screws (1) that secure the fan to the base enclosure.
2. Disconnect the fan cable (2) from the system board.
3. Remove the fan (3).
Reverse this procedure to install the fan.
Service cover on page
Battery on page 53).
Keyboard on page 65).
Base enclosure on page
51).
73).
Component replacement procedures
Spare part number
730792-001
79