Removal And Replacement Procedures For Customer Self-Repair Parts; Component Replacement Procedures; Service Cover - HP EliteBook 740 G1 Maintenance And Service Manual

5 Removal and replacement procedures for
Customer Self-Repair parts
CAUTION: The Customer Self-Repair program is not available in all locations. Installing a part not
supported by the Customer Self-Repair program may void your warranty. Check your warranty to determine
if Customer Self-Repair is supported in your location.

Component replacement procedures

This chapter provides removal and replacement procedures.
There are as many as 15 screws that must be removed, replaced, and/or loosened when servicing
the Customer Self-Repair parts. Make special note of each screw size and location during removal and
replacement.

Service cover

Description
Service cover for use only on HP EliteBook 840 models with a touch screen
Service cover for use only on HP EliteBook 740 models with a touch screen
Service cover for use only on HP EliteBook 840/HP ZBook 14 models; RCTO
Service cover for use only on HP ZBook 14 models
Service cover for use only on HP EliteBook 850 models with a touch screen
Service cover for use only on HP EliteBook 750 models with a touch screen
Service cover for use only on HP EliteBook 850 models; RCTO
Before removing the service cover, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
Remove the service cover:
1. Slide the service cover release latch (1), remove the screw (if the optional screw is being used) (2), and
then slide the release latch again (3) to release the service cover.
NOTE: If you do not want to use the optional screw, you can store it inside the service cover.
Spare part number
766324-001
784452-001
745311-001
730961-001
766327-001
784479-001
745310-001
Component replacement procedures 51