Table of Contents
Advertisement
Fingerprint reader assembly
Description
Fingerprint reader assembly for use in HP EliteBook 740/840/HP ZBook 14 models (includes cable,
bracket, and insulator)
Fingerprint reader assembly for use in HP EliteBook 750/850 models (includes cable, bracket, and
insulator)
Before removing the fingerprint reader assembly, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the following components:
a.
Service cover (see
b.
Battery (see
c.
Fan (see
d.
Keyboard (see
e.
Base enclosure (see
Remove the fingerprint reader assembly:
1.
Turn the computer upside down.
2.
Remove Mylar cover from atop the that secure the fingerprint reader assembly (1).
88
Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
Service cover on page
Battery on page
53)
Fan on page
79)
Keyboard on page
65)
Base enclosure on page
51)
73)
Spare part number
730956-001
730817-001
Hide quick links:
Advertisement
Table of Contents
