Main Unit; The Unit's Display - Panasonic Diga DMR-EH770 Operating Instructions Manual

Hide thumbs Also See for Diga DMR-EH770:
Table of Contents

Advertisement

Main unit

1
Opening the front panel
Place your finger on the protruding section below the 4 and
press down to flip open the front panel.
1 Standby/on switch (Í/I) (➡ 20)
Press to switch the unit from on to standby mode or vice versa. In
standby mode, the unit is still consuming a small amount of power.
2 Disc tray (➡ 26, 36)
3 Connection for digital video (DV) camcorder (➡ 60)
4 USB port (➡ below)
5 Connection for VCR, camcorder etc. (➡ 16, 60)
6 Display (➡ below)
7 Channel select (➡ 26)
Inserting, removing the USB memory device
You can insert the USB memory device directly into the USB port.
Preparation
Before inserting any USB memory device to this unit, ensure that the data stored therein has been backed up.
Inserting the USB memory device
Check the orientation of the USB connector and insert it straight in.
"USB" appears on the unit's display and the menu (➡ below) is automatically displayed, when a compatible
USB memory device is inserted while stopped.
USB device
Play MP3
Play Pictures (JPEG)
Copy Pictures (JPEG)
SELECT
OK
Removing the USB memory device
Complete all USB memory-related operations and pull the USB memory straight out.
≥If a USB memory being accessed is pulled out, then the data may be damaged.

The unit's display

1
6
1 Copying indicator
Lights during copy.
2 Linked timer recordings with external equipment indicator
3
Recording
indicator
REC
4 Timer recording indicator
5 Disc indicator
Lights when a disc that is supported by this unit is inserted in the
tray.
Downloaded From DvDPlayer-Manual.com Panasonic Manuals
≥Indicators for functions that this unit does not support will not light.
3
2
Press [3, 4] to select the item and press [OK].
You can proceed to each operation screen.
≥"Play MP3":
≥"Play Pictures (JPEG)": "To play still pictures on the USB memory"
RETURN
≥"Copy Pictures (JPEG)": "Copying all the still pictures on the USB
2
PLAY
7
8
Playback
Recording/
indicator
Playback indicator
REC
PLAY
PLAY
4
5
REC
8 Stop (➡ 26, 37)
9 Start play (➡ 36)
: Start recording (➡ 26)/Specify a time to stop recording (➡ 28)
; Open/close disc tray (➡ 26, 36)
< Remote control signal sensor
Rear panel terminals (➡ 14–17)
"To play MP3 files on the USB memory" (➡ 41)
(➡ 42)
memory—Copy All Pictures" (➡ 59)
3
4
REC
5
6 Drive (HDD or DVD) indicator
Lights when the HDD or DVD drive is selected.
7 Main display section indicator
8 Recording mode indicator
6
OPEN/CLOSE
REC
7
8 9
:
;
Compatible USB
memory device
<
RQT9011
13

Advertisement

Table of Contents
loading

Table of Contents