Table of Contents
Advertisement
Alpha Wheel (14)
Use the Alpha Wheel to scroll through the list of values for the currently selected
parameter—turning the Alpha Wheel counter-clockwise will select the previous value and
turning the Alpha Wheel clockwise will select the next value. You can turn the Alpha Wheel
slowly to change the value by one increment or turn it quickly to jump several increments.
– and + Buttons: Plus, Minus and Value Jump (15)
Use the + and – buttons to scroll through the list of values for the currently selected
parameter. Pressing both buttons simultaneously is referred to as the "Value Jump" double
button press. Depending on the selected parameter, Value Jump can select the next Category
default Program/Multi, jump to commonly used values, and reset parameters to default
values.
Display (12)
The LCD has 2 rows of 20 characters each. The top row shows the current context (Mode,
category, edit parameter, etc.). The lower row shows the parameter available for editing.
Text in the lower row may scroll to permit more characters to be read. You can adjust the
display contrast by turning a small potentiometer knob at the upper right of the screen.
Programmable Switches (5)
These can be assigned to any parameter in a Multi, and separately for each zone in the Multi,
to switch On and Off values. When Programs are being played, the buttons are assigned to
preset controls (such as selecting a "Variation" sound).
ASSIGN and EXIT Buttons (16)
When Using the Split function, pressing and holding the ASSIGN button allows you to set
the Split Key parameter (when selected) by striking a key on the Artis SE keyboard. In Multi
Edit Mode, pressing and holding the ASSIGN button allows you to select a Zone by pressing
a ZONE ON/OFF button. In Multi Edit Mode, pressing and holding the ASSIGN button
allows you to to set the HiKey or LoKey parameter (when selected) for the current Zone
by striking a key on the Artis SE keyboard. In Multi Edit Mode, pressing and holding the
ASSIGN button allows you to quickly select the Destination parameter for a controller of the
current Zone by moving the desired controller.
The EXIT button can be used to navigate out of Multi Edit Mode, Save dialogs, the Split/
Layer dialogs, Global Mode and Storage Mode.
Introducing Artis SE
Front Panel Overview
17
Advertisement
Table of Contents
