Setting Shutter Speed (In Lpr Mode) - Panasonic AG-CPD20P Operating Instructions Manual

Viewing Live Video

Setting shutter speed (in LPR mode)

Set a shutter speed to capture sharp video of fast-moving
subjects.
This menu is available only when [Init LPR Mode] in
administrator setup is set to "ENABLE" and [LPR Mode] is
set to "LPR".
Note:
This menu is available only when the [CAMERA 1] connector
input is selected.
1. Press the [MENU] button.
The Menu appears.
2. Confirm that [Camera1] is selected, and press
the [ ] button.
Confirm
,
3. Press the [ ] buttons to select [LPR Shutter
Speed].
The
Select
(continued)
appears.
RETURN MENU
CONTROL PANEL
ON/
OFF
,
4. Press the [
speed.
Select
AUTO: Automatically adjusts the shutter speed to ambient
light.
1/500, 1/1000: Set as required by the subject.
Note:
A recording started by a recording trigger during license plate
recognition will automatically switch the shutter speed to
the value set by Patrol Shutter Speed. When recording stop
criteria are met, the shutter speed automatically returns to
the value set in Step 4.
49
Cursor button
MENU button
] buttons to select a shutter