Connection; Connecting Audio/Video Signals - BenQ PH460 User Manual

Connection

Connecting audio/video signals

Pay attention to the following notes when you connect cables:
• Please turn off all devices.
• Familiarize yourself with the audio/video ports on the display and the devices you want
to use. Be aware that incorrect connections may adversely affect picture quality.
• Do not remove cables from the ports by pulling the cable itself. Always grasp and pull
the connectors at the end of the cable.
• Ensure that all cables are fully inserted and firmly seated.
Connecting the VGA input
1. Connect the VGA IN jack on the display to the VGA output jack on a computer
using a D-Sub (15-pin) cable.
2. Connect the computer's audio output jack to the AUDIO IN (AUDIO1) jack on the
display using a suitable audio cable.
3. To view images from this input, press the
select an appropriate audio source, see
The audio cable is not supplied and should be purchased separately.
DVI-OUT
HDMI-2
DVI-IN HDMI-1
D-Sub (15-pin) cable
button on the remote control. To
VGA
Audio Source on page 32
VGA OUT
VGA IN
Audio cable
Computer
Connection 19
for details.