Removing The Stand; Mounting The Tv On The Wall - Sharp LC-60LE925X Operation Manual

Appendix

Removing the stand

For wall mounting with the optional bracket (AN-52AG4) remove the stand.
Before setting TV on the wall.
• Remove the connected cables (DVD, VCR, etc) from the terminals.
• Detach the four caps at the 4 locations on the rear of the TV.
1
2
1
1 Unfasten the screws at the 3 locations on the
rear of the stand cover.
2 Remove the stand cover.
3
Detach the stand from the TV. (Hold the stand so it
will not drop from the edge of the base area.)

Mounting the TV on the wall

To use this TV mounted on a wall, remove the AC cord holder and the screws at the 4 locations on the rear of the
TV, and then use the screws supplied with the wall mount bracket to secure the bracket to the rear of the TV.
2
2
1
Unfasten the 4 screws used to secure the stand in
place.
NOTE
• To attach the stand, perform the above steps in reverse
order.
• As the TV is very heavy, be careful when moving it.
87