Headphone/Audio Out Select; Skipping An Input; Colour System Settings - Sharp LC-60LE925X Operation Manual

Settings when using external devices

Headphone/Audio out select

You can select which device is used for outputting
audio.
Press MENU and the MENU screen displays.
1
Press c/d to select "Setup".
2
Press b / c / d to select "Option".
3
Press a / b to select "Terminal setting", and
4
then press ENTER.
Press a / b to select "Headphone/Audio out
5
select", and then press ENTER.
Press a / b to select the desired item, and
6
then press ENTER.
Selected item
Headphone Output audio through headphones.
Audio out Output audio through an A/V receiver
or surround audio controller.
CAUTION
• This terminal is also used for headphones. Reduce the
volume before using headphones. Overwhelming sound
may damage your hearing.
NOTE
• If you select "Audio out" when a cable is inserted in the
AUDIO IN terminal, the TV speakers are muted.
• When you select "Audio out", you can adjust the TV sound
volume with the VOLk/l buttons on the TV or on the
remote control unit.
64
Description

Skipping an input

This setting allows you to skip an input on the "Input
skip" menu.
Press MENU and the MENU screen displays.
1
Press c/d to select "Setup".
2
Press b/c/d to select "Option".
3
Press a / b to select "Terminal setting", and
4
then press ENTER.
Press a / b to select "Input skip", and then
5
press ENTER.
Press a / b to select the Input (INPUT2 to
6
INPUT7) you wish to skip.
CH list
:Enter
Press c / d to select "Yes".
7
Press MENU to exit.
8

Colour system settings

You can change the colour system to one that is
compatible with the image on the screen.
Press MENU and the MENU screen displays.
1
Press c/d to select "Setup".
2
Press b/c/d to select "Option".
3
Press a / b to select "Colour system", and
4
then press ENTER.
Press a / b to select a compatible video signal
5
system of your equipment, and then press ENTER.
NOTE
• Factory preset value is "Auto".
• If "Auto" is selected, colour system for input signal is automatically
set. If an image does not display clearly, select another colour
system (e.g. PAL, NTSC 4.43).
• You can choose from "Auto", "PAL", "SECAM", "NTSC3.58" and
"NTSC4.43" in the "ATV" mode.
Menu
Setup
:Back Τerminal setting
Input skip
INPUT2
[No]
INPUT3(RGB)
Yes No
Skip Input selection of RGB
INPUT6(HDMI)
[No]
INPUT7(HDMI)
[No]
Auto
PAL
SECAM
NTSC3.58
NTSC4.43
PAL-60