Connecting A Pc; Analogue Connection; Hdmi Connection; Audio Select For Connecting A Pc - Sharp LC-60LE925X Operation Manual

Connecting a PC

Use the PC terminals to connect a PC.

Analogue Connection

Signal names for 15-pin mini D-sub connector
5 4 3 2 1
10 9 8 7 6
15 14 13 12 11

HDMI Connection

PC
HDMI-certified cable
PC
ø 3.5 mm stereo minijack cable*
DVI/HDMI cable
NOTE
* The analogue audio input is available only for INPUT3/5.
66
Pin No. Signal name
R
G
B
Not connected
CSYNC
NOTE
• Macintosh adaptor may be required for use for some Macintosh computers.
• Pin No. 5 is not used for inputting the signal.
INPUT 4,5,6,7
INPUT 4,5,6,7
RGB cable
(Commercially
available)
Ø 3.5 mm stereo
minijack cable
(Commercially
available)
Pin No. Signal name
GND (Ground)
GND (Ground)
GND (Ground)
+5V
GND (Ground)

Audio select for connecting a PC

When using the INPUT3 (PC) terminal, you must select
which terminal uses the AUDIO (R/L) jack for analogue
audio input.
Go to "MENU" s "Setup" s "Option" s "Terminal
setting" s "Audio select".
Selected item
Video When connecting devices with AV
cable to the INPUT3 (PC) terminal,
display images without audio.
When connecting a PC to the INPUT3
Video+Audio
(PC) terminal, and inputting analogue
audio signals from the AUDIO IN
terminal.
ANALOGUE
RGB
AUDIO
(L/R)
PC
Pin No. Signal name
Not connected
SDA
HD
VD
SCL
Description