American Dynamics Illustra Flex series User Manual page 7

Index # Name
1
CS Mount
2
Screw
3
Back Focus Adjustment
4
Tripod Receptacle
5
SD Card Slot
6
Video Outlet
7 RJ-45 Ethernet Connector/ PoE
8
Default Button
9
Reset Button
10
Power Indicator
11
I/O Connector
12
Power Terminal
Note Connectors and field wiring terminals for external Class 2 circuits provided with marking
indicating minimum Class of wiring to be used. Class 2 shall be marked adjacent to the field
wiring terminals.
T 1-1: P I
ABLE ICTORIAL NDEX
Description
To connect the lens with the camera
To lock back focus Adjustment
To adjust focus
To connect the camera with the tripod
To insert a SD card into this slot for recording and
storage
To output video signal
To insert the RJ-45 cable for network connection
as well as PoE (Power over Ethernet)
To Reset all settings of the unit to factory default
by pressing for 5 seconds
To reboot the unit
To indicate power status with red light
To connect Input/ Output devices
DC12V/AC24V, red port: power +/white port:
power –/ black port: GND. Make sure to connect
the power connector to correct ports (+ and –)
when the power supply is DC12V.
T 1-2: I/O C
ABLE ONNECTOR
7
Illustra Flex 1MP & 3MP Box Camera
D
EFINITION
D
EFINITION
A/I
Audio in
GND
A/O
Audio out
GND
AO
Alarm out
COM
AI
Alarm in
GND