Section 4 - Configuration
In the Settings menu on the bar on the top of the page, click Wireless to see the
wireless configuration options. In Bridge Mode, the wireless function allows you to
connect to an existing wireless network. You can either enter the settings manually,
or click Scan to search for visible wireless networks (see below).
Wireless
Enter the network name (SSID) of the network you are trying to
Network Name:
connect to.
Choose None, WEP, or WPA/WPA2-(Personal) depending on the
Security:
security used by the network you are trying to connect to.
Password
Select the length of the password used by the network you are trying
Length:
to connect to (WEP only).
Password:
Enter the existing network's wireless password. (WEP, WPA/WPA2
only)
Click Save when you are done.
To scan for available wireless networks, click Scan, then click on the wireless network
you want to connect to. You can see the wireless signal strength of each network,
and the padlock icon means that a password is required to connect to that network.
Click Select to finalize your choice, then Save when you are done.
D-Link DIR-880L User Manual
Wireless (Bridge Mode)
97