Table of Contents
Advertisement
Static IP
Connection Setting
Bridge Mode
The WAN Settings window is also used to configure the Router for multiple virtual connections (Multiple PVCs).
DSL-584T ADSL Router User Guide
Dynamic IP
default setting for
address for the WAN interface. In this case you need to change this
Static IP
setting to
. When Static IP is selected in the IP Control menu,
you need to type in the global IP address provided to you by your ISP.
IP Unnumbered
The
port protocol link through the WAN interface. An IP Unnumbered
interface does not have an IP address and therefore cannot be managed
via Telnet or any other TCP/IP application.
If you have selected the
the global IP address used for your WAN interface. Your ISP should
provide this IP address to you.
Select the desired option: Always ON, Connection On Demand, or
Manual. Most users will want to choose the default connection setting,
Always ON.
WAN Settings window – Bridge Mode
22
. Some users will be given a specific IP
option is used if you want to set up a non-TCP/IP
Static IP
option in the IP Control menu, type in
Advertisement
Table of Contents
