Section 4 - Configuration
The Quick VPN feature is a fast and easy way to create a profile for secure remote
access to a Local Area Network (LAN). This profile can be used to configure other
devices to connect to your LAN via a secure VPN tunnel.
In the Features menu on the bar on the top of the page, click Quick VPN. Click
Advanced Settings... to expand the list and see all of the options.
L2TP over
To allow Quick VPN access to your network, click Enable.
IPSec:
Username:
Enter a username of your choice.
Password:
Enter a password of your choice.
PSK:
Enter a pre-shared key (PSK). Clients attempting to connect to your
network through a VPN will need to enter this key.
Save
iOS users can quickly and easily establish a VPN using a VPN
configuration file. Click Save to export these settings as a VPN profile,
Configuration
To Local Hard
allowing anyone with the file to connect to your network on an iOS
Drive:
device.
Select either MSCHAPv2, PAP, or CHAP.
Authentication
Protocol:
MPPE:
Select either None, RC4-40, or RC4-128.
Click Save when you are done.
D-Link DIR-880L User Manual
Quick VPN
114