Preparation 2 - Placing Copy Paper; Acceptable Media Types - Toshiba e-studio 165 Operator's Manual For Copying Functions

Preparation 2 - Placing Copy Paper

Place copy paper in an appropriate paper source before you start copying.

Acceptable media types

Acceptable media types differ depending on its paper source. See the table below for the details.
Feeder
Drawers of
the equip-
ment and
Paper Feed
Unit
(optional)
Drawers of
the Paper
Feed Ped-
estal
(optional)
Bypass tray Plain paper
*1 "Maximum sheet capacity" refers to the maximum number of sheets when TOSHIBA-recommended
paper is used. See the following page for the TOSHIBA-recommended paper:
P.36 "Recommended paper"
*2 The paper of 13 to 16 lb. Bond can be used if it is set on the bypass tray one by one.
*3 Automatic duplex copying is not available.
*4 Be sure to use the overhead transparencies that TOSHIBA recommends. When transparencies other
than the TOSHIBA-recommended ones are used, this could cause an equipment malfunction.
You cannot mix various paper sizes in one drawer.
Abbreviations for LT format sizes:
LT: Letter, LD: Ledger, LG: Legal, ST: Statement, COMP: Computer
Media type
Plain paper LT format:
(17 - 20 lb. Bond) LD, LG, LT, LT-R, COMP, 13"LG
A/B format:
A3, A4, A4-R, B4, B5, B5-R, FOLIO
Plain paper LT format:
(17 - 20 lb. Bond) LD, LG, LT, LT-R, ST-R, COMP, 13"LG
A/B format:
A3, A4, A4-R, A5-R, B4, B5, B5-R, FOLIO
LT format:
*2 LD, LG, LT, LT-R, ST-R, COMP, 13"LG
(17 - 20 lb. Bond)
A/B format:
A3, A4, A4-R, A5-R, B4, B5, B5-R, FOLIO
THICK PAPER 1
*3
(21 - 28 lb. Bond)
THICK PAPER 2
(29 lb. Bond - 90 lb.
*3
Index)
Tracing paper
*3
(20 lb.)
*3
Sticker labels
*3, *4
LT only
Transparencies
Paper size

Preparation 2 - Placing Copy Paper

Maximum sheet
*1
capacity
250 sheets
(17 lb. Bond)
250 sheets
(20 lb. Bond)
550 sheets
(17 lb. Bond)
550 sheets
(20 lb. Bond)
100 sheets
(17 lb. Bond)
100 sheets
(20 lb. Bond)
1 sheet
(21 - 28 lb. Bond)
1 sheet
(29 lb. Bond - 90
lb. Index)
1 sheet
1 sheet
1 sheet
35